01273 468736

DynaShop Owned and Operated by SAIC

Dynabrade 49420 .4 HP Angle-Head Die Grinder

MRP: £1,083.60

£956.07 +VAT

Dynabrade 49420 .4 HP Angle-Head Die Grinder, Non-Vacuum

Compare

Description

Product Description of Dynabrade 49420 .4 HP Angle-Head Die Grinder

• Includes 50055 Collet Assembly and extended rear exhaust muffler to reduce noise levels.
• Governor-controlled motor maintains speed under load.
• Optional 54585 Side Handle Assembly is available.
• Lightweight thermal-insulated housing reduces cold air transmission and vibration to the operator.
• Safety-lock lever is included.

The Dynabrade 49420 .4 HP Angle-Head Die Grinder is a Dynabrade tool within the Die Grinder category of tooling range. Spindles of can be used which can also be supplied by DynaShop. A Non-Vacuum tool with a maximum RPM of 3200, a power rating (hp/W) of 0.4 (298) with a weight of kg.

Parts Manuals for the Dynabrade 49420 .4 HP Angle-Head Die Grinder

Find the five digit number for your part(s) in the parts manual below, and enter it in the search box at the top of the page to add it to your basket. Please note that depending on the age of your tool this may not be the correct parts manual - it should however state the range of serial numbers to which it applies at the top left/right of the first page.

Current Manual

Tune-Up Kit

Book a Dynabrade Repair

If you would like to book a repair for the Dynabrade 49420 .4 HP Angle-Head Die Grinder please use the form below. You will then receive an email - simply place a copy of this email in the box with your tool and send it to the address stated in the email.

Vibration & Sound Readings for the Dynabrade 49420 .4 HP Angle-Head Die Grinder

Vibration readings for the Dynabrade 49420 .4 HP Angle-Head Die Grinder are dependent on a number of factors that include the abrasive being used, the job in hand and operator experience. DynaShop or Dynabrade cannot be held responsible for the consequences of using the listed values for risk assessment, rather than actual values unique to each situation.

Vibration Level EN1296 (m/sec²) Uncertainty EN1296 (m/sec²) Vibration Test Method
N/A N/A ISO 8662-13

Sound Pressure (dBA) Sound Power (dBA)
80 91

Would you like this data in an email?

Simply fill out the form below and the vibration data for the Dynabrade 49420 .4 HP Angle-Head Die Grinder will be sent to your email automatically.

On-Site Tool Demonstrations of the Dynabrade 49420 .4 HP Angle-Head Die Grinder

Please complete the form below to arrange a tool demonstration for the Dynabrade 49420 .4 HP Angle-Head Die Grinder or any of the Dynabrade range of tooling. Alternatively please call us on 01273 468736.

Book a Tool Demonstration

    For our privacy policy please click here.

Video of the Dynabrade 49420 .4 HP Angle-Head Die Grinder

Additional information

Model Number

49420

Tool Type

Air Inlet Thread

1/4" NPT

Vacuum Type

Max. RPM

Configuration

Power HP (W)

Consumable Shape

Other Specifications

,

Vibration Level (m/sec²)

Uncertainty

Vibration Method

Sound Pressure (dBA)

Sound Power (dBA)