[email protected] 01273 468736

Shop by category

ON-SITE TOOL DEMONSTRATIONS
Specialist advice to reduce your process times and improve efficiency, with the aim of saving you time & money.
BOOK SITE VISIT ›

FREE DELIVERY
For Orders £100+

TOOL SERVICING & REPAIRS
Send us your air tools for servicing to get them back up and running as good as new, with free advice on preventative maintenance.
BOOK TOOL REPAIR ›

Home » Vibration Information for Dynabrade Tools

Vibration Information for Dynabrade Tools

The table below contains the vibration information for 800 Dynabrade tools. Please scroll at the bottom of the table to view more columns, and you can search using the model number in the box at the top right-hand corner.

Date of Release: November 2015

*Current refers to the testing performed on a three-axis basis, more closely duplicating real-world vibration environments.
**Previous refers to the dominant-axis testing which was Dynabrade’s former standard, now replaced by the three-axis environment.

Model No.	Tool Description	Power (W)	Power (HP)	Flow Rate @ 90 PSI (SCFM)	Flow Rate at @ 90 PSI (L/Min)	Free Speed at @ 90 PSI (RPM)	Current* Vibration Level (m/sec²)	Current* Uncertainty EN12096 (m/sec²)	Current* Vibration Test Method	Previous** Vibration Level (m/sec²)	Previous** Uncertainty EN12096 (m/sec²)	Previous** Vibration Test Method	Sound Pressure (dBA)	Sound Power (dBA)
10174	Dynabug® Sander with 3/32" Orbit (Central Vac-Ready)	179	0.24	16	453	10000	5.2	1	ISO 28927-3	2.5	1.2	ISO 8662-8	81	92
10207	1-1/4" Mini-Orbital Sander,15,000 RPM	298	0.4	21	595	15000	6.1	1.1	ISO 28927-3	Under 2.5	0.9	ISO 8662-8	79	90
10278	Dynabug® ll Orbital Finishing Sander	82	0.11	12	340	8000	13.1	1.8	ISO 28927-3	N/A	N/A	N/A	77	88
10279	Dynabug® ll Orbital Finishing Sander Central Vac	82	0.11	12	340	8000	13.1	1.8	ISO 28927-3	N/A	N/A	N/A	80	91
10280	Dynabug® ll Orbital Finishing Sander	112	0.15	13	368	10000	4.6	1	ISO 28927-3	2.5	0.9	ISO 8662-8	77	88
10282	Dynabug® ll Orbital Finishing Sander Central Vac	112	0.15	13	368	10000	3.8	0.9	ISO 28927-3	N/A	N/A	ISO 8662-8	77	88
10283	Dynabug® ll Orbital Finishing Sander	112	0.15	13	368	10000	5.4	1.1	ISO 28927-3	N/A	N/A	ISO 8662-8	77	88
10285	Dynabug® ll Orbital Finishing Sander Central Vac	112	0.15	13	368	10000	3.3	0.8	ISO 28927-3	Under 2.5	0.8	ISO 8662-8	77	88
10288	Wet “Model T” 5" w/Hook Pad	N/A	N/A	17	481	20000	3.2	0.8	ISO 28927-3	2.9	1.5	ISO 8662-8	76	87
10289	Wet “Model T” 6" w/Hook Pad	N/A	N/A	17	481	20000	3.2	0.8	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	76	87
10341	3-1/2" Wet Dynorbital® Supreme ROS	N/A	N/A	17	481	20000	3.8	1	ISO 28927-3	Under 2.5	0.6	ISO 8662-8	73	84
10343	5" Wet Dynorbital® Supreme ROS	179	0.24	16	453	10000	4.4	0.6	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	74	85
10345	6" Wet Dynorbital® Supreme ROS	179	0.24	16	453	10000	10.5	1.5	ISO 28927-3	2.5	1.3	ISO 8662-8	71	82
10353	5" Dia. 3/32" Orbit Wet Dynorbital® Supreme	179	0.24	16	453	10000	3.5	0.8	ISO 28927-3	2.9	1.4	ISO 8662-8	74	85
10354	6" Dia. 3/32" Orbit Wet Dynorbital® Supreme	179	0.24	16	453	10000	3.6	0.9	ISO 28927-3	2.9	1.4	ISO 8662-8	71	82
10360	1-1/4" Mini-Dynorbital® Sander 5,000 RPM Palm-Style	37	0.05	6	170	6000	4.5	1	ISO 28927-3	4.4	2.2	ISO 8662-8	69	80
10390	3" Buffer 2,400 RPM Palm-Style	186	0.25	18	510	2400	2.5	0.7	ISO 28927-3	Under 2.5	0.9	ISO 8662-8	76	87
10400	Dynaline Sander (Non-Vac)	186	0.25	18	510	2400	4.6	1	ISO 28927-3	Under 2.5	0.7	ISO 8662-8	79	90
10404	Dynaline Sander (Cen Vac-Ready)	186	0.25	18	510	2400	5.2	1	ISO 28927-3	2.6	1.3	ISO 8662-8	80	91
10470	“Model T” Sheet Sander w/57999 Pad	N/A	N/A	5	127	20000	3.1	0.8	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	70	81
10472	“Model T” Sheet Sander w/57998 Pad	N/A	N/A	5	127	20000	3.1	0.8	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	70	81
10475	“Model T” 5" Round w/56249 Pad	N/A	N/A	5	127	20000	3	0.8	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	70	81
10477	“Model T” 5" Round w/56248 Pad	N/A	N/A	5	127	20000	3.2	0.8	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	70	81
10479	“Model T” Sheet Sander w/56244 Pad	N/A	N/A	5	127	20000	3.1	0.8	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	70	81
10481	“Model T” 6" Round Sander w/ 56269 Pad	N/A	N/A	5	127	20000	2.7	0.8	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	70	81
10483	“Model T” 6" Round Sander w/ 56268 Pad	N/A	N/A	5	127	20000	3.2	1.4	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	70	81
10485	“Model T” Sander w/Vinyl Pad Central Vac	N/A	N/A	5	127	20000	4	0.9	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	73	84
10487	“Model T” Sander w/Hook Pad Central Vac	N/A	N/A	5	127	20000	4.4	0.9	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	73	84
10540	11" File Board Sander	224	0.3	18	510	2400	6.5	2.3	ISO 20643	3.8	1.9	S1051	77	88
10710	5" Two-Hand Dynorbital® R.O. Sander 12,000 RPM, 3/16" Dia. Orbit (Non-Vac)	336	0.45	23	651	12000	4.1	0.9	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	82	93
10712	5" Two-Hand Dynorbital® R.O. Sander 12,000 RPM, 3/16" Dia. Orbit (Vac-Ready)	336	0.45	23	651	12000	4.3	0.9	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	84	95
10720	6" Two-Hand Dynorbital® R.O. Sander 12,000 RPM, 3/16" Dia. Orbit (Non-Vac)	336	0.45	23	651	12000	5.5	1.8	ISO 28927-3	3.7	1.9	ISO 8662-8	81	92
