Description
Product Description of Discontinued - Dynabrade 10280 3" x 4-1/4" (76mm x 108mm) Dynabug II Orbital Sander, Non-Vacuum
A small tool that's big on performance. 3/32" (2.5) orbit with 10,000 RPM. Premium urethane hook-face pad included on all models. Replacement and PSA pads available also.
Designed for efficient finishing of composites, fiberglass, painted and metal surfaces. Lightweight and compact. Rectangular pad sands deep into corners where orbitals can't touch.
Includes 3" (76) x 4-1/4" (108) hook-face pad.
The Discontinued - Dynabrade 10280 3" x 4-1/4" (76mm x 108mm) Dynabug II Orbital Sander, Non-Vacuum has a Refined Ergonomic Tool Grip that allows for a more comfortable grip and feel, reducing operator fatigue and increasing efficiency. Perfectly-balanced, weight-mated sanding pad with exclusive single-piece hub design. Dynabrade premium urethane pads offer smoother operating performance and minimal vibration. To read our guide on choosing the correct Dynorbital please click here.
Parts Manuals for the Discontinued - Dynabrade 10280 3" x 4-1/4" (76mm x 108mm) Dynabug II Orbital Sander, Non-Vacuum
Find the five digit number for your part(s) in the parts manual below, and click the link to open a new tab where you can add it to your basket. Please note that depending on the age of your tool this may not be the correct parts manual - it should however state the range of serial numbers to which it applies at the top left/right of the first page.
Current Manual
Past Manual
Tune-Up Kit
Book a Dynabrade Repair
Vibration & Sound Readings for the Discontinued - Dynabrade 10280 3" x 4-1/4" (76mm x 108mm) Dynabug II Orbital Sander, Non-Vacuum
Please note – The vibration readings provided for the Discontinued - Dynabrade 10280 3" x 4-1/4" (76mm x 108mm) Dynabug II Orbital Sander, Non-Vacuum are based on laboratory results in very specific sets of conditions. Vibration levels are dependent on a number of factors that include, among many others; the abrasive being used, the job in hand and operator experience. DynaShop or Dynabrade cannot be held responsible for the consequences of using the listed values for risk assessment, rather than real-world values measured in your own specific application.
| Vibration Level EN1296 (m/sec²) | Uncertainty EN1296 (m/sec²) | Vibration Test Method |
| 2.5 | 0.9 | ISO 8662-8 |
| Sound Pressure (dBA) | Sound Power (dBA) |
| 77 | 88 |
Would you like this data in an email?
Simply fill out the form below and the vibration data for the Discontinued - Dynabrade 10280 3" x 4-1/4" (76mm x 108mm) Dynabug II Orbital Sander, Non-Vacuum will be sent to your email automatically.
On-Site Tool Demonstrations of the Discontinued - Dynabrade 10280 3" x 4-1/4" (76mm x 108mm) Dynabug II Orbital Sander, Non-Vacuum
Please complete the form below to arrange a tool demonstration for the Discontinued - Dynabrade 10280 3" x 4-1/4" (76mm x 108mm) Dynabug II Orbital Sander, Non-Vacuum or any of the Dynabrade range of tooling. Alternatively please call us on 01273 468736.
