Description
Product Description of Dynabrade 57583 5" (127mm) Dia. Wet Dynorbital Supreme Random Orbital Sander, Deluxe, Non-Vacuum (Discontinued)
• Deluxe model includes 1/4" (6 mm) diameter x 11' (3,353 mm) long water line and 1/4" (6 mm) diameter x 10' (3,048 mm) long air line. Both are neatly contained in 3/4" (19 mm) diameter overhose.
• Includes adjustable water-feed valves at two locations: one near the water source connection and another at the tool. This allows one valve to be pre-set to your desired flow rate, while the other is utilized as an on/off valve.
• Includes non-vacuum, hook-face, short nap, 3/8" (10 mm) thick sanding pad (54325).
• 3/32" (2.5 mm) Diameter Random Orbit for swirl-free finishes.
The Dynabrade 57583 5" (127mm) Dia. Wet Dynorbital Supreme Random Orbital Sander, Deluxe, Non-Vacuum (Discontinued) has a Refined Ergonomic Tool Grip that allows for a more comfortable grip and feel, reducing operator fatigue and increasing efficiency. Perfectly-balanced, weight-mated sanding pad with exclusive single-piece hub design. Dynabrade premium urethane pads offer smoother operating performance and minimal vibration. To read our guide on choosing the correct Dynorbital please click here.
Parts Manuals for the Dynabrade 57583 5" (127mm) Dia. Wet Dynorbital Supreme Random Orbital Sander, Deluxe, Non-Vacuum (Discontinued)
Find the five digit number for your part(s) in the parts manual below, and click the link to open a new tab where you can add it to your basket. Please note that depending on the age of your tool this may not be the correct parts manual - it should however state the range of serial numbers to which it applies at the top left/right of the first page.
Current Manual
Tune-Up Kit
Book a Dynabrade Repair
Vibration & Sound Readings for the Dynabrade 57583 5" (127mm) Dia. Wet Dynorbital Supreme Random Orbital Sander, Deluxe, Non-Vacuum (Discontinued)
Please note – The vibration readings provided for the Dynabrade 57583 5" (127mm) Dia. Wet Dynorbital Supreme Random Orbital Sander, Deluxe, Non-Vacuum (Discontinued) are based on laboratory results in very specific sets of conditions. Vibration levels are dependent on a number of factors that include, among many others; the abrasive being used, the job in hand and operator experience. DynaShop or Dynabrade cannot be held responsible for the consequences of using the listed values for risk assessment, rather than real-world values measured in your own specific application.
| Vibration Level EN1296 (m/sec²) | Uncertainty EN1296 (m/sec²) | Vibration Test Method |
| 2.9 | 1.5 | ISO 8662-8 |
| Sound Pressure (dBA) | Sound Power (dBA) |
| 76 | 87 |
Would you like this data in an email?
Simply fill out the form below and the vibration data for the Dynabrade 57583 5" (127mm) Dia. Wet Dynorbital Supreme Random Orbital Sander, Deluxe, Non-Vacuum (Discontinued) will be sent to your email automatically.
On-Site Tool Demonstrations of the Dynabrade 57583 5" (127mm) Dia. Wet Dynorbital Supreme Random Orbital Sander, Deluxe, Non-Vacuum (Discontinued)
Please complete the form below to arrange a tool demonstration for the Dynabrade 57583 5" (127mm) Dia. Wet Dynorbital Supreme Random Orbital Sander, Deluxe, Non-Vacuum (Discontinued) or any of the Dynabrade range of tooling. Alternatively please call us on 01273 468736.