10722	6" Two-Hand Dynorbital® R.O, Sander 12,000 RPM, 3/16" Dia. Orbit (Vac-Ready)	336	0.45	23	651	12000	8.9	1.8	ISO 28927-3	3.7	1.9	ISO 8662-8	84	95
10724	6" Two-Hand Dynorbital® R.O. Sander 12,000 RPM, 3/16" Dia. Orbit (Central Vac)	336	0.45	23	651	12000	6.1	1.3	ISO 28927-3	3.7	1.9	ISO 8662-8	84	95
10725	8" Two-Hand Dynorbital® R.O. Sander 10,000 RPM, 3/16" Dia. Orbit (Non-Vac)	336	0.45	23	651	10000	15.5	2.9	ISO 28927-3	5.8	2.3	ISO 8662-8	82	93
10727	8" Two-Hand Dynorbital® R.O. Sander 10,000 RPM, 3/16" Dia. Orbit (Vac-Ready)	336	0.45	23	651	10000	16	2.3	ISO 28927-3	5.8	2.3	ISO 8662-8	85	96
10729	8" Two-Hand Dynorbital® R.O. Sander 10,000 RPM, 3/16" Dia. Orbit (Central Vac)	336	0.45	23	651	10000	9.6	1.5	ISO 28927-3	5.8	2.3	ISO 8662-8	85	96
10730	5" Two-Hand Dynorbital® R.O. Sander 12,000 RPM, 3/8" Dia. Orbit (Non-Vac)	336	0.45	23	651	12000	8.1	1.3	ISO 28927-3	3	1.5	ISO 8662-8	82	93
10731	5" Two-Hand Dynorbital® R.O. Sander 12,000 RPM, 3/8" Dia. Orbit (Vac-Ready)	336	0.45	23	651	12000	9.9	1.5	ISO 28927-3	3	1.5	ISO 8662-8	84	95
10733	6" Two-Hand Dynorbital® R.O. Sander 12,000 RPM, 3/8" Dia. Orbit (Non-Vac)	336	0.45	23	651	12000	10.5	3	ISO 28927-3	3.6	1.8	ISO 8662-8	81	92
10734	6" Two-Hand Dynorbital® R.O. Sander 12,000 RPM, 3/8" Dia. Orbitl (Vac-Ready)	336	0.45	23	651	12000	10.5	4.3	ISO 28927-3	3.6	1.8	ISO 8662-8	84	95
10735	6" Two-Hand Dynorbital® R.O. Sander 12,000 RPM, 3/8" Dia. Orbit (Central Vac)	336	0.45	23	651	12000	10.5	3.7	ISO 28927-3	3.6	1.8	ISO 8662-8	84	95
10745	5" Dynabuffer w/Hanger Bracket (14 mm Orbit)	224	0.3	23	651	10000	7.1	3.2	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	78	89
10746	5" Dynabuffer w/Hanger Bracket	224	0.3	23	651	10000	7.1	3.2	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	78	89
10750	5" Non-Vac DynaLocke® Random Dual Action Sander	336	0.45	23	651	12000	3	0.8	ISO 28927-3	Under 2.5	1.2	ISO 8662-8	82	93
10750	5" Non-Vac DynaLocke® Rotary Dual Action Sander	336	0.45	23	651	12000	Under 2.5	0.7	ISO 28927-3	Under 2.5	1	ISO 8662-8	82	93
10752	5" Self-Generated Vac-Ready DynaLocke® Random Dual Action Sander	336	0.45	23	651	12000	3.3	0.8	ISO 28927-3	Under 2.5	1.2	ISO 8662-8	82	93
10752	5" Self-Generated Vac-Ready DynaLocke® Rotary Dual Action Sander	336	0.45	23	651	12000	Under 2.5	1.1	ISO 28927-3	Under 2.5	1	ISO 8662-8	82	93
10754	6" Non-Vac DynaLocke® Random Dual Action Sander	336	0.45	23	651	12000	3.7	0.9	ISO 28927-3	3.7	1.8	ISO 8662-8	85	96
10754	6" Non-Vac DynaLocke® Rotary Dual Action Sander	336	0.45	23	651	12000	Under 2.5	0.7	ISO 28927-3	2.7	1.3	ISO 8662-8	85	96
10756	6" Self-Generated Vac-Ready DynaLocke® Random Dual Action Sander	336	0.45	23	651	12000	5.8	1.1	ISO 28927-3	3.7	1.9	ISO 8662-8	85	96
10756	6" Self-Generated Vac-Ready DynaLocke® Rotary Dual Action Sander	336	0.45	23	651	12000	Under 2.5	0.7	ISO 28927-3	2.7	1.3	ISO 8662-8	85	96
10760	6" Two-Hand Gear-Driven Sander 900 RPM (Non-Vac )	336	0.45	23	651	900	19	5.4	ISO 28927-3	4.7	2.3	ISO 8662-8	85	96
10761	6" Two-Hand Gear-Driven Sander 900 RPM w/57772 Pad (Central Vac-Ready)	336	0.45	23	651	900	7.6	1.3	ISO 28927-3	4.6	2.3	ISO 8662-8	83	94
10763	8" Two-Hand Gear-Driven Sander 900 RPM (Non-Vac)	336	0.45	23	651	900	15	3.9	ISO 28927-3	5.8	2.3	ISO 8662-8	85	96
10764	8" Two-Hand Gear-Driven Sander 900 RPM (Central Vac-Ready)	336	0.45	23	651	900	12	2.8	ISO 28927-3	5.8	2.3	ISO 8662-8	76	87
10770	3" DynaLocke® 12,000 RPM (Non-Vac) (Rotary)	336	0.45	23	651	12000	3	1.6	ISO 28927-3	Under 2.5	0.3	ISO 8662-8	81	92
10770	3" DynaLocke® 12,000 RPM (Non-Vac) (Random)	336	0.45	23	651	12000	Under 2.5	0.6	ISO 28927-3	Under 2.5	0.6	ISO 8662-8	81	92
10771	3" DynaLocke® 12,000 RPM (Self-Gen Vac-Ready) (Rotary)	336	0.45	23	651	12000	3	1.6	ISO 28927-3	Under 2.5	0.3	ISO 8662-8	89	100
10771	3" DynaLocke® 12,000 RPM (Self-Gen Vac-Ready) (Random)	336	0.45	23	651	12000	Under 2.5	0.6	ISO 28927-3	Under 2.5	0.6	ISO 8662-8	86	97
10780	3-1/2" DynaLocke® 12,000 RPM (Non-Vac) (Rotary)	336	0.45	23	651	12000	7.7	1.8	ISO 28927-3	Under 2.5	0.8	ISO 8662-8	80	91
10780	3-1/2" DynaLocke® 12,000 RPM (Non-Vac) (Random)	336	0.45	23	651	12000	8.2	1.3	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	80	91
10781	3-1/2" DynaLocke® 12,000 RPM (Self-Gen Vac-Ready) (Rotary)	336	0.45	23	651	12000	7.7	1.1	ISO 28927-3	Under 2.5	0.8	ISO 8662-8	88	99
10781	3-1/2" DynaLocke® 12,000 RPM (Self-Gen Vac-Ready) (Random)	336	0.45	23	651	12000	8.2	1.5	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	85	96
10800	Dynafine® Detail Sander	298	0.4	23	651	13000	Under 2.5	0.7	ISO 28927-3	Under 2.5	1.2	ISO 8662-8	77	88
10820	Dynafine® Finger Sander	298	0.4	23	651	15000	7.9	1.5	ISO 28927-3	3.5	1.8	ISO 8662-8	77	88
10832	DynaPen Reciprocating Tool, 3 mm Collet	N/A	N/A	1	28	14,000 SPM	6	1.1	ISO 20643	8	3.2	ISO 8662-12	76	87
10843	DynaPen Reciprocating Tool, 1/8" Collet	N/A	N/A	1	28	14,000 SPM	6	1.1	ISO 20643	8	3.2	ISO 8662-12	76	87
11475	Dynabelter® Abrasive Belt Machine (Standard)	522	0.7	30	850	18000	Under 2.5	0.6	ISO 20643	Under 2.5	1.3	S1049	91	102
11476	Dynabelter® Abrasive Belt Machine (Heavy-Duty)	895	1.2	58	1643	13000	Under 2.5	0.5	ISO 20643	Under 2.5	0.4	S1049	86	97
11477	Dynabelter® Abrasive Belt Machine (Extra Heavy-Duty)	1491	2	66	1878	7200	3.9	0.9	ISO 20643	Under 2.5	1.3	S1056	79	90
11486	Dynabelter® Accu-GrinderAbrasive Belt Machine (Heavy-Duty)	895	1.2	58	1643	13000	Under 2.5	0.6	ISO 20643	7.2	2.9	S1056	86	97
