Description
Product Description of Dynabrade 40335 Dynafile II Abrasive Belt Tool, for Non-Woven Nylon Belts
• Designed exclusively for use with non-woven nylon belts. Excellent for setting grain lines, achieving consistent satin finishes on metals, removing oxide and weld discoloration.
• 40375 Rubber Drive Wheel minimizes non-woven nylon belt slippage. Straight belt path extends abrasive life.
• Includes 11203 Contact Arm for 1/2" wide x 18" long medium non-woven nylon belt (90292).
Many Dynabrade abrasive belt tools include a swiveling belt guard to make changing belts quick and safe.
Parts Manuals for the Dynabrade 40335 Dynafile II Abrasive Belt Tool, for Non-Woven Nylon Belts
Find the five digit number for your part(s) in the parts manual below, and click the link to open a new tab where you can add it to your basket. Please note that depending on the age of your tool this may not be the correct parts manual - it should however state the range of serial numbers to which it applies at the top left/right of the first page.
Current Manual
Tune-Up Kit
Book a Dynabrade Repair
Vibration & Sound Readings for the Dynabrade 40335 Dynafile II Abrasive Belt Tool, for Non-Woven Nylon Belts
Please note – The vibration readings provided for the Dynabrade 40335 Dynafile II Abrasive Belt Tool, for Non-Woven Nylon Belts are based on laboratory results in very specific sets of conditions. Vibration levels are dependent on a number of factors that include, among many others; the abrasive being used, the job in hand and operator experience. DynaShop or Dynabrade cannot be held responsible for the consequences of using the listed values for risk assessment, rather than real-world values measured in your own specific application.
| Vibration Level EN1296 (m/sec²) | Uncertainty EN1296 (m/sec²) | Vibration Test Method |
| Under 2.5 | 0.1 | S1049 |
| Sound Pressure (dBA) | Sound Power (dBA) |
| 78 | 89 |
Would you like this data in an email?
Simply fill out the form below and the vibration data for the Dynabrade 40335 Dynafile II Abrasive Belt Tool, for Non-Woven Nylon Belts will be sent to your email automatically.
On-Site Tool Demonstrations of the Dynabrade 40335 Dynafile II Abrasive Belt Tool, for Non-Woven Nylon Belts
Please complete the form below to arrange a tool demonstration for the Dynabrade 40335 Dynafile II Abrasive Belt Tool, for Non-Woven Nylon Belts or any of the Dynabrade range of tooling. Alternatively please call us on 01273 468736.
