Product Description of Dynabrade 52438 5" (127mm) Dia. 7 Degree Offset Cut-Off Wheel Tool, Central Vacuum
• Vacuum Cut-Off Wheel Tool, for efficient cutting with dust and debris removal.
• 5" Diameter, Right Angle, 1 hp, 12,000 RPM, Rear Exhaust.
• Ideal for use with optional 5" diameter Diamond Cut-Off Wheels. Adjustable wheel guard has vacuum port (1-1/4" outside diameter) that diverts airborne dust and debris to to optional vacuum source.
• Powerful, high-quality air motor is effective for cutting through metals, thick fiberglass over-wrap and fiber spray.
• Blade guide allows operator to expose up to 1-1/8" depth of Cut-Off Wheel if required. Safety-lock lever is included.
Parts Manuals for the Dynabrade 52438 5" (127mm) Dia. 7 Degree Offset Cut-Off Wheel Tool, Central Vacuum
Find the five digit number for your part(s) in the parts manual below, and click the link to open a new tab where you can add it to your basket. Please note that depending on the age of your tool this may not be the correct parts manual - it should however state the range of serial numbers to which it applies at the top left/right of the first page.
Current Manual
Tune-Up Kit
Book a Dynabrade Repair
Vibration & Sound Readings for the Dynabrade 52438 5" (127mm) Dia. 7 Degree Offset Cut-Off Wheel Tool, Central Vacuum
Important Notice:
The vibration and sound readings provided for the Dynabrade 52438 5" (127mm) Dia. 7 Degree Offset Cut-Off Wheel Tool, Central Vacuum are based on laboratory testing carried out under controlled conditions.
Actual levels in use can vary significantly depending on factors such as the abrasive material, application, tool maintenance, and operator technique.
These figures should therefore be used as a guideline only. DynaShop and Dynabrade accept no liability for any decisions or assessments made using the listed data instead of measurements taken under your specific operating conditions.
| Vibration Level EN1296 (m/s²) | Uncertainty EN1296 (m/s²) | Vibration Test Method |
|---|---|---|
| 2.5 | 1.2 | S1049 |
| Sound Pressure (dBA) | Sound Power (dBA) |
|---|---|
| 81 | 92 |
Would you like this data emailed to you?
Fill out the form below and we’ll send the vibration and sound data for the Dynabrade 52438 5" (127mm) Dia. 7 Degree Offset Cut-Off Wheel Tool, Central Vacuum directly to your inbox.
On-Site Tool Demonstrations of the Dynabrade 52438 5" (127mm) Dia. 7 Degree Offset Cut-Off Wheel Tool, Central Vacuum
Please complete the form below to arrange a tool demonstration for the Dynabrade 52438 5" (127mm) Dia. 7 Degree Offset Cut-Off Wheel Tool, Central Vacuum or any of the Dynabrade range of tooling. Alternatively please call us on 01273 468736.