12200	Stockade Reciprocating Filer	298	0.4	28	793	2,400 SPM	AOR	N/A	ISO 20643	Under 2.5	1.3	ISO 8662-12	79	90
12201	Stockade Reciprocating Filer	298	0.4	28	793	2,400 SPM	AOR	N/A	ISO 20643	3.51	1.8	ISO 8662-12	79	90
12204	Stockade Reciprocating Sander	298	0.4	28	793	2,400 SPM	AOR	N/A	ISO 20643	4.05	2	ISO 8662-12	79	90
12205	Stockade Reciprocating Saw	298	0.4	28	793	2,400 SPM	AOR	N/A	ISO 20643	4.05	2	ISO 8662-12	79	90
12250	Dynadie® III Reciprocating Filer	149	0.2	18	510	5000 SPM	AOR	N/A	ISO 20643	7.5	3	ISO 8662-12	85	96
13100	Lightweight Dynastraight® Finishing Tool	298	0.4	29	821	950	6	2.4	ISO 20643	6	2.4	ISO 20643	79	90
13101	Lightweight Dynastraight® Finishing Tool	298	0.4	21	581	3200	AOR	N/A	ISO 20643	Under 2.5	1.3	S1049	78	89
13102	Lightweight Dynastraight® Finishing Tool	298	0.4	26	736	5000	AOR	N/A	ISO 20643	Under 2.5	1.3	S1049	73	84
13200	Dynastraight® Finishing Tool	522	0.7	45	1274	950	Under 2.5	0.7	ISO 20643	Under 2.5	1.3	S1049	80	91
13201	Dynastraight® Finishing Tool	522	0.7	41	1161	3400	Under 2.5	0.8	ISO 20643	Under 2.5	1.3	S1049	80	91
13202	Dynastraight® Finishing Tool	522	0.7	41	1161	3400	Under 2.5	0.8	ISO 20643	Under 2.5	1.3	S1049	80	91
13204	Dynastraight® Finishing Tool	522	0.7	41	1161	3400	Under 2.5	0.8	ISO 20643	Under 2.5	1.3	S1049	80	91
13205	Dynastraight® Finishing Tool	522	0.7	41	1161	3400	Under 2.5	0.8	ISO 20643	Under 2.5	1.3	S1049	80	91
13206	Dynastraight® Finishing Tool	522	0.7	40	1133	4500	6	1.4	ISO 20643	Under 2.5	1.3	S1049	82	93
13207	Dynastraight® Finishing Tool	522	0.7	40	1133	4500	6	3	ISO 20643	Under 2.5	1.3	S1049	82	93
13300	Mini-Dynisher® Finishing Tool	298	0.4	22	623	3200	5.4	2	ISO 20643	N/A	N/A	S1049	80	91
13301	Mini-Dynisher® Finishing Tool	298	0.4	25	708	950	2.7	0.8	ISO 20643	Under 2.5	1.3	S1049	81	92
13400	Dynisher® Finishing Tool	522	0.7	46	1303	3400	3.7	0.8	ISO 20643	Under 2.5	1.3	S1049	85	96
13450	Dynisher® Finishing Tool	746	1	31	867	2800	3.7	1.7	ISO 20643	Under 2.5	1.3	S1049	82	93
13500	Slow-Speed Dynastraight® Finishing Tool	746	1	43	1221	950	2.8	0.8	ISO 20643	Under 2.5	0.2	S1049	79	90
13501	Dynastraight® Finishing Tool	746	1	34	952	1800	4.2	1.1	ISO 20643	Under 2.5	0.1	S1049	73	84
13502	Dynastraight® Finishing Tool	746	1	43	1215	3400	Under 2.5	0.6	ISO 20643	Under 2.5	0.4	S1049	76	87
13503	Dynastraight® Finishing Tool	746	1	43	1215	3400	Under 2.5	0.6	ISO 20643	Under 2.5	0.3	S1049	76	87
13504	Dynastraight® Finishing Tool	746	1	43	1215	3400	Under 2.5	0.7	ISO 20643	Under 2.5	0.2	S1049	76	87
13505	Dynastraight® Finishing Tool	746	1	43	1215	3400	Under 2.5	0.7	ISO 20643	Under 2.5	0.2	S1049	76	87
13506	Dynastraight® Finishing Tool	746	1	43	1215	3400	4.4	1	ISO 20643	Under 2.5	0.2	S1049	76	87
13507	Dynastraight® Finishing Tool	746	1	41	1147	4500	Under 2.5	0.8	ISO 20643	Under 2.5	0.3	S1049	78	89
13508	Dynastraight® Finishing Tool	746	1	41	1147	4500	4.2	0.9	ISO 20643	Under 2.5	0.2	S1049	78	89
13509	Dynastraight® Finishing Tool	746	1	42	1184	6000	8.8	2.1	ISO 20643	Under 2.5	0.7	S1049	82	93
13511	Slow-Speed Extension Dynastraight® Finishing Tool	746	1	34	952	1800	2.8	0.8	ISO 20643	Under 2.5	0.1	S1049	73	84
13512	Extension Dynastraight® Finishing Tool	746	1	41	1167	1800	3.3	1.4	ISO 20643	Under 2.5	0.1	S1049	73	84
13515	Extension Dynastraight® Finishing Tool	746	1	41	1167	1800	3.3	1.4	ISO 20643	Under 2.5	0.1	S1049	76	87
13516	Extension Dynastraight® Finishing Tool	746	1	41	1167	1800	3.3	1.4	ISO 20643	Under 2.5	0.1	S1049	76	87
13517	Extension Dynastraight® Finishing Tool	746	1	42	1195	4500	2.5	0.5	ISO 20643	Under 2.5	0.1	S1049	78	89
13518	Extension Dynastraight® Finishing Tool	746	1	42	1195	4500	7.9	1.4	ISO 20643	Under 2.5	0.1	S1049	78	89
13521	Dynastraight® Finishing Tool	746	1	34	952	1800	4.2	1.1	ISO 20643	Under 2.5	1.3	S1049	73	84
13531	Slow-Speed Extension Dynastraight® Finishing Tool	746	1	34	952	1800	2.8	0.8	ISO 20643	Under 2.5	0.1	S1049	73	84
14000	Dynafile® Abrasive Belt Machine	373	0.5	26	731	20000	Under 2.5	1.4	ISO 20643	Under 2.5	1.3	S1049	77	88
14200	Dynangle® Abrasive Belt Machine	373	0.5	26	731	20000	Under 2.5	1.5	ISO 20643	Under 2.5	1.3	S1056	90	101
14300	Dynangle® II (Single Motor)	373	0.5	26	731	20000	Under 2.5	0.6	ISO 20643	3.8	1.9	S1056	80	91
14303	Dynangle® II (Dual Motor with Platen)	373	0.5	26	731	20000	Under 2.5	0.6	ISO 20643	2.7	1.4	S1049	79	90
14306	Dynangle® II (Dual Motor with Platen)	373	0.5	26	731	20000	Under 2.5	0.6	ISO 20643	2.7	1.4	S1049	79	90
14309	3,400 RPM Dynangle® II - Dual Motor	373	0.5	26	731	20000	Under 2.5	0.6	ISO 20643	Under 2.5	1.3	S1049	87	98
14360	Pipe Belt Finisher, .7 hp, 3,400 RPM, 2,100 SFPM	522	0.7	40	1133	3400	Under 2.5	0.6	ISO 20643	N/A	N/A	N/A	82	93
15002	Vacuum Mini-Dynafile® ll, .4 hp, 25,000 RPM,	298	0.4	21	595	25000	Under 2.5	0.6	ISO 20643	N/A	N/A	N/A	83	94
15003	Mini-Dynafile® II Abrasive Belt Machine	298	0.4	20	566	25000	Under 2.5	0.6	ISO 20643	Under 2.5	0.2	S1049	81	92
15013	.4 hp Mini-Dynafile® II	298	0.4	21	595	25000	Under 2.5	0.6	ISO 20643	N/A	N/A	N/A	83	94
15300	Dynafile® III Abrasive Belt Machine	522	0.7	37	1048	20000	Under 2.5	0.6	ISO 20643	Under 2.5	0.3	S1049	87	98
15400	Dynafile® III Abrasive Belt Machine w/11206 Contact Arm	522	0.7	37	1048	20000	Under 2.5	0.6	ISO 20643	Under 2.5	0.6	ISO 20643	84	95
