Description
Product Description of Dynabrade 57923 4" W x 4-1/2" L (102mm x 114mm) Dynabug "Model T" Orbital Sander (Discontinued)
• 3/32" diameter orbital action is ideal for fine finishes. Lightweight only 1 lb! Palm-style, ergonomic design features low profile grip for greater operator comfort and control. Operates 8-9 SCFM at 90 PSIG. Can be run by as little as 3 horsepower compressor.
• Low maintenance; easy to repair. Turbine-style vaneless air motor needs no oil!
• Easy interchangeable sanding pads. Uses reattachable and PSA (adhesive-backed) abrasive sheets and discs; coated and non-woven nylon.
• Includes 57998, 4-1/4" x 4-1/2", Quarter-Sheet Hook-Face Pad.
The Dynabrade 57923 4" W x 4-1/2" L (102mm x 114mm) Dynabug "Model T" Orbital Sander (Discontinued) has a Refined Ergonomic Tool Grip that allows for a more comfortable grip and feel, reducing operator fatigue and increasing efficiency. Perfectly-balanced, weight-mated sanding pad with exclusive single-piece hub design. Dynabrade premium urethane pads offer smoother operating performance and minimal vibration. To read our guide on choosing the correct Dynorbital please click here.
Parts Manuals for the Dynabrade 57923 4" W x 4-1/2" L (102mm x 114mm) Dynabug "Model T" Orbital Sander (Discontinued)
Find the five digit number for your part(s) in the parts manual below, and click the link to open a new tab where you can add it to your basket. Please note that depending on the age of your tool this may not be the correct parts manual - it should however state the range of serial numbers to which it applies at the top left/right of the first page.
Current Manual
Tune-Up Kit
Book a Dynabrade Repair
Vibration & Sound Readings for the Dynabrade 57923 4" W x 4-1/2" L (102mm x 114mm) Dynabug "Model T" Orbital Sander (Discontinued)
Please note – The vibration readings provided for the Dynabrade 57923 4" W x 4-1/2" L (102mm x 114mm) Dynabug "Model T" Orbital Sander (Discontinued) are based on laboratory results in very specific sets of conditions. Vibration levels are dependent on a number of factors that include, among many others; the abrasive being used, the job in hand and operator experience. DynaShop or Dynabrade cannot be held responsible for the consequences of using the listed values for risk assessment, rather than real-world values measured in your own specific application.
| Vibration Level EN1296 (m/sec²) | Uncertainty EN1296 (m/sec²) | Vibration Test Method |
| Under 2.5 | 1.3 | ISO 8662-8 |
| Sound Pressure (dBA) | Sound Power (dBA) |
| 70 | 81 |
Would you like this data in an email?
Simply fill out the form below and the vibration data for the Dynabrade 57923 4" W x 4-1/2" L (102mm x 114mm) Dynabug "Model T" Orbital Sander (Discontinued) will be sent to your email automatically.
On-Site Tool Demonstrations of the Dynabrade 57923 4" W x 4-1/2" L (102mm x 114mm) Dynabug "Model T" Orbital Sander (Discontinued)
Please complete the form below to arrange a tool demonstration for the Dynabrade 57923 4" W x 4-1/2" L (102mm x 114mm) Dynabug "Model T" Orbital Sander (Discontinued) or any of the Dynabrade range of tooling. Alternatively please call us on 01273 468736.
