01273 468736

DynaShop Owned and Operated by SAIC

ON-SITE TOOL DEMONSTRATIONS
Specialist advice to reduce your process times and improve efficiency, with the aim of saving you time & money.
BOOK SITE VISIT ›
FREE DELIVERY
For Orders £100+
TOOL SERVICING & REPAIRS
Send us your air tools for servicing to get them back up and running as good as new, with free advice on preventative maintenance.
BOOK TOOL REPAIR ›

Dynabrade 56747 1 HP Straight-Line Die Grinder, Central Vacuum

MRP: £712.53

£570.59 +VAT

Go to Parts Manual

Dynabrade 56747 1 HP Straight-Line Die Grinder, Central Vacuum


FINANCE OPTIONS AVAILABLE

PAY FROM £15.76 PER MONTH

Description

Product Description of Dynabrade 56747 1 HP Straight-Line Die Grinder, Central Vacuum

• 1.0 hp (744 W) Straight-Line Vacuum Die Grinder for connection to central vacuum systems. Achieve rapid material removal with source capture. Gearless for less maintenance.
• 1.0 hp (744 W) Vacuum Die Grinders are utilized for rapid material removal, precise finishing, polishing, deburring, and removal of parting lines and flash. For use with carbide burrs, rotary files, mounted points, roll cartridges, wheels and discs.
• Model includes urethane Vacuum Shroud for efficient capture of dust, debris, and contaminants such as Hexavalent Chromium. For use on non-ferrous materials, such as fiberglass, carbon fiber and composites.
• Also includes Vacuum Sleeve, which can be easily trimmed to accommodate the length of the accessory. Sleeve can be trimmed horizontally or vertically, and is also removable. All models includes Conductive Hose & Cuffs, to shield operator from electrostatic discharge (ESD). 1-1/4" Dia. Vacuum Hose Port.
• Each model also includes 6 mm Collet Insert.

The Dynabrade 56747 1 HP Straight-Line Die Grinder, Central Vacuum is a Dynabrade tool within the Die Grinder category of tooling range. Spindles of can be used which can also be supplied by DynaShop. A Central tool with a maximum RPM of 20000, a power rating (hp/W) of 1.0 (744) with a weight of 1.27kg.

Parts Manuals for the Dynabrade 56747 1 HP Straight-Line Die Grinder, Central Vacuum

Find the five digit number for your part(s) in the parts manual below, and click the link to open a new tab where you can add it to your basket. Please note that depending on the age of your tool this may not be the correct parts manual - it should however state the range of serial numbers to which it applies at the top left/right of the first page.

Current Manual

Tune-Up Kit

Book a Dynabrade Repair

If you would like to book a repair for the Dynabrade 56747 1 HP Straight-Line Die Grinder, Central Vacuum please use the form below. You will then receive an email - simply place a copy of this email in the box with your tool and send it to the address stated in the email.

Vibration & Sound Readings for the Dynabrade 56747 1 HP Straight-Line Die Grinder, Central Vacuum

Please note – The vibration readings provided for the Dynabrade 56747 1 HP Straight-Line Die Grinder, Central Vacuum are based on laboratory results in very specific sets of conditions. Vibration levels are dependent on a number of factors that include, among many others; the abrasive being used, the job in hand and operator experience. DynaShop or Dynabrade cannot be held responsible for the consequences of using the listed values for risk assessment, rather than real-world values measured in your own specific application.

Vibration Level EN1296 (m/sec²)Uncertainty EN1296 (m/sec²)Vibration Test Method
Under 2.50.9ISO 8662-13

Sound Pressure (dBA)Sound Power (dBA)
8394

Would you like this data in an email?

Simply fill out the form below and the vibration data for the Dynabrade 56747 1 HP Straight-Line Die Grinder, Central Vacuum will be sent to your email automatically.

On-Site Tool Demonstrations of the Dynabrade 56747 1 HP Straight-Line Die Grinder, Central Vacuum

Please complete the form below to arrange a tool demonstration for the Dynabrade 56747 1 HP Straight-Line Die Grinder, Central Vacuum or any of the Dynabrade range of tooling. Alternatively please call us on 01273 468736.

Book a Tool Demonstration

    For our privacy policy please click here.

Video of the Dynabrade 56747 1 HP Straight-Line Die Grinder, Central Vacuum

Additional information

Tool Type

Model Number

56747

Air Inlet Thread

3/8" NPT

Vacuum Type

Max. RPM

Exhaust Type

Configuration

Power HP (W)

Consumable Shape

Item Weight (kgs)

Packaged Weight (kgs)

Other Specifications

, , , , , ,

Vibration Level (m/sec²)

Uncertainty

Vibration Method

Sound Pressure (dBA)

Sound Power (dBA)