01273 468736

DynaShop Owned and Operated by SAIC

Specialist advice to reduce your process times and improve efficiency, with the aim of saving you time & money.
For Orders £100+
Send us your air tools for servicing to get them back up and running as good as new, with free advice on preventative maintenance.

Dynabrade Buffing Tools For Marine Manufacturing & Repair

Right Angle Two-Hand Buffers

6″-8″ Diameter Air-Powered Buffing Tools

• Utilised for effective buffing and final finishing.
• Running at the optimum speed of 2,000 RPM means this buffer is actually polishing out scratches, not melting them into the surface, as faster buffers often do.
• Run our slow-speed, high torque buffer with a foam or wool buff (sold separately) for a quick and efficient finishing system.
• Soft-grip handle can be positioned for right or left hand operation.


Right Angle 6″-8″ Diameter Wet Sanders

• All models run 5″, 6″, or 8″ diameter polishing pads. Pads sold separately.
• Water is fed through the center of pad directly to the work surface, providing optimum flushing of work surface and pad. This prevents build-up of sanding residue on the disc, allowing the tool to be used efficiently in any position.
• Independent water rinse allows flushing of the work surface without starting the tool.
• High torque air motor with variable speed. Rear exhaust muffler reduces noise levels.
• Safety-lock throttle and soft-grip handle (adjusts to left or right hand).
• Basic models include pre-assembled hook-ups, 95848 Gear Oil (2.5 oz. tube) and 95541 Grease Gun.
• Delux models include the above, as well as overhose assembly to reduce sound level and 96323 Air Line (3/8″).

Model 51474 (Basic) 0-2,000 RPM, 5/8″-11 Thread
Model 51479 (Deluxe) 0-2,000 RPM, 5/8″-11 Thread
Model 51604 (Deluxe) 0-2,000 RPM, M14 Thread


Air-Powered Buffing Tools, 3″ and 5″ Diameter

• Features a 14mm diameter offset orbit.
• Tools run at 10,000 or 12,000 RPM free speed.
• Patented balancer compensates for vibration when running under load resulting in a smooth operating performance.
• Ideal for use on moulds and plugs.

Model 57126 (3″ Diameter)
• Excellent for buffing out sanding scratches.
• Runs at 10,000 RPM free speed; 7,000 RPM under load.

Model 55126 (3″ Diameter)
• Offers increased .5 horsepower and speed, to reduce buffing time by up to 40%.
• Runs at 12,000 RPM free speed; 7,500 RPM under load.
• Front exhaust helps to cool foam buffing pad, increasing life of pad.

Model 58455 (5″ Diameter)
• Large diameter allows buffing of wider area in less time.
• Runs at 10,000 RPM free speed; 5,500 RPM under load.


Showing all 8 results