About this category

SEE ALSO:

High Quality Air-Powered Die Grinders – For Use on Metal, Fiberglass, Carbon Fibre, Composites and More!

Dynabrade Vacuum Die Grinders are utilized for rapid material removal, precise finishing, polishing, deburring, and removal of parting lines and flash. For use on non-metallic materials, such as fiberglass and composites.
Each model includes urethane Vacuum Shroud for efficient capture of dust, debris and contaminants such as Hexavalent Chromium. Also includes Vacuum Sleeve, which can be easily trimmed to accommodate the length of the accessory. Sleeve can be trimmed horizontally or vertically, and is also removable.

View Full Description

High Quality Air-Powered Die Grinders – For Use on Metal, Fiberglass, Carbon Fibre, Composites and More!

.4 hp • Connect to Central Vacuum System • Rapid Material Removal with Source Capture

• .4 hp (298 W) Vacuum Die Grinders are utilized for rapid material removal, precise finishing, polishing, deburring, and removal of parting lines and flash.
• For use on non-metallic materials, such as fiberglass and composites.
• Each model includes urethane Vacuum Shroud for efficient capture of dust, debris and contaminants such as Hexavalent Chromium.
• Also includes Vacuum Sleeve, which can be easily trimmed to accommodate the length of the accessory. Sleeve can be trimmed horizontally or vertically, and is also removable.

Right Angle Models

Model 56715 – 12,000 RPM, 1/4″ & 6 mm Collets
Model 56719 – 20,000 RPM, 1/4″ & 6 mm Collets

7° Offset Models

Model 56727 – 5,000 RPM, 1/4″ & 6 mm Collets
• Planetary geared.

Model 56723 – 25,000 RPM, 1/4″ & 6 mm Collets
• Gearless design.

Straight-Line Models

Model 56751 – 5,000 RPM, 1/4″ & 6 mm Collets
• Planetary geared.

Model 56755 – 25,000 RPM, 1/4″ & 6 mm Collets
• Gearless design.

Dynabrade Central Vac Die Grinder Image1
Dynabrade Central Vac Die Grinder Image2
Dynabrade Central Vac Die Grinder Image3

.7 hp & 1 hp • Connect to Central Vacuum System • Rapid Material Removal with Source Capture

• .7 hp (522 W) and 1 hp (744 W) Vacuum Die Grinders are utilized for rapid material removal, precise finishing, polishing, deburring, and removal of parting lines and flash.
• For use on non-metallic materials, such as fiberglass, carbon fiber, and composites.
• Each model includes urethane Vacuum Shroud for efficient capture of dust, debris, and contaminants such as Hexavalent Chromium.
• Also includes Vacuum Sleeve, which can be easily trimmed to accommodate the length of the accessory. Sleeve can be trimmed horizontally or vertically, and is also removable.

Straight-Line Model, .7 hp

Model 56759 – 15,000 RPM, 1/4″ & 6 mm Collets

7° Offset Model, .7 hp

Model 56739 – 18,000 RPM, 1/4″ & 6 mm Collets

Straight-Line Models, 1 hp

Model 56743 – 12,000 RPM, 1/4″ & 6 mm Collets
Model 56747 – 20,000 RPM, 1/4″ & 6 mm Collets

Dynabrade Central Vac Die Grinder Image4
Dynabrade Central Vac Die Grinder Image5
Dynabrade Central Vac Die Grinder Image6

Dynabrade Central Vac Die Grinder Specs Table