15401	Dynafile® III Abrasive Belt Machine w/11287 Contact Arm	522	0.7	37	1048	20000	Under 2.5	0.6	ISO 20643	Under 2.5	1.3	S1049	82	93
18000	.2 hp Die Grinder	149	0.2	20	552	25000	Under 2.5	0.7	ISO 28927-12	N/A	N/A	N/A	79	90
18001	.2 hp Die Grinder	149	0.2	20	552	25000	Under 2.5	0.7	ISO 28927-12	N/A	N/A	N/A	79	90
18010	.2 hp Right Angle Die Grinder	149	0.2	20	552	20000	5.8	1.8	ISO 28927-12	N/A	N/A	N/A	78	89
18011	.2 hp Right Angle Die Grinder	149	0.2	20	552	20000	5.8	1.8	ISO 28927-12	N/A	N/A	N/A	78	89
18068	3" 2500 RPM Automotive Pistol Grip Buffer.	134	0.18	23	651	2500	Under 2.5	1.3	ISO 28927-3	N/A	N/A	N/A	84	95
18069	4" 2500 RPM Automotive Pistol Grip Eraser Wheel	134	0.18	23	651	2500	Under 2.5	1.3	ISO 28927-3	N/A	N/A	N/A	84	95
18072	4" 2500 RPM Automotive Pistol Grip Eraser Wheel	134	0.18	23	651	2500	Under 2.5	1.3	ISO 28927-3	N/A	N/A	N/A	84	95
18100	Auto File II Abrasive Belt Tool	373	0.5	22	623	20000	Under 2.5	0.6	ISO 20643	Under 2.5	0.6	ISO 20643	81	92
21000	3" Dynorbital-Spirit® ROS (Non-Vac)	186	0.25	14	396	12000	5.4	1	ISO 28927-3	Under 2.5	0.8	ISO 8662-8	70	81
21001	3" Dynorbital-Spirit® ROS (Basic Vac)	186	0.25	14	396	12000	6.1	2.8	ISO 28927-3	Under 2.5	0.8	ISO 8662-8	76	87
21004	3" Dynorbital-Spirit® ROS (Central Vac-Ready)	186	0.25	14	396	12000	6.8	1.2	ISO 28927-3	Under 2.5	0.8	ISO 8662-8	75	86
21005	3-1/2"Dynorbital-Spirit® ROS (Non-Vac)	186	0.25	14	396	12000	15.5	2	ISO 28927-3	Under 2.5	0.7	ISO 8662-8	71	82
21006	3-1/2"Dynorbital-Spirit® ROS (Basic Vac)	186	0.25	14	396	12000	10.5	1.5	ISO 28927-3	Under 2.5	1	ISO 8662-8	77	88
21009	3-1/2"Dynorbital-Spirit® ROS (Central Vac-Ready)	186	0.25	14	396	12000	12.5	1.7	ISO 28927-3	Under 2.5	1	ISO 8662-8	77	88
21010	5" Dynorbital-Spirit® ROS (Non-Vac)	186	0.25	14	396	12000	12.5	1.7	ISO 28927-3	Under 2.5	1.2	ISO 8662-8	73	84
21011	5" Dynorbital-Spirit® ROS (Basic Vac)	186	0.25	14	396	12000	13.5	1.8	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	76	87
21014	5" Dynorbital-Spirit® ROS (Central Vac-Ready)	186	0.25	14	396	12000	13.5	3.1	ISO 28927-3	Under 2.5	1	ISO 8662-8	77	88
21015	6" Dynorbital-Spirit® ROS (Non-Vac)	186	0.25	14	396	12000	14	5.1	ISO 28927-3	Under 2.5	1	ISO 8662-8	74	85
21016	6" Dynorbital-Spirit® ROS (Basic Vac)	186	0.25	14	396	12000	13.5	1.9	ISO 28927-3	Under 2.5	0.8	ISO 8662-8	79	90
21019	6" Dynorbital-Spirit® ROS (Central Vac-Ready)	186	0.25	14	396	12000	11.5	3.4	ISO 28927-3	Under 2.5	1	ISO 8662-8	79	90
21020	3" Dynorbital-Spirit® ROS (Non-Vac)	186	0.25	14	396	12000	2.5	0.8	ISO 28927-3	Under 2.5	0.9	ISO 8662-8	72	83
21021	3" Dynorbital-Spirit® ROS (Basic Vac)	186	0.25	14	396	12000	2.5	0.8	ISO 28927-3	Under 2.5	1	ISO 8662-8	76	87
21024	3" Dynorbital-Spirit® ROS (Central Vac-Ready)	186	0.25	14	396	12000	2.5	0.7	ISO 28927-3	Under 2.5	1	ISO 8662-8	77	88
21025	3-1/2" Dynorbital-Spirit® ROS (Non-Vac)	186	0.25	14	396	12000	5.1	1	ISO 28927-3	Under 2.5	0.7	ISO 8662-8	72	83
21026	3-1/2" Dynorbital-Spirit® ROS (Basic Vac)	186	0.25	14	396	12000	4	1.9	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	78	89
21029	3-1/2" Dynorbital-Spirit® ROS (Central Vac-Ready)	186	0.25	14	396	12000	3.9	0.9	ISO 8662-8	Under 2.5	1.2	ISO 8662-8	76	87
21030	5" Dynorbital-Spirit® ROS (Non-Vac)	186	0.25	14	396	12000	3.9	0.9	ISO 28927-3	Under 2.5	0.6	ISO 8662-8	72	83
21031	5" Dynorbital-Spirit® ROS (Basic Vac)	186	0.25	14	396	12000	4.6	1.4	ISO 28927-3	Under 2.5	0.5	ISO 8662-8	76	87
21034	5" Dynorbital-Spirit® ROS (Central Vac-Ready)	186	0.25	14	396	12000	2.9	0.8	ISO 28927-3	Under 2.5	1.2	ISO 8662-8	75	86
21035	6" Dynorbital-Spirit® ROS (Non-Vac)	186	0.25	14	396	12000	4.5	1.7	ISO 28927-3	Under 2.5	1	ISO 8662-8	73	84
21036	6" Dynorbital-Spirit® ROS (Basic Vac)	186	0.25	14	396	12000	4.4	1	ISO 28927-3	Under 2.5	0.8	ISO 8662-8	77	88
21039	6" Dynorbital-Spirit® ROS (Central Vac-Ready)	186	0.25	14	396	12000	5.1	1.7	ISO 28927-3	Under 2.5	1	ISO 8662-8	77	88
21040	3" Dynorbital-Spirit® ROS (Non-Vac)	186	0.25	14	396	12000	2.9	0.8	ISO 28927-3	Under 2.5	0.5	ISO 8662-8	70	81
21041	3" Dynorbital-Spirit® ROS (Basic Vac)	186	0.25	14	396	12000	3.9	1.2	ISO 28927-3	Under 2.5	0.6	ISO 8662-8	77	88
21044	3" Dynorbital-Spirit® ROS (Central Vac-Ready)	186	0.25	14	396	12000	3.1	0.8	ISO 28927-3	Under 2.5	0.5	ISO 8662-8	76	87
21045	3-1/2"Dynorbital-Spirit® ROS (Non-Vac)	186	0.25	14	396	12000	2.9	1.5	ISO 28927-3	Under 2.5	0.8	ISO 8662-8	70	81
21046	3-1/2"Dynorbital-Spirit® ROS (Basic Vac)	186	0.25	14	396	12000	Under 2.5	1.1	ISO 28927-3	Under 2.5	0.7	ISO 8662-8	76	87
21049	3-1/2"Dynorbital-Spirit® ROS (Central Vac-Ready)	186	0.25	14	396	12000	2.9	0.8	ISO 28927-3	Under 2.5	0.8	ISO 8662-8	76	87
21050	5" Dynorbital-Spirit® ROS (Non-Vac)	186	0.25	14	396	12000	4	0.9	ISO 28927-3	Under 2.5	0.8	ISO 8662-8	74	85
21051	5" Dynorbital-Spirit® ROS (Basic Vac)	186	0.25	14	396	12000	4.8	1	ISO 28927-3	Under 2.5	1	ISO 8662-8	75	86
21054	5" Dynorbital-Spirit® ROS (Central Vac-Ready)	186	0.25	14	396	12000	5	1	ISO 28927-3	Under 2.5	0.9	ISO 8662-8	76	87
21055	6" Dynorbital-Spirit® ROS (Non-Vac)	186	0.25	14	396	12000	6.5	1.1	ISO 28927-3	Under 2.5	0.7	ISO 8662-8	70	81
21056	6" Dynorbital-Spirit® ROS (Basic Vac)	186	0.25	14	396	12000	5.8	2.4	ISO 28927-3	Under 2.5	0.6	ISO 8662-8	77	88
21059	6" Dynorbital-Spirit® ROS (Central Vac-Ready)	186	0.25	14	396	12000	6.3	2.6	ISO 28927-3	Under 2.5	0.7	ISO 8662-8	74	85
