01273 468736

DynaShop Owned and Operated by SAIC

ON-SITE TOOL DEMONSTRATIONS
Specialist advice to reduce your process times and improve efficiency, with the aim of saving you time & money.
BOOK SITE VISIT ›
FREE DELIVERY
For Orders £100+
TOOL SERVICING & REPAIRS
Send us your air tools for servicing to get them back up and running as good as new, with free advice on preventative maintenance.
BOOK TOOL REPAIR ›

Dynabrade 52597 7″ (178mm) Dia. Right Angle Disc Sander, Central Vacuum

MRP: £1,216.26

£964.10 +VAT

Go to Parts Manual

Dynabrade 52597 7″ (178mm) Dia. Right Angle Disc Sander, Central Vacuum


FINANCE OPTIONS AVAILABLE

PAY FROM £26.63 PER MONTH

Description

Product Description of Dynabrade 52597 7" (178mm) Dia. Right Angle Disc Sander, Central Vacuum

• 7" Dia., 1.3 hp, Right Angle Disc Sander with unique Vacuum Shroud captures most contaminants. This Central Vacuum Model (52597) runs free at 6,000 RPM and has a 5/8"-11 Male Spindle Thread. 1-1/4" diameter Swivel Cuff (96004) improves maneuverability. Tool includes Vibration Dampening Side Handle (53134) for left or right hand use.
• Vacuum Shroud captures airborne contaminants such as Hexavalent Chromium. An essential tool for nuclear plants, aerospace, wind energy, and marine markets. For use on non-ferrous surfaces such as Carbon Fiber, Composites, Fiberglass, Turbine Blades, more.
• Tool accepts optional 7" (178 mm) diameter Abrasive Discs with 7/8" (22 mm) center hole. Includes 51151 Backing Pad, which is 7" (178 mm) in diameter, and flange w/nut. Lightweight non-marring Vacuum Shroud is constructed of high-quality clear urethane. 3/4" (19 mm) high Shroud Brush (02342) assists in capture of airborne contaminants.
• Includes Conductive Hose & Cuffs, to shield operator from electrostatic discharge (ESD). Shroud has View-Port which allows operator to see abrasive disc and work surface. Quiet, robust 1.3 hp (970 W) air motor is governor-controlled to maintain consistent RPM under load.
• Convenient Spindle Lock allows quick and easy changing of backing pad or abrasive. Wick-Lube System extends gear life with regular lubrication. Gear Oil (95848) & Gear Oil Gun (95541) included with tool, and also sold separately.

Parts Manuals for the Dynabrade 52597 7" (178mm) Dia. Right Angle Disc Sander, Central Vacuum

Find the five digit number for your part(s) in the parts manual below, and click the link to open a new tab where you can add it to your basket. Please note that depending on the age of your tool this may not be the correct parts manual - it should however state the range of serial numbers to which it applies at the top left/right of the first page.

Current Manual

Tune-Up Kit

Book a Dynabrade Repair

If you would like to book a repair for the Dynabrade 52597 7" (178mm) Dia. Right Angle Disc Sander, Central Vacuum please use the form below. You will then receive an email - simply place a copy of this email in the box with your tool and send it to the address stated in the email.

Vibration & Sound Readings for the Dynabrade 52597 7" (178mm) Dia. Right Angle Disc Sander, Central Vacuum

Please note – The vibration readings provided for the Dynabrade 52597 7" (178mm) Dia. Right Angle Disc Sander, Central Vacuum are based on laboratory results in very specific sets of conditions. Vibration levels are dependent on a number of factors that include, among many others; the abrasive being used, the job in hand and operator experience. DynaShop or Dynabrade cannot be held responsible for the consequences of using the listed values for risk assessment, rather than real-world values measured in your own specific application.

Vibration Level EN1296 (m/sec²)Uncertainty EN1296 (m/sec²)Vibration Test Method
Under 2.51.2ISO 8662-8

Sound Pressure (dBA)Sound Power (dBA)
7687

Would you like this data in an email?

Simply fill out the form below and the vibration data for the Dynabrade 52597 7" (178mm) Dia. Right Angle Disc Sander, Central Vacuum will be sent to your email automatically.

On-Site Tool Demonstrations of the Dynabrade 52597 7" (178mm) Dia. Right Angle Disc Sander, Central Vacuum

Please complete the form below to arrange a tool demonstration for the Dynabrade 52597 7" (178mm) Dia. Right Angle Disc Sander, Central Vacuum or any of the Dynabrade range of tooling. Alternatively please call us on 01273 468736.

Book a Tool Demonstration

    For our privacy policy please click here.

Video of the Dynabrade 52597 7" (178mm) Dia. Right Angle Disc Sander, Central Vacuum

Additional information

Tool Type

Model Number

52597

Air Inlet Thread

3/8" NPT

Vacuum Type

Max. RPM

Exhaust Type

Configuration

Power HP (W)

Consumable Shape

Consumable Size

Pad Fixing Type

Item Weight (kgs)

Packaged Weight (kgs)

Other Specifications

, , , , , ,

Vibration Level (m/sec²)

Uncertainty

Vibration Method

Sound Pressure (dBA)

Sound Power (dBA)