Dynabrade 40330 Dynafile II Abrasive Belt Tool, Central Vacuum

Description

Product Description of the Dynabrade 40330 Dynafile II Abrasive Belt Tool, Central Vacuum

Contact Arms for the Dynabrade 40330 Dynafile II Abrasive Belt Tool, Central Vacuum

Contact arms are able to extend the capabilities of your Dynabrade 40330 Dynafile II Abrasive Belt Tool, Central Vacuum as each arm is capable of carrying out a variety of different tasks. Contact arms can make difficult to reach areas easier to access and can also be used for specific purposes such as corner weld removal, strap polishing on tubes, seam removal on pipes or deburring edges. A number of contact arms also have platen pads for flat filing, which can be purchased and replaced when worn.

On-Site Tool Demonstrations and Video of Dynabrade 40330 Dynafile II Abrasive Belt Tool, Central Vacuum

Vibration Readings for the Dynabrade 40330 Dynafile II Abrasive Belt Tool, Central Vacuum

Vibration readings for the Dynabrade 40330 Dynafile II Abrasive Belt Tool, Central Vacuum are dependent on a number of factors that include the abrasive being used, the job in hand and operator experience. DynaShop or Dynabrade cannot be held responsible for the consequences of using the listed values for risk assessment, rather than actual values unique to each situation.

	Vibration Level EN1296 (m/sec²)	Uncertainty EN1296 (m/sec²)	Vibration Test Method
Current (3 Axis)	Under 2.5	1	ISO 20643
Previous (Dominant Axis)	Under 2.5	0.3	S1056

Would you like this data in an email?

Simply fill out the form below and the vibration data for the Dynabrade 40330 Dynafile II Abrasive Belt Tool, Central Vacuum will be sent to your email automatically.

You can down load the HSE leaflet that explores the jobs which are affected; how to assess and control the risk; what employees need to know; and health surveillance measures. It will help you understand what you need to do to comply with the Control of Vibration at Work Regulations 2005 (The Vibration Regulations 2005).

Health and Safety Executive: Hand-Arm Vibration Guide

Please Note:

Published vibration levels are in accordance with standards EN 12096, ISO 20643 and ISO 28927 series; published sound levels are in accordance with standard ISO 15744. Vibration and sound levels shown are the result of laboratory testing in conformity with these codes and standards, but are not sufficient for risk evaluation. Values measured in a specific workplace may differ from declared values. Actual exposure values and associated risk will be unique to each workplace and workstation. Potential risk to each individual depends on a variety of factors such as workstation design, surrounding environment, operator proficiency, material being worked and amount of exposure time. The employer is responsible for adhering to any applicable legal requirements regarding workplace health and safety and for evaluation of actual vibration and sound levels based on factors affecting the workplace environment. DynaShop or Dynabrade cannot be held responsible for the consequences of using the listed values for risk assessment, rather than actual values unique to each situation.

Sound and Decibel Readings of the Dynabrade 40330 Dynafile II Abrasive Belt Tool, Central Vacuum

Sound Pressure (dBA)	Sound Power (dBA)
84	95

The Control of Noise at Work Regulations 2005 (Noise Regulations 2005) require employers to prevent or reduce risks to health and safety from exposure to noise at work.

Would you like this data in an email?

Simply fill out the form below and the vibration data for the Dynabrade 40330 Dynafile II Abrasive Belt Tool, Central Vacuum will be sent to your email automatically.

Parts Manuals for the Dynabrade 40330 Dynafile II Abrasive Belt Tool, Central Vacuum