21060	6" Dynorbital-Spirit® ROS w/54327 Pad (Non-Vac)	186	0.25	14	396	12000	21.2	3.3	ISO 28927-3	Under 2.5	2.6	ISO 8662-8	74	85
21061	6" Dynorbital-Spirit® ROS w/54327 Pad (Non-Vac)	186	0.25	14	396	12000	9	3.2	ISO 28927-3	Under 2.5	0.9	ISO 8662-8	73	84
21062	6" Dynorbital-Spirit® ROS w/54327 Pad (Non-Vac)	186	0.25	14	396	12000	4.6	1	ISO 28927-3	Under 2.5	0.7	ISO 8662-8	70	81
21063	6" Dynorbital-Spirit® ROS w/54328 Pad (Central Vac-Ready)	186	0.25	14	396	12000	4.1	0.9	ISO 28927-3	3.5	1.8	ISO 8662-8	79	90
21064	6" Dynorbital-Spirit® ROS w/54328 Pad (Central Vac-Ready)	186	0.25	14	396	12000	3.7	0.9	ISO 28927-3	Under 2.5	0.8	ISO 8662-8	77	88
21065	6" Dynorbital-Spirit® ROS w/54328 Pad (Central Vac-Ready)	186	0.25	14	396	12000	7.8	1.3	ISO 28927-3	Under 2.5	0.8	ISO 8662-8	74	85
40320	Dynafile® II Abrasive Belt Machine	373	0.5	28	793	20000	Under 2.5	0.6	ISO 20643	Under 2.5	0.6	S1049	78	89
40326	Dynafile® II Abrasive Belt Machine For 20-1/2" Belts	373	0.5	28	793	20000	Under 2.5	0.6	ISO 20643	Under 2.5	0.2	S1049	81	92
40330	Dynafile® II Abrasive Belt Machine (Vacuum)	373	0.5	28	793	20000	Under 2.5	1	ISO 20643	Under 2.5	0.3	S1056	84	95
40335	NWN Dynafile® II Abrasive Belt Machine	373	0.5	28	793	20000	Under 2.5	0.6	ISO 20643	Under 2.5	0.1	S1049	78	89
40352	Dynafile® II Abrasive Belt Machine	298	0.4	22	623	25000	Under 2.5	0.6	ISO 20643	Under 2.5	0.1	S1049	76	87
40353	NWN Dynafile® II Abrasive Belt Machine	298	0.4	22	623	25000	Under 2.5	0.7	ISO 20643	Under 2.5	0.1	S1049	80	91
40381	Slow-Speed Dynafile® II Abrasive Belt Machine	298	0.4	26	736	5000	Under 2.5	0.6	ISO 20643	Under 2.5	0.3	S1049	74	85
43500	3" Extension Die Grinder, .4 hp, Front Exhaust	298	0.4	19	538	25000	Under 2.5	0.8	ISO 28927-12	N/A	N/A	N/A	77	88
43505	3" Extension Die Grinder, .4 hp, Rear Exhaust	298	0.4	19	538	25000	Under 2.5	1.1	ISO 28927-12	N/A	N/A	N/A	72	83
43510	6" Extension Die Grinder, .4 hp, Front Exhaust	298	0.4	19	538	25000	Under 2.5	0.7	ISO 28927-12	N/A	N/A	N/A	77	88
43515	6" Extension Die Grinder, .4 hp, Rear Exhaust	298	0.4	19	538	25000	Under 2.5	1.7	ISO 28927-12	N/A	N/A	N/A	71	82
46000	Die Grinder .4 hp 12,000 RPM 1/4" & 6 mm Collet	298	0.4	23	651	12000	5	1	ISO 28927-12	N/A	N/A	ISO 8662-13	78	89
46001	Die Grinder .4 hp 15,000 RPM 1/4" & 6 mm Collet	298	0.4	23	651	15000	5	1.2	ISO 28927-12	N/A	N/A	ISO 8662-13	75	86
46002	Die Grinder .4 hp 20,000 RPM 1/4" & 6 mm Collet	298	0.4	23	651	20000	4.3	1.3	ISO 28927-12	N/A	N/A	ISO 8662-13	78	89
47200	.4 hp 950 RPM Straight Die Grinder Rear Exhaust ¼" and 6 mm Collets	298	0.4	26	736	950	2.9	0.8	ISO 28927-12	Under 2.5	0.3	ISO 8662-13	76	87
47201	.4 hp 3,200 RPM Straight Die Grinder Rear Exhaust ¼" and 6 mm Collets	298	0.4	26	736	3200	Under 2.5	0.7	ISO 28927-12	2.5	1.2	ISO 8662-13	75	86
47202	.4 hp 5,500 RPM Straight Die Grinder Rear Exhaust ¼" and 6 mm Collets	298	0.4	26	736	5500	2.9	1	ISO 28927-12	3.5	1.7	ISO 8662-13	80	91
47211	Die Grinder .4 hp 3,200 RPM 1/4" & 6 mm Collet	298	0.4	23	651	3200	Under 2.5	1.2	ISO 28927-12	N/A	N/A	ISO 8662-13	73	84
47212	Die Grinder .4 hp 5000 RPM 1/4" & 6 mm Collet	298	0.4	23	651	5000	Under 2.5	0.8	ISO 28927-12	N/A	N/A	ISO 8662-13	75	86
47800	Die Grinder .4 hp 12,000 RPM 1/4" & 6 mm Collet	298	0.4	25	708	12000	3.7	2	ISO 28927-12	N/A	N/A	ISO 8662-13	84	95
47801	Die Grinder .4 hp 15,000 RPM 1/4" & 6 mm Collet	298	0.4	25	708	15000	3.2	0.8	ISO 28927-12	N/A	N/A	ISO 8662-13	86	97
47802	Die Grinder .4 hp 20,000 RPM 1/4" & 6 mm Collet	298	0.4	25	708	20000	4.6	1.5	ISO 28927-12	N/A	N/A	ISO 8662-13	85	96
47820	Rotary Sander 12,000 2" (51 mm)	298	0.4	25	708	12000	3.6	1.7	ISO 28927-12	N/A	N/A	ISO 8662-8	85	96
47821	Rotary Sander 15,000 2" (51 mm)	298	0.4	25	708	15000	4.5	0.9	ISO 28927-12	N/A	N/A	ISO 8662-8	85	96
47822	Rotary Sander 20,000 2" (51 mm)	298	0.4	25	708	20000	2.8	0.8	ISO 28927-12	N/A	N/A	ISO 8662-8	84	95
47915	Dynafine Dynascraper, .4 hp, 15,000 RPM, Rear Exhaust	298	0.4	15	425	15000	Under 2.5	0.7	ISO 28927-8	N/A	N/A	N/A	71	82
48201	.4 hp 25,000 RPM Straight Die Grinder Rear Exhaust ¼" and 6 mm Collets	298	0.4	26	736	25000	Under 2.5	0.9	ISO 28927-12	Under 2.5	1.2	ISO 8662-13	74	85
48203	.4 hp 30,000 RPM Straight Die Grinder Rear Exhaust ¼" and 6 mm Collets	298	0.4	26	736	30000	Under 2.5	1.1	ISO 28927-12	3.2	1.6	ISO 8662-13	79	90
48205	Die Grinder .4 hp 25,000 RPM 1/4" & 6 mm Collet	298	0.4	23	651	25000	4.6	1.7	ISO 28927-12	N/A	N/A	ISO 8662-13	71	82
48207	Die Grinder .4 hp 30,000 RPM 1/4" & 6 mm Collet	298	0.4	23	651	30000	Under 2.5	0.7	ISO 28927-12	N/A	N/A	ISO 8662-13	72	83
48315	Die Grinder .4 hp 12,000 RPM 1/4" & 6 mm Collet	298	0.4	23	651	12000	3.3	0.8	ISO 28927-12	N/A	N/A	ISO 8662-13	81	92
48316	Die Grinder .4 hp 15,000 RPM 1/4" & 6 mm Collet	298	0.4	23	651	15000	2.8	0.8	ISO 28927-12	N/A	N/A	ISO 8662-13	79	90
48317	Die Grinder .4 hp 20,000 RPM 1/4" & 6 mm Collet	298	0.4	23	651	20000	4.8	1	ISO 28927-12	N/A	N/A	ISO 8662-13	83	94
48325	.4 hp 25,000 RPM Straight Die Grinder Rear Exhaust ¼" and 6 mm Collets	298	0.4	26	736	5000	Under 2.5	0.6	ISO 28927-12	Under 2.5	1	ISO 8662-13	79	90
48327	.4 hp 30,000 RPM Straight Die Grinder Rear Exhaust ¼" and 6 mm Collets	298	0.4	26	736	5000	2.6	1.2	ISO 28927-12	Under 2.5	1.2	ISO 8662-13	76	87
48335	Die Grinder .4 hp 25,000 RPM 1/4" & 6 mm Collet	298	0.4	23	651	25000	3.6	0.9	ISO 28927-12	N/A	N/A	ISO 8662-13	73	84
48337	Die Grinder .4 hp 30,000 RPM 1/4" & 6 mm Collet	298	0.4	23	651	30000	3.3	0.8	ISO 28927-12	N/A	N/A	ISO 8662-13	74	85
