Product Description of Dynabrade 56743 1 HP Straight-Line Die Grinder, Central Vacuum
• 1.0 hp (744 W) Straight-Line Vacuum Die Grinder for connection to central vacuum systems. Achieve rapid material removal with source capture. Gearless for less maintenance.
• 1.0 hp (744 W) Vacuum Die Grinders are utilized for rapid material removal, precise finishing, polishing, deburring, and removal of parting lines and flash. For use with carbide burrs, rotary files, mounted points, roll cartridges, wheels and discs.
• Model includes urethane Vacuum Shroud for efficient capture of dust, debris, and contaminants such as Hexavalent Chromium. For use on non-ferrous materials, such as fiberglass, carbon fiber and composites.
• Also includes Vacuum Sleeve, which can be easily trimmed to accommodate the length of the accessory. Sleeve can be trimmed horizontally or vertically, and is also removable. All models includes Conductive Hose & Cuffs, to shield operator from electrostatic discharge (ESD). 1-1/4" Dia. Vacuum Hose Port.
• Each model also includes 6 mm Collet Insert.
The Dynabrade 56743 1 HP Straight-Line Die Grinder, Central Vacuum is a Dynabrade tool within the Die Grinder category of tooling range. Spindles of can be used which can also be supplied by DynaShop. A Central tool with a maximum RPM of 12000, a power rating (hp/W) of 1.0 (744) with a weight of 1.27kg.
Parts Manuals for the Dynabrade 56743 1 HP Straight-Line Die Grinder, Central Vacuum
Find the five digit number for your part(s) in the parts manual below, and click the link to open a new tab where you can add it to your basket. Please note that depending on the age of your tool this may not be the correct parts manual - it should however state the range of serial numbers to which it applies at the top left/right of the first page.
Current Manual
Tune-Up Kit
Book a Dynabrade Repair
Vibration & Sound Readings for the Dynabrade 56743 1 HP Straight-Line Die Grinder, Central Vacuum
Important Notice:
The vibration and sound readings provided for the Dynabrade 56743 1 HP Straight-Line Die Grinder, Central Vacuum are based on laboratory testing carried out under controlled conditions.
Actual levels in use can vary significantly depending on factors such as the abrasive material, application, tool maintenance, and operator technique.
These figures should therefore be used as a guideline only. DynaShop and Dynabrade accept no liability for any decisions or assessments made using the listed data instead of measurements taken under your specific operating conditions.
| Vibration Level EN1296 (m/s²) | Uncertainty EN1296 (m/s²) | Vibration Test Method |
|---|---|---|
| Under 2.5 | 1.2 | ISO 8662-13 |
| Sound Pressure (dBA) | Sound Power (dBA) |
|---|---|
| 77 | 88 |
Would you like this data emailed to you?
Fill out the form below and we’ll send the vibration and sound data for the Dynabrade 56743 1 HP Straight-Line Die Grinder, Central Vacuum directly to your inbox.
On-Site Tool Demonstrations of the Dynabrade 56743 1 HP Straight-Line Die Grinder, Central Vacuum
Please complete the form below to arrange a tool demonstration for the Dynabrade 56743 1 HP Straight-Line Die Grinder, Central Vacuum or any of the Dynabrade range of tooling. Alternatively please call us on 01273 468736.