Description
Product Description of Dynabrade 52596 5" (127mm) Dia. Right Angle Disc Sander, Central Vacuum
• Central Vacuum Model (52596) includes Dynabrade 1.3 hp Disc Sander (52635) with Vacuum Shroud (52744). Tool includes Backing Pad (51150) which has a 5" (127 mm) diameter, plus mounting hardware. Accepts optional 5" (127 mm) diameter Abrasive Discs with 7/8" (22 mm) center hole.
• Tool has robust, governor-controlled 1.3 hp (970 W) air motor. Includes Conductive Hose & Cuffs, to shield operator from electrostatic discharge (ESD). Swivel Cuff (96004) improves maneuverability! Tool housing and handle are made of solid cast aluminum. Insulated throttle handle reduces cold air transmission.
• Vacuum Shroud angle ensures ideal surface contact for maximum debris extraction. 3/4" (19 mm) high Shroud Brush (50582) assists in capture of airborne contaminants. Tool includes Vibration-Dampening Side Handle (53134). Safety-lock throttle lever is standard.
• Ideal for use on non-ferrous surfaces such as fiberglass and composites. A vital tool in the marine industry and AOEM! Flexible, non-marring Vacuum Shroud is constructed of high-quality clear urethane. Vacuum Shroud allows capture of dust, debris and contaminants such as Hexavalent Chromium. Shroud brush assists in capture of airborne contaminants.
• Convenient Spindle Lock allows quick and easy changing of backing pad or abrasive. Wick-Lube System extends gear life with regular lubrication. Gear Oil (95848) & Gear Oil Gun (95541) included with tool, and also sold separately.
Parts Manuals for the Dynabrade 52596 5" (127mm) Dia. Right Angle Disc Sander, Central Vacuum
Find the five digit number for your part(s) in the parts manual below, and click the link to open a new tab where you can add it to your basket. Please note that depending on the age of your tool this may not be the correct parts manual - it should however state the range of serial numbers to which it applies at the top left/right of the first page.
Current Manual
Tune-Up Kit
Book a Dynabrade Repair
Vibration & Sound Readings for the Dynabrade 52596 5" (127mm) Dia. Right Angle Disc Sander, Central Vacuum
Please note – The vibration readings provided for the Dynabrade 52596 5" (127mm) Dia. Right Angle Disc Sander, Central Vacuum are based on laboratory results in very specific sets of conditions. Vibration levels are dependent on a number of factors that include, among many others; the abrasive being used, the job in hand and operator experience. DynaShop or Dynabrade cannot be held responsible for the consequences of using the listed values for risk assessment, rather than real-world values measured in your own specific application.
| Vibration Level EN1296 (m/sec²) | Uncertainty EN1296 (m/sec²) | Vibration Test Method |
| Under 2.5 | 0.7 | ISO 8662-8 |
| Sound Pressure (dBA) | Sound Power (dBA) |
| 81 | 92 |
Would you like this data in an email?
Simply fill out the form below and the vibration data for the Dynabrade 52596 5" (127mm) Dia. Right Angle Disc Sander, Central Vacuum will be sent to your email automatically.
On-Site Tool Demonstrations of the Dynabrade 52596 5" (127mm) Dia. Right Angle Disc Sander, Central Vacuum
Please complete the form below to arrange a tool demonstration for the Dynabrade 52596 5" (127mm) Dia. Right Angle Disc Sander, Central Vacuum or any of the Dynabrade range of tooling. Alternatively please call us on 01273 468736.