48341	.4 hp 30,000 RPM Straight Die Grinder Rear Exhaust ¼" and 6 mm Collets	298	0.4	26	736	30000	Under 2.5	0.6	ISO 28927-12	<25	1.2	ISO 8662-13	78	89
48345	.4 hp 30,000 RPM Straight Die Grinder Rear Exhaust ¼" and 6 mm Collets	298	0.4	26	736	30000	Under 2.5	1.7	ISO 28927-12	Under 2.5	1.6	ISO 8662-13	82	93
48350	.4 hp 35,000 RPM Straight Die Grinder Rear Exhaust ¼" and 6 mm Collets	298	0.4	26	736	35000	3.6	1.4	ISO 28927-12	Under 2.5	1.1	ISO 8662-13	79	90
48355	.4 hp 35,000 RPM Straight Die Grinder Rear Exhaust ¼" and 6 mm Collets	298	0.4	26	736	35000	3.2	1.1	ISO 28927-12	Under 2.5	1.1	ISO 8662-13	76	87
48360	.4 hp 20,000 RPM Straight Die Grinder Rear Exhaust ¼" and 6 mm Collets	298	0.4	26	736	20000	Under 2.5	0.6	ISO 28927-12	3	1.5	ISO 8662-13	76	87
48500	Rotary Sander 25,000 2" (51 mm)	298	0.4	25	708	25000	Under 2.5	0.8	ISO 28927-12	N/A	N/A	ISO 8662-8	73	84
48503	Rotary Sander 25,000 2" (51 mm)	298	0.4	25	708	25000	3	1.3	ISO 28927-12	N/A	N/A	ISO 8662-8	73	84
48520	Rotary Sander 12,000 2" (76 mm)	298	0.4	25	708	12000	4.6	1	ISO 28927-3	N/A	N/A	ISO 8662-8	76	87
48521	Rotary Sander 15,000 2" (76 mm)	298	0.4	25	708	15000	2.8	0.8	ISO 28927-3	N/A	N/A	ISO 8662-8	79	90
48522	Rotary Sander 20,000 2" (51 mm)	298	0.4	25	708	20000	4.8	2.9	ISO 28927-3	N/A	N/A	ISO 8662-8	78	89
48530	Rotary Sander 12,000 3" (76 mm)	298	0.4	25	708	12000	2.7	1.9	ISO 28927-3	N/A	N/A	ISO 8662-8	78	89
48531	Rotary Sander 15,000 3" (76 mm)	298	0.4	25	708	15000	3.4	1.9	ISO 28927-3	N/A	N/A	ISO 8662-8	78	89
48532	Rotary Sander 20,000 3" (76 mm)	298	0.4	25	708	20000	3	0.8	ISO 28927-3	N/A	N/A	ISO 8662-8	78	89
48540	Rotary Sander 12,000 3" (76 mm)	298	0.4	25	708	12000	3.8	0.9	ISO 28927-3	N/A	N/A	ISO 8662-8	81	92
48541	Rotary Sander 15,000 3" (76 mm)	298	0.4	25	708	15000	4.2	1.5	ISO 28927-3	N/A	N/A	ISO 8662-8	83	94
48542	Rotary Sander 20,000 2" (51 mm)	298	0.4	25	708	20000	4.5	2.1	ISO 28927-3	N/A	N/A	ISO 8662-8	81	92
49400	Mini-Angle Head Dynorbital® Sander 3,200 RPM	298	0.4	26	736	3200	4.7	3.1	ISO 28927-3	N/A	N/A	ISO 8662-8	77	88
49401	Mini-Angle Head Dynorbital® Sander 3,200 RPM	298	0.4	26	736	3200	6.7	2.9	ISO 28927-3	N/A	N/A	ISO 8662-8	77	88
49410	Mini-Angle Head 2" (51 mm) Rotary Sander 3,200 RPM	298	0.4	26	736	3200	Under 2.5	0.9	ISO 28927-3	N/A	N/A	ISO 8662-8	78	89
49420	Mini-Angle Head 1/4" Collet Die Grinder	298	0.4	26	736	3200	Under 2.5	0.7	ISO 28927-3	N/A	N/A	ISO 8662-13	80	91
49425	Die Grinder .4 hp 3,200 RPM 1/4" & 6 mm Collet	298	0.4	23	651	3200	Under 2.5	0.7	ISO 28927-12	N/A	N/A	ISO 8662-13	81	92
49430	Mini-Angle Head Drill 3,200 RPM	298	0.4	26	736	3200	Under 2.5	1.1	ISO 28927-3	N/A	N/A	ISO 8662-5	79	90
49445	3" .4 hp 3,200 RPM Buffing Tool	298	0.4	26	725	3200	4.9	1.8	ISO 28927-3	N/A	N/A	N/A	83	94
49455	Mini-Angle Head Drill 950 RPM	298	0.4	26	736	950	4.6	1.2	ISO 28927-3	N/A	N/A	ISO 8662-5	77	88
50210	3" Disc Sander (Self-Generated Vac-Ready)	298	0.4	22	623	15000	Under 2.5	0.8	ISO 28927-3	Under 2.5	0.4	ISO 8662-8	87	98
50211	3" Disc Sander (Central Vac-Ready)	298	0.4	22	623	15000	Under 2.5	0.8	ISO 28927-3	Under 2.5	0.4	ISO 8662-8	81	92
50302	4-1/2"-5" Right Angle Depressed Center Wheel Grinder	298	0.4	22	623	12000	12.5	4.2	ISO 28727-3	7.7	3.1	ISO 8662-4	76	87
50303	4-1/2"-5" Depressed Center Wheel Grinder	298	0.4	22	623	15000	7.8	2.6	ISO 28927-3	Under 2.5	0.3	S1056	77	88
50304	4-1/2"-5" Disc Sander	298	0.4	22	623	15000	Under 2.5	0.6	ISO 28927-3	Under 2.5	0.3	S1056	72	83
50307	4-1/2"-5" Disc Sander	298	0.4	22	623	15000	Under 2.5	0.7	ISO 28927-3	Under 2.5	0.4	S1049	75	86
50320	4-1/2"-5" Disc Sander	522	0.7	32	906	8000	Under 2.5	0.6	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	68	79
50321	4-1/2"-5" Disc Sander	522	0.7	32	906	11000	Under 2.5	0.6	ISO 28927-3	Under 2.5	1	ISO 8662-8	71	82
50324	4" Disc Sander .7 hp 11,000 RPM	522	0.7	32	906	11000	Under 2.5	0.6	ISO 28927-3	Under 2.5	0.5	ISO 8662-8	71	82
50340	4-1/2"-5" Depressed Center Wheel Grinder	522	0.7	32	906	11000	3.7	1.2	ISO 28727-3	3.2	1.6	S1056	71	82
50348	7" Depressed Center Wheel Grinder	298	1.2	22	623	6000	4.1	1.4	ISO 28727-3	3	1.5	S1056	85	96
50350	7" Depressed Center Wheel Grinder	298	1.2	22	623	6000	4.1	1.4	ISO 28727-3	2.6	1.3	S1056	83	94
50561	3" Disc Sander (Central Vac-Ready)	298	0.4	22	623	15000	Under 2.5	0.8	ISO 28927-3	Under 2.5	0.5	ISO 8662-8	81	92
50570	3" Disc Sander (Self-Generated Vac-Ready)	298	0.4	22	623	15000	3.5	1.5	ISO 28927-3	Under 2.5	0.4	ISO 8662-8	87	98
51130	Dynastraight® Flapper	373	0.5	24	680	18000	6.4	1.5	ISO 20643	Under 2.5	1.3	S1049	79	90
51134	Dynastraight® Extension Flapper 8" long	373	0.5	24	680	18000	5.8	2.8	ISO 20643	5.8	2.3	S1049	79	90
51225	2" Self-Generated Vac-Ready Disc Sander 12,000 RPM	298	0.4	21	595	12000	AOR	N/A	ISO 28927-3	Under 2.5	0.3	ISO 8662-8	88	99
51226	2" Self-Generated Vac-Ready Disc Sander 15,000 RPM	298	0.4	21	595	15000	AOR	N/A	ISO 28927-3	Under 2.5	0.4	ISO 8662-8	87	98
51227	2" Self-Generated Vac-Ready Disc Sander 20,000 RPM	298	0.4	21	595	20000	AOR	N/A	ISO 28927-3	Under 2.5	0.5	ISO 8662-8	87	98
51230	2" Central Vac-Ready Disc Sander 12,000 RPM	298	0.4	21	595	12000	AOR	N/A	ISO 28927-3	Under 2.5	0.3	ISO 8662-8	82	93
51231	2" Central Vac-Ready Disc Sander 15,000 RPM	298	0.4	21	595	15000	AOR	N/A	ISO 28927-3	Under 2.5	0.4	ISO 8662-8	79	90
