01273 468736

DynaShop Owned and Operated by SAIC

ON-SITE TOOL DEMONSTRATIONS
Specialist advice to reduce your process times and improve efficiency, with the aim of saving you time & money.
BOOK SITE VISIT ›
FREE DELIVERY
For Orders £100+
TOOL SERVICING & REPAIRS
Send us your air tools for servicing to get them back up and running as good as new, with free advice on preventative maintenance.
BOOK TOOL REPAIR ›

13x305mm Zirconia Sanding Belts, 92/Pack

£40.48£50.60 +VAT

13x305mm Zirconia Sanding Belts, 92/Pack

SKU: 13x305mm Zirconia Sanding Belts, 92/Pack Categories: , ,

Description

Product Description of the 13x305mm Zirconia Sanding Belts, 92/Pack

13x305mm Zirconia Sanding Belts have a zirconia grain, which lasts considerably longer and cuts more quickly than aluminium oxide. This is due to its self-sharpening grain which does not dull as quickly.

Due to the very aggressive and fast-cutting nature of the grain, zirconia is generally only available in the coarse to medium grit range (often no finer than P120), any finer than this and the belt is entirely aluminium oxide.

Zirconia is in some cases supplied with a "topsize" (also known as "top coat", or "supersize layer".) This is a coating which is sprayed on to the grit to act as a coolant when working on heat-sensitive metals such as stainless steel and exotic alloys, and therefore reduce discoloration or burning. It can however also act as a lubricant to help reduce loading (where stock removed from the workpiece builds up on the abrasive and makes it less effective) on softer metals such as aluminium. The presence of a topsize does reduce the aggressiveness of the grain however, and so it is best not to have one if discoloration will not be an issue, for example when working on mild/carbon or structural steel.

13x305mm Zirconia Sanding Belts have a strong X-weight cotton backing, which is easier to cut and slightly more flexible than a heavy/rigid polyester material, and so is most suited to file belts in particular. As it is cotton-backed it does however mean that these belts are only suitable for dry use.

The 13x305mm Zirconia Sanding Belts, 92/Pack is a Belt with a size of 13x305mm and a vacuum type of Non-Vacuum. The 13x305mm Zirconia Sanding Belts, 92/Pack can be fitted to the category/categories and can be purchased directly from us. If you have any queries with regards to the 13x305mm Zirconia Sanding Belts, 92/Pack please do not hesitate in contacting us on the number above, email or start a web chat.

Dynabrade Tool Manuals

If you need parts we have available all Dynabrade tool manuals (both past and present.) Please search for your parts manual below using the 5 digit model number of your tool, which will then give you a breakdown and diagram of all the parts for that specific model. With these part numbers you can search for the correct parts for your tool and simply place an order for these online.

Search
Generic filters
Search in title
Search in content
Search in excerpt

Dynabrade Parts

When looking for parts online please keep a note of your tool's serial number, as in some cases the model may have been re-designed and therefore have a new manual. You can check whether a manual is suitable for your model by looking at the top left hand corner of the first page, which will generally reference the range of serial numbers to which it applies. If you already know your part number, please enter it in the box below. Add rows to add more parts. [wcbulkorder]

Service & Repair

If you are unsure of how to replace the necessary parts and wish to maximize the value, reliability and safety of your Dynabrade tools, have them repaired by Dynabrade factory experts. Dynabrade operate a service and repair centre in the UK and all work is carried out by qualified Dynabrade engineers, with 98% of all repairs and services completed within 48 hours.

BOOK A REPAIR

Recommended Tools for the 13x305mm Zirconia Sanding Belts, 92/Pack

Additional information

Consumable Size

Vacuum Type

Consumable Shape

Abrasive Type

Coated Abrasives