13x305mm Surface Conditioning Sanding Belts, 50/Pack

Description

Product Description of the 13x305mm Surface Conditioning Sanding Belts, 50/Pack

13x305mm Surface Conditioning Sanding Belts have a non-woven web structure which makes them ideal for conditioning and finishing a surface, and leaving a grained finish where desired. They are recommended for use on all metals.

Resistant to clogging and loading, 13x305mm Surface Conditioning Sanding Belts benefits from these features on soft metals in particular which are prone to clogging up the belt.

This material in particular has a low stretch backing which maintains its form well and so is preferred for file belts which will run over a small contact wheel.

These belts give are purely for achieving a consistent scratch pattern/finish with no stock removal properties.

The 13x305mm Surface Conditioning Sanding Belts, 50/Pack is a Belt with a size of 13x305mm and a vacuum type of Non-Vacuum. The 13x305mm Surface Conditioning Sanding Belts, 50/Pack can be fitted to the category/categories and can be purchased directly from us. If you have any queries with regards to the 13x305mm Surface Conditioning Sanding Belts, 50/Pack please do not hesitate in contacting us on the number above, email or start a web chat.

Dynabrade Tool Manuals

If you need parts we have available all Dynabrade tool manuals (both past and present.) Please search for your parts manual below using the 5 digit model number of your tool, which will then give you a breakdown and diagram of all the parts for that specific model. With these part numbers you can search for the correct parts for your tool and simply place an order for these online.

Dynabrade Parts

When looking for parts online please keep a note of your tool's serial number, as in some cases the model may have been re-designed and therefore have a new manual. You can check whether a manual is suitable for your model by looking at the top left hand corner of the first page, which will generally reference the range of serial numbers to which it applies. If you already know your part number, please enter it in the box below. Add rows to add more parts. [wcbulkorder]

Service & Repair

If you are unsure of how to replace the necessary parts and wish to maximize the value, reliability and safety of your Dynabrade tools, have them repaired by Dynabrade factory experts. Dynabrade operate a service and repair centre in the UK and all work is carried out by qualified Dynabrade engineers, with 98% of all repairs and services completed within 48 hours.

BOOK A REPAIR

Recommended Tools for the 13x305mm Surface Conditioning Sanding Belts, 50/Pack