51232	2" Central Vac-Ready Disc Sander 20,000 RPM	298	0.4	21	595	20000	AOR	N/A	ISO 28927-3	Under 2.5	0.5	ISO 8662-8	81	92
51235	2" Self-Generated Vac-Ready Disc Sander 7 Degree 25,000 RPM	298	0.4	20	566	25000	AOR	N/A	ISO 28927-3	Under 2.5	0.9	ISO 8662-8	89	100
51236	2" Central Vac-Ready Disc Sander 7 Degree 25,000 RPM	298	0.4	20	566	25000	AOR	N/A	ISO 28927-3	Under 2.5	0.9	ISO 8662-8	89	100
51259	.4 hp Right Angle Die Grinder, 20,000 RPM	298	0.4	21	595	20000	AOR	N/A	ISO 28927-12	Under 2.5	0.5	ISO 8662-13	85	96
51300	1/4" & 6 mm Collet Die Grinder	373	0.5	24	680	15000	8	4.9	ISO 28927-12	Under 2.5	1.1	ISO 8662-13	78	89
51301	1/4" & 6 mm Collet Die Grinder	373	0.5	24	680	18000	Under 2.5	1.1	ISO 28927-12	3.7	1.9	ISO 8662-13	78	89
51302	1/4" & 6 mm Collet Die Grinder	373	0.5	27	765	20000	Under 2.5	1.2	ISO 28927-12	3.7	1.9	ISO 8662-12	77	88
51303	1/4" & 6 mm Collet Die Grinder	373	0.5	27	765	24000	Under 2.5	0.6	ISO 28927-12	3.1	1.6	ISO 8662-13	83	94
51304	1/4" & 6 mm Collet Die Grinder	373	0.5	24	680	15000	4.2	0.9	ISO 28927-12	3.1	1.6	ISO 8662-13	76	87
51305	1/4" & 6 mm Collet Die Grinder	373	0.5	27	765	18000	Under 2.5	0.6	ISO 28927-12	2.8	1.4	ISO 8662-13	76	87
51306	1/4" & 6 mm Collet Die Grinder	373	0.5	24	680	20000	2.7	1	ISO 28927-12	3.5	1.8	ISO 8662-13	75	86
51307	1/4" & 6 mm Collet Die Grinder	373	0.5	27	765	24000	6	2.8	ISO 28927-12	Under 2.5	0.9	ISO 8662-13	75	86
51330	Air Powered Router	522	0.7	33	935	20000	7	2.3	ISO 20643	Under 2.5	1.3	ISO 8662-13	88	99
51332	Central Vacuum Router with 3-1/2" (89 mm) Base	522	0.7	33	935	20000	7	2.3	ISO 20643	3.5	1.8	ISO 8662-13	80	91
51333	Central Vacuum Router with 4" Base	522	0.7	33	935	20000	7	2.3	ISO 20643	3.5	1.8	ISO 8662-13	80	91
51350	11" File Board	746	1	42	1201	1250	6.5	2.3	ISO 20643	3.8	1.9	S1051	79	90
51390	Right Angle Buffer	746	1	42	1201	1250	Under 2.5	0.6	ISO 28927-3	Under 2.5	0.6	ISO 8662-8	81	92
51391	Right Angle Buffer	746	1	42	1187	1800	Under 2.5	0.9	ISO 28927-3	Under 2.5	0.5	ISO 8662-8	80	91
51392	Right Angle Buffer	746	1	41	1167	2800	2.6	1	ISO 28927-3	Under 2.5	0.5	ISO 8662-8	82	93
51393	Right Angle Buffer	746	1	35	997	4500	4.4	2	ISO 28927-3	7.3	3.7	ISO 8662-8	73	84
51394	Right Angle Buffer	746	1	42	1201	1250	Under 2.5	0.6	ISO 28927-3	Under 2.5	0.6	ISO 8662-8	81	92
51395	Right Angle Buffer	746	1	42	1187	1800	Under 2.5	0.9	ISO 28927-3	Under 2.5	0.5	ISO 8662-8	80	91
51396	Right Angle Buffer	746	1	41	1167	2800	2.6	1	ISO 28927-3	Under 2.5	0.5	ISO 8662-8	82	93
51397	Right Angle Buffer	746	1	35	997	4500	4.4	2	ISO 28927-3	7.3	3.7	ISO 8662-8	73	84
51400	3" Buffer	298	0.4	22	623	3200	Under 2.5	0.7	ISO 28927-3	Under 2.5	0	S1049	76	87
51401	3" Buffer	298	0.4	25	708	5000	Under 2.5	0.7	ISO 28927-3	Under 2.5	0.9	ISO 8662-8	81	92
51402	3" Buffer	298	0.4	22	623	3600	AOR	N/A	ISO 28927-3	Under 2.5	0.6	ISO 28927-3	76	87
51410	Mini-Dynorbital® Random Orbital Sander	298	0.4	22	623	3200	Under 2.5	0.9	ISO 28927-3	8.7	3.5	ISO 8662-8	74	85
51411	Mini-Dynorbital® Random Orbital Sander	298	0.4	22	623	3200	Under 2.5	0.9	ISO 28927-3	8.7	3.5	ISO 8662-8	74	85
51412	Mini-Dynorbital® Random Orbital Sander	298	0.4	25	708	5000	Under 2.5	0.7	ISO 28927-3	N/A	N/A	ISO 8662-8	75	86
51430	5" Diameter Buffer	298	0.4	22	623	3200	Under 2.5	0.7	ISO 28927-3	Under 2.5	0.2	S1049	76	87
51450	Two-Hand Buffer-Sander (5/8"-11 male spindle)	522	0.7	25	708	3400	Under 2.5	0.8	ISO 28927-3	N/A	N/A	ISO 8662-8	81	92
51451	Two-Hand Buffer-Sander (5/8"-11 male spindle)	522	0.7	25	708	4500	8.6	1.4	ISO 28927-3	Under 2.5	0.7	ISO 8662-8	80	91
51454	Two-Hand Buffer-Sander (M14 male spindle)	522	0.7	41	1161	3400	Under 2.5	0.8	ISO 28927-3	N/A	N/A	ISO 8662-8	81	92
51455	Two-Hand Buffer-Sander (M14 male spindle)	522	0.7	25	708	4500	8.6	1.4	ISO 28927-3	Under 2.5	0.7	ISO 8662-8	80	91
51458	6" & 8" Buffer/Polisher, 2,500 RPM, M14	522	0.7	27	765	2500	Under 2.5	1.1	ISO 28927-3	N/A	N/A	ISO 8662-8	80	91
51459	6" & 8" Buffer/Polisher, 2,500 RPM, 5/8"-11	522	0.7	27	765	2500	Under 2.5	0.7	ISO 28927-3	N/A	N/A	ISO 8662-8	80	91
51470	6" Sander Polisher	522	0.7	34	963	2000	Under 2.5	0.7	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	77	88
51472	6" Sander Polisher	522	0.7	34	963	3100	Under 2.5	0.7	ISO 28927-3	N/A	N/A	ISO 8662-8	78	89
51474	6" Wet Sander Polisher (Basic Model)	522	0.7	34	963	2000	Under 2.5	1.1	ISO 28927-3	Under 2.5	0.4	ISO 8662-8	77	88
51476	6" Wet Sander Polisher (Basic Model)	522	0.7	34	963	3100	6.1	1.1	ISO 28927-3	Under 2.5	0.5	ISO 8662-8	78	89
51479	6" Wet Sander Polisher (Deluxe Model)	522	0.7	34	963	2000	6.1	1.1	ISO 28927-3	Under 2.5	0.4	ISO 8662-8	77	88
51520	Wet Polisher .7 hp, 500 - 3,600 RPM, Rear Exhaust	522	0.7	46	1303	3600	Under 2.5	0.6	ISO 28927-3	N/A	N/A	N/A	80	91
51570	R.O. Polisher- 1 hp, Right Angle (Rotary)	746	1	41	1161	2800	5.5	4.7	ISO 28927-3	3.4	1.7	ISO 8662-8	82	93
51570	R.O. Polisher- 1 hp, Right Angle (Random)	746	1	41	1161	2800	4.5	3.3	ISO 28927-3	3.4	1.7	ISO 8662-8	82	93
51600	6" Sander Polisher (Metric Thread)	522	0.7	34	963	2000	Under 2.5	0.7	ISO 28927-3	Under 2.5	0.4	ISO 8662-8	77	88
51601	Sander Polisher (Metric Thread)	522	0.7	34	963	3100	Under 2.5	0.7	ISO 28927-3	Under 2.5	0.7	ISO 28927-3	78	89
51622	Central Vac-Ready Pencil Die Grinder (1/8" Collet)	75	0.1	4	113	35000	Under 2.5	1.2	ISO 28927-12	Under 2.5	0.6	ISO 8662-13	63	74
51623	Extension Central Vac-Ready Pencil Die Grinder (1/8" Collet)	75	0.1	4	113	35000	7	4.1	ISO 28927-12	Under 2.5	0.8	ISO 8662-13	63	74
