Product Description of Dynabrade 57920 4" W x 4-5/16" L (102mm x 110mm) Dynabug "Model T" Orbital Sander, with Clips
• 3/32" diameter orbital action is ideal for fine finishes. Lightweight only 1 lb! Palm-style, ergonomic design features low profile grip for greater operator comfort and control. Operates 8-9 SCFM at 90 PSIG. Can be run by as little as 3 horsepower compressor.
• Low maintenance; easy to repair. Turbine-style vaneless air motor needs no oil!
• Easy interchangeable sanding pads. Uses reattachable and PSA (adhesive-backed) abrasive sheets and discs; coated and non-woven nylon.
• Includes 57999, 4" X 4-5/16", Vinyl-Face Pad with clips.
The Dynabrade 57920 4" W x 4-5/16" L (102mm x 110mm) Dynabug "Model T" Orbital Sander, with Clips has a Refined Ergonomic Tool Grip that allows for a more comfortable grip and feel, reducing operator fatigue and increasing efficiency. Perfectly-balanced, weight-mated sanding pad with exclusive single-piece hub design. Dynabrade premium urethane pads offer smoother operating performance and minimal vibration. To read our guide on choosing the correct Dynorbital please click here.
Parts Manuals for the Dynabrade 57920 4" W x 4-5/16" L (102mm x 110mm) Dynabug "Model T" Orbital Sander, with Clips
Find the five digit number for your part(s) in the parts manual below, and click the link to open a new tab where you can add it to your basket. Please note that depending on the age of your tool this may not be the correct parts manual - it should however state the range of serial numbers to which it applies at the top left/right of the first page.
Current Manual
Tune-Up Kit
Book a Dynabrade Repair
Vibration & Sound Readings for the Dynabrade 57920 4" W x 4-5/16" L (102mm x 110mm) Dynabug "Model T" Orbital Sander, with Clips
Important Notice:
The vibration and sound readings provided for the Dynabrade 57920 4" W x 4-5/16" L (102mm x 110mm) Dynabug "Model T" Orbital Sander, with Clips are based on laboratory testing carried out under controlled conditions.
Actual levels in use can vary significantly depending on factors such as the abrasive material, application, tool maintenance, and operator technique.
These figures should therefore be used as a guideline only. DynaShop and Dynabrade accept no liability for any decisions or assessments made using the listed data instead of measurements taken under your specific operating conditions.
| Vibration Level EN1296 (m/s²) | Uncertainty EN1296 (m/s²) | Vibration Test Method |
|---|---|---|
| Under 2.5 | 1.3 | ISO 8662-8 |
| Sound Pressure (dBA) | Sound Power (dBA) |
|---|---|
| 70 | 81 |
Would you like this data emailed to you?
Fill out the form below and we’ll send the vibration and sound data for the Dynabrade 57920 4" W x 4-5/16" L (102mm x 110mm) Dynabug "Model T" Orbital Sander, with Clips directly to your inbox.
On-Site Tool Demonstrations of the Dynabrade 57920 4" W x 4-5/16" L (102mm x 110mm) Dynabug "Model T" Orbital Sander, with Clips
Please complete the form below to arrange a tool demonstration for the Dynabrade 57920 4" W x 4-5/16" L (102mm x 110mm) Dynabug "Model T" Orbital Sander, with Clips or any of the Dynabrade range of tooling. Alternatively please call us on 01273 468736.