Dynabrade 93361 Sa-3m Cylinder Shaped Burr, 9.5mm D X 19mm Flute X 3mm Shank

Description

Product Description of the Dynabrade 93361 Sa-3m Cylinder Shaped Burr, 9.5mm D X 19mm Flute X 3mm Shank

Dynabrade 93361 Sa-3m Cylinder Shaped Burr, 9.5mm D X 19mm Flute X 3mm Shank

DYNABURR CARBIDE BURRS
Shanks available in 1/8", 3 MM, 1/4" and 6 MM / 1 Item per box

APPLICATIONS For rapid material removal, precise finishing, deburring and removal of parting lines and flash
FEATURES AND BENEFITS
- Longer life than high-speed steel burrs
- Double cut
TARGET MARKETS Casting and Forging, Metal Fabrication

The Dynabrade 93361 Sa-3m Cylinder Shaped Burr, 9.5mm D X 19mm Flute X 3mm Shank is a Burr with a size of 9.5x19x3mm and a vacuum type of Non-Vacuum. The Dynabrade 93361 Sa-3m Cylinder Shaped Burr, 9.5mm D X 19mm Flute X 3mm Shank can be fitted to the category/categories and can be purchased directly from us. If you have any queries with regards to the Dynabrade 93361 Sa-3m Cylinder Shaped Burr, 9.5mm D X 19mm Flute X 3mm Shank please do not hesitate in contacting us on the number above, email or start a web chat.

Dynabrade Tool Manuals

If you need parts we have available all Dynabrade tool manuals (both past and present.) Please search for your parts manual below using the 5 digit model number of your tool, which will then give you a breakdown and diagram of all the parts for that specific model. With these part numbers you can search for the correct parts for your tool and simply place an order for these online.

Dynabrade Parts

When looking for parts online please keep a note of your tool's serial number, as in some cases the model may have been re-designed and therefore have a new manual. You can check whether a manual is suitable for your model by looking at the top left hand corner of the first page, which will generally reference the range of serial numbers to which it applies. If you already know your part number, please enter it in the box below. Add rows to add more parts. [wcbulkorder]

Service & Repair

If you are unsure of how to replace the necessary parts and wish to maximize the value, reliability and safety of your Dynabrade tools, have them repaired by Dynabrade factory experts. Dynabrade operate a service and repair centre in the UK and all work is carried out by qualified Dynabrade engineers, with 98% of all repairs and services completed within 48 hours.

BOOK A REPAIR

Recommended Tools for the Dynabrade 93361 Sa-3m Cylinder Shaped Burr, 9.5mm D X 19mm Flute X 3mm Shank