Description
Product Description of Dynabrade 52436 4-1/2" (114mm) Dia. 7 Degree Offset Cut-Off Wheel Tool, Central Vacuum
• Vacuum Cut-Off Wheel Tool, for efficient cutting with dust and debris removal.
• 4-1/2" Diameter, 7 degree Offset, .7 hp, 20,000 RPM, Rear Exhaust.
• Ideal for use with optional 94912 Diamond Cut-Off Wheel (4-1/2" diameter). Diamond Cut-Off Wheels are slotted for cooler running and longer life.
• Adjustable wheel guard has vacuum port (1" outside diameter) that diverts airborne dust and debris to optional vacuum source. Blade depth exposure of 1-3/16".
• Tool includes cushioned, soft-grip side handle. Handle is offset 7 Degree for greater operator comfort and control.
Parts Manuals for the Dynabrade 52436 4-1/2" (114mm) Dia. 7 Degree Offset Cut-Off Wheel Tool, Central Vacuum
Find the five digit number for your part(s) in the parts manual below, and click the link to open a new tab where you can add it to your basket. Please note that depending on the age of your tool this may not be the correct parts manual - it should however state the range of serial numbers to which it applies at the top left/right of the first page.
Current Manual
Tune-Up Kit
Book a Dynabrade Repair
Vibration & Sound Readings for the Dynabrade 52436 4-1/2" (114mm) Dia. 7 Degree Offset Cut-Off Wheel Tool, Central Vacuum
Please note – The vibration readings provided for the Dynabrade 52436 4-1/2" (114mm) Dia. 7 Degree Offset Cut-Off Wheel Tool, Central Vacuum are based on laboratory results in very specific sets of conditions. Vibration levels are dependent on a number of factors that include, among many others; the abrasive being used, the job in hand and operator experience. DynaShop or Dynabrade cannot be held responsible for the consequences of using the listed values for risk assessment, rather than real-world values measured in your own specific application.
| Vibration Level EN1296 (m/sec²) | Uncertainty EN1296 (m/sec²) | Vibration Test Method |
| Under 2.5 | 1 | S1049 |
| Sound Pressure (dBA) | Sound Power (dBA) |
| 78 | 89 |
Would you like this data in an email?
Simply fill out the form below and the vibration data for the Dynabrade 52436 4-1/2" (114mm) Dia. 7 Degree Offset Cut-Off Wheel Tool, Central Vacuum will be sent to your email automatically.
On-Site Tool Demonstrations of the Dynabrade 52436 4-1/2" (114mm) Dia. 7 Degree Offset Cut-Off Wheel Tool, Central Vacuum
Please complete the form below to arrange a tool demonstration for the Dynabrade 52436 4-1/2" (114mm) Dia. 7 Degree Offset Cut-Off Wheel Tool, Central Vacuum or any of the Dynabrade range of tooling. Alternatively please call us on 01273 468736.
