Description
Product Description of Dynabrade 57909 6" (152mm) Dia. Wet Dynabug "Model T" Orbital Sander, Non-Vacuum (Discontinued)
• Each model includes all hardware for self-siphoning with 20 ft. of water hose. Brass weight drops into bucket for ease of use. Lightweight, only 1.5 lbs! Palm-style, ergonomic design features low profile grip for greater operator comfort and control.
• Up to 3/16" diameter orbital action, with adjustable speed control. 5" and 6" diameter pads are interchangeable. Fast, smooth and uniform surface preparation; reduces labor time.
• Our unique water feed through-the-pad design allows use of standard round wet paper with holes. No special sand paper or hole punch needed! Fingertip control valve allows for precise water flow.
• Includes standard 58093 Hook-Face Pad and soft 53980 Interface Pad for contours.
The Dynabrade 57909 6" (152mm) Dia. Wet Dynabug "Model T" Orbital Sander, Non-Vacuum (Discontinued) has a Refined Ergonomic Tool Grip that allows for a more comfortable grip and feel, reducing operator fatigue and increasing efficiency. Perfectly-balanced, weight-mated sanding pad with exclusive single-piece hub design. Dynabrade premium urethane pads offer smoother operating performance and minimal vibration. To read our guide on choosing the correct Dynorbital please click here.
Parts Manuals for the Dynabrade 57909 6" (152mm) Dia. Wet Dynabug "Model T" Orbital Sander, Non-Vacuum (Discontinued)
Find the five digit number for your part(s) in the parts manual below, and enter it in the search box at the top of the page to add it to your basket. Please note that depending on the age of your tool this may not be the correct parts manual - it should however state the range of serial numbers to which it applies at the top left/right of the first page.
Current Manual
Tune-Up Kit
Book a Dynabrade Repair
Vibration & Sound Readings for the Dynabrade 57909 6" (152mm) Dia. Wet Dynabug "Model T" Orbital Sander, Non-Vacuum (Discontinued)
Vibration readings for the Dynabrade 57909 6" (152mm) Dia. Wet Dynabug "Model T" Orbital Sander, Non-Vacuum (Discontinued) are dependent on a number of factors that include the abrasive being used, the job in hand and operator experience. DynaShop or Dynabrade cannot be held responsible for the consequences of using the listed values for risk assessment, rather than actual values unique to each situation.
| Vibration Level EN1296 (m/sec²) | Uncertainty EN1296 (m/sec²) | Vibration Test Method |
| Under 2.5 | 1.3 | ISO 8662-8 |
| Sound Pressure (dBA) | Sound Power (dBA) |
| 76 | 87 |
Would you like this data in an email?
Simply fill out the form below and the vibration data for the Dynabrade 57909 6" (152mm) Dia. Wet Dynabug "Model T" Orbital Sander, Non-Vacuum (Discontinued) will be sent to your email automatically.
On-Site Tool Demonstrations of the Dynabrade 57909 6" (152mm) Dia. Wet Dynabug "Model T" Orbital Sander, Non-Vacuum (Discontinued)
Please complete the form below to arrange a tool demonstration for the Dynabrade 57909 6" (152mm) Dia. Wet Dynabug "Model T" Orbital Sander, Non-Vacuum (Discontinued) or any of the Dynabrade range of tooling. Alternatively please call us on 01273 468736.