51624	Central Vac-Ready Pencil Die Grinder (3 mm Collet)	75	0.1	4	113	35000	Under 2.5	1.2	ISO 28927-12	Under 2.5	0.8	ISO 8662-13	63	74
51629	Central Vac-Ready Pencil Die Grinder (1/8" Collet)	75	0.1	4	113	50000	2.9	1.7	ISO 28927-12	Under 2.5	0.5	ISO 8662-13	64	75
51630	Extension Central Vac-Ready Pencil Die Grinder (1/8" Collet)	75	0.1	4	113	50000	Under 2.5	0.7	ISO 28927-12	Under 2.5	0.5	ISO 8662-13	64	75
51631	Central Vac-Ready Pencil Die Grinder (3 mm Collet)	75	0.1	4	113	50000	2.9	1.7	ISO 28927-12	Under 2.5	0.5	ISO 8662-13	64	75
51632	Central Vac-Ready Pencil Die Grinder (1/8" Collet)	75	0.1	4	113	60000	Under 2.5	0.6	ISO 28927-12	Under 2.5	0.5	ISO 8662-13	70	81
51633	Extension Central-Vac Ready Pencil Die Grinder (1/8" Collet)	75	0.1	4	113	60000	Under 2.5	0.8	ISO 28927-12	Under 2.5	1.1	ISO 8662-13	70	81
51634	Central Vac-Ready Pencil Die Grinder (3 mm Collet)	75	0.1	4	113	60000	Under 2.5	0.6	ISO 28927-12	Under 2.5	1.1	ISO 8662-13	68	79
51700	Pencil Die Grinder (1/8" Collet)	75	0.1	4	113	60000	Under 2.5	0.6	ISO 28927-12	Under 2.5	1.1	ISO 8662-13	76	87
51701	Pencil Die Grinder (3 mm Collet)	75	0.1	5	142	60000	Under 2.5	0.6	ISO 28927-12	Under 2.5	1.1	ISO 8662-13	76	87
51702	Pencil Die Grinder (3/32" Collet)	75	0.1	5	142	60000	Under 2.5	0.6	ISO 28927-12	Under 2.5	1.1	ISO 8662-13	76	87
51703	Pencil Die Grinder (1/8" Collet)	75	0.1	4	113	50000	2.9	1.7	ISO 28927-12	Under 2.5	0.5	ISO 8662-13	65	76
51704	Pencil Die Grinder (3 mm Collet)	75	0.1	4	113	50000	2.9	1.7	ISO 28927-12	Under 2.5	0.5	ISO 8662-13	65	76
51705	Pencil Die Grinder (3/32" Collet)	75	0.1	4	113	50000	2.9	1.7	ISO 28927-12	Under 2.5	0.5	ISO 8662-13	65	76
51706	Pencil Die Grinder (1/8" Collet)	75	0.1	4	113	35000	Under 2.5	1.2	ISO 28927-12	Under 2.5	0.8	ISO 8662-13	62	73
51707	Pencil Die Grinder (3 mm Collet)	75	0.1	4	113	35000	Under 2.5	1.2	ISO 28927-12	Under 2.5	0.8	ISO 8662-13	62	73
51708	Pencil Die Grinder (3/32" Collet)	75	0.1	4	113	35000	Under 2.5	1.2	ISO 28927-12	Under 2.5	0.8	ISO 8662-13	62	73
51730	Pencil Die Grinder - Ceramic Bearings (1/8" Collet)	75	0.1	4	113	50000	2.9	1.7	ISO 28927-12	Under 2.5	0.7	ISO 8662-13	66	77
51731	Pencil Die Grinder - Ceramic Bearings (1/8" Collet)	75	0.1	8	227	60000	Under 2.5	0.6	ISO 28927-12	Under 2.5	0.5	ISO 8662-13	68	79
51732	Pencil Die Grinder - Ceramic Bearings (3 mm Collet)	75	0.1	4	113	50000	2.9	1.7	ISO 28927-12	Under 2.5	0.7	ISO 8662-13	77	88
51733	Pencil Die Grinder - Ceramic Bearings (3 mm Collet)	75	0.1	8	227	60000	Under 2.5	0.6	ISO 28927-12	Under 2.5	0.8	ISO 8662-13	68	79
51740	Pencil Die Grinder w/Permanent Mount Stem (1/8" Collet)	75	0.1	8	227	60000	Under 2.5	0.6	ISO 28927-12	Under 2.5	0.5	ISO 8662-13	67	78
51742	Pencil Die Grinder w/Permanent Mount Stem (3 mm Collet)	75	0.1	8	227	60000	Under 2.5	0.6	ISO 28927-12	Under 2.5	0.8	ISO 8662-13	67	78
51750	Extension Pencil Die Grinder (1/8" Collet)	75	0.1	5	142	60000	Under 2.5	0.8	ISO 28927-12	Under 2.5	1.1	ISO 8662-13	67	78
51753	Extension Pencil Die Grinder (1/8" Collet)	75	0.1	8	221	50000	Under 2.5	0.7	ISO 28927-12	Under 2.5	0.9	ISO 8662-13	67	78
51756	Extension Pencil Die Grinder (1/8" Collet)	75	0.1	8	221	35000	Under 2.5	1.1	ISO 28927-12	Under 2.5	0.8	ISO 8662-13	62	73
51810	Pencil Die Grinder - Ceramic Bearings (1/8" Collet)	N/A	N/A	6	170	100000	Under 2.5	0.7	ISO 28927-12	Under 2.5	0.8	ISO 8662-13	70	81
51811	Pencil Die Grinder - Ceramic Bearings (1/16" Collet)	N/A	N/A	6	170	100000	Under 2.5	0.7	ISO 28927-12	Under 2.5	1.3	ISO 8662-13	70	81
51812	Pencil Die Grinder - Ceramic Bearings (3/32" Collet)	N/A	N/A	6	170	100000	Under 2.5	0.7	ISO 28927-12	Under 2.5	1.3	ISO 8662-13	70	81
51813	Pencil Die Grinder - Ceramic Bearings (3 mm Collet)	N/A	N/A	6	170	100000	Under 2.5	0.7	ISO 28927-12	Under 2.5	1.3	ISO 8662-13	70	81
51827	.7 hp Trim Router 20,000 RPM	522	0.7	39	1104	20000	Under 2.5	1.7	ISO 20643	N/A	N/A	N/A	78	89
51846	Drill	298	0.4	17	481	12000	Under 2.5	0.7	ISO 28927-5	Under 2.5	0.6	S1049	83	94
51847	Drill	298	0.4	16	453	15000	3.6	1.6	ISO 28927-5	Under 2.5	1.2	S1049	85	96
51848	Drill	298	0.4	18	510	20000	Under 2.5	0.7	ISO 28927-5	3.3	1.7	S1049	83	94
51854	.4 hp Trim Router 30,000 RPM	298	0.4	25	708	30000	Under 2.5	1.5	ISO 20643	N/A	N/A	N/A	77	88
51860	1 hp Trim Router, 20,00 RPM, Rear Exhaust	746	1	42	1189	20000	Under 2.5	0.6	ISO 20643	N/A	N/A	N/A	80	91
51862	.4 hp Trim Router, 30,000 RPM, Front Exhaust	298	0.4	21	595	30000	Under 2.5	0.7	ISO 20643	N/A	N/A	N/A	81	92
51863	.7 hp Trim Router, 20,000 RPM, Front Exhaust	522	0.7	37	1048	20000	Under 2.5	0.6	ISO 20643	N/A	N/A	N/A	85	96
51865	1 hp Trim Router, 20,000 RPM, Front Exhaust	746	1	42	1189	20000	Under 2.5	0.6	ISO 20643	N/A	N/A	N/A	80	91
52050	Lightweight Dyninger Finishing Tool (1/4" Collet)	298	0.4	27	765	3200	5	1	ISO 28927-3	Under 2.5	0	S1049	79	90
52051	4" Lightweight Dyninger Finishing Tool (6 mm Collet)	298	0.4	27	765	3200	5	1	ISO 28927-3	Under 2.5	0	S1049	79	90
52052	4" Lightweight Dyninger Finishing Tool (1/2" Arbor)	298	0.4	27	765	3200	5	1	ISO 28927-3	Under 2.5	0	S1049	79	90
52060	8" Dyninger Finishing Tool	298	0.4	29	821	950	3	1	ISO 28927-3	3	0.8	ISO 8662-8	77	88
52100	1/4" & 6 mm Collets Buffer/Polisher	522	0.7	41	1161	950	Under 2.5	0.7	ISO 28927-3	Under 2.5	0.7	ISO 28927-3	80	91
52101	1/4" & 6 mm Collets Buffer/Polisher	522	0.7	41	1161	3400	Under 2.