Description
Product Description of Dynabrade 52635 5" (127mm) Dia. Right Angle Disc Sander
• Includes 51150 Backing Pad, 5" (127 mm) diameter, plus mounting hardware. Accepts optional 5" (127 mm) diameter Abrasive Discs with 7/8" (22 mm) center hole.
• Dynabrade's 1.3 hp (970 W) Right Angle Sander offer countless grinding and material removal solutions to industries such as metal/stainless steel fabrication, composites, masonry, ironwork and general welding. Designed to the Dynabrade standard of excellence, these tools offer a wide array of features to increase efficiency and maximize operator comfort!Vibration Dampening Side Handle Specially designed to reduce vibration transfer to operator. Removable for left or right hand use. Rotational Exhaust System Rotates a full 360 degree to ensure that exhaust is directed away from operator.
• Cast Aluminum Construction Tool housing and handle made of solid cast aluminum. Safety-Lock Throttle Lever Prevents accidental start-up of tool. Lever has no sharp edges or pinch-points.
• Wick-Lube System for Longer Gear Life extends gear life with simple lubrication. All models include Gear Oil and Gear Oil Gun. Insulated Throttle Handle Reduces cold air transmission to operator's hand. Handle position is adjustable, increasing comfort and efficiency.
• Robust 1.3 hp Air Motor 1.3 hp (970 W) governor-controlled air motor delivers powerful, efficient performance. Convenient Spindle Lock Allows quick and easy change of grinding wheel or abrasive disc. Less downtime!
Parts Manuals for the Dynabrade 52635 5" (127mm) Dia. Right Angle Disc Sander
Find the five digit number for your part(s) in the parts manual below, and click the link to open a new tab where you can add it to your basket. Please note that depending on the age of your tool this may not be the correct parts manual - it should however state the range of serial numbers to which it applies at the top left/right of the first page.
Current Manual
Past Manual
Tune-Up Kit
Book a Dynabrade Repair
Vibration & Sound Readings for the Dynabrade 52635 5" (127mm) Dia. Right Angle Disc Sander
Please note – The vibration readings provided for the Dynabrade 52635 5" (127mm) Dia. Right Angle Disc Sander are based on laboratory results in very specific sets of conditions. Vibration levels are dependent on a number of factors that include, among many others; the abrasive being used, the job in hand and operator experience. DynaShop or Dynabrade cannot be held responsible for the consequences of using the listed values for risk assessment, rather than real-world values measured in your own specific application.
| Vibration Level EN1296 (m/sec²) | Uncertainty EN1296 (m/sec²) | Vibration Test Method |
| Under 2.5 | 0.7 | ISO 8662-8 |
| Sound Pressure (dBA) | Sound Power (dBA) |
| 78 | 89 |
Would you like this data in an email?
Simply fill out the form below and the vibration data for the Dynabrade 52635 5" (127mm) Dia. Right Angle Disc Sander will be sent to your email automatically.
On-Site Tool Demonstrations of the Dynabrade 52635 5" (127mm) Dia. Right Angle Disc Sander
Please complete the form below to arrange a tool demonstration for the Dynabrade 52635 5" (127mm) Dia. Right Angle Disc Sander or any of the Dynabrade range of tooling. Alternatively please call us on 01273 468736.
