Description
Product Description of Dynabrade 56755 .4 HP Straight-Line Die Grinder, Central Vacuum
• Dynabrade .4 hp Vacuum Die Grinders are ideal for rapid material removal, finishing, removing parting-lines & flash.
• For use with carbide burrs, rotary files, mounted points, roll cartridges, wheels and discs. Sold separately.
• Each model includes urethane Vacuum Shroud for efficient capture of dust, debris and contaminants such as Hexavalent Chromium.
• For use on non-ferrous materials, such as fiberglass and composites. Includes 1/4" Collet Insert and 6 mm Collet Insert.
• All models includes Conductive Hose & Cuffs, to shield operator from electrostatic discharge (ESD). Vacuum Sleeve can be trimmed, horizontally or vertically, to accommodate accessory or workpiece! (Also removable.) 1-1/4" Dia. Vacuum Hose Port.
The Dynabrade 56755 .4 HP Straight-Line Die Grinder, Central Vacuum is a Dynabrade tool within the Die Grinder category of tooling range. Spindles of can be used which can also be supplied by DynaShop. A Central tool with a maximum RPM of 25000, a power rating (hp/W) of 0.4 (298) with a weight of 0.64kg.
Parts Manuals for the Dynabrade 56755 .4 HP Straight-Line Die Grinder, Central Vacuum
Find the five digit number for your part(s) in the parts manual below, and click the link to open a new tab where you can add it to your basket. Please note that depending on the age of your tool this may not be the correct parts manual - it should however state the range of serial numbers to which it applies at the top left/right of the first page.
Current Manual
Tune-Up Kit
Book a Dynabrade Repair
Vibration & Sound Readings for the Dynabrade 56755 .4 HP Straight-Line Die Grinder, Central Vacuum
Please note – The vibration readings provided for the Dynabrade 56755 .4 HP Straight-Line Die Grinder, Central Vacuum are based on laboratory results in very specific sets of conditions. Vibration levels are dependent on a number of factors that include, among many others; the abrasive being used, the job in hand and operator experience. DynaShop or Dynabrade cannot be held responsible for the consequences of using the listed values for risk assessment, rather than real-world values measured in your own specific application.
Vibration Level EN1296 (m/sec²) | Uncertainty EN1296 (m/sec²) | Vibration Test Method |
Under 2.5 | 0.8 | ISO 8662-13 |
Sound Pressure (dBA) | Sound Power (dBA) |
80 | 91 |
Would you like this data in an email?
Simply fill out the form below and the vibration data for the Dynabrade 56755 .4 HP Straight-Line Die Grinder, Central Vacuum will be sent to your email automatically.
On-Site Tool Demonstrations of the Dynabrade 56755 .4 HP Straight-Line Die Grinder, Central Vacuum
Please complete the form below to arrange a tool demonstration for the Dynabrade 56755 .4 HP Straight-Line Die Grinder, Central Vacuum or any of the Dynabrade range of tooling. Alternatively please call us on 01273 468736.