Description
Product Description of Dynabrade 53532 Cone or Plug Grinder (Double Extension)
• Includes 3/8"-24 Male Threaded Adapter (53610)
• Extension Grinders allow operator to extend into work pieces and reach lengthy distances.
• Extension length of 8-3/8 allows longer reach than competitive models! Extensions are constructed of steel for maximum durability.
• Designed for minimal vibration. Extensions do not spin during tool use, so continuous tightening is not needed (as with some one-piece shaft-type extensions).
• Tools can also be fitted with optional Buffing Pads, optional collets and inserts, plus optional Cone/Plug Wheels. (Note: Speed of tool must not exceed maximum operating speed of accessory.)
The Dynabrade 53532 Cone or Plug Grinder (Double Extension) is a Dynabrade tool within the Grinder category of tooling range. Spindles of can be used which can also be supplied by DynaShop. A Non-Vacuum tool with a maximum RPM of 18000, a power rating (hp/W) of 1.0 (744) with a weight of 3.13kg.
Parts Manuals for the Dynabrade 53532 Cone or Plug Grinder (Double Extension)
Find the five digit number for your part(s) in the parts manual below, and click the link to open a new tab where you can add it to your basket. Please note that depending on the age of your tool this may not be the correct parts manual - it should however state the range of serial numbers to which it applies at the top left/right of the first page.
Current Manual
Tune-Up Kit
Book a Dynabrade Repair
Vibration & Sound Readings for the Dynabrade 53532 Cone or Plug Grinder (Double Extension)
Please note – The vibration readings provided for the Dynabrade 53532 Cone or Plug Grinder (Double Extension) are based on laboratory results in very specific sets of conditions. Vibration levels are dependent on a number of factors that include, among many others; the abrasive being used, the job in hand and operator experience. DynaShop or Dynabrade cannot be held responsible for the consequences of using the listed values for risk assessment, rather than real-world values measured in your own specific application.
| Vibration Level EN1296 (m/sec²) | Uncertainty EN1296 (m/sec²) | Vibration Test Method |
| Under 2.5 | 0.3 | S1049 |
| Sound Pressure (dBA) | Sound Power (dBA) |
| 79 | 90 |
Would you like this data in an email?
Simply fill out the form below and the vibration data for the Dynabrade 53532 Cone or Plug Grinder (Double Extension) will be sent to your email automatically.
On-Site Tool Demonstrations of the Dynabrade 53532 Cone or Plug Grinder (Double Extension)
Please complete the form below to arrange a tool demonstration for the Dynabrade 53532 Cone or Plug Grinder (Double Extension) or any of the Dynabrade range of tooling. Alternatively please call us on 01273 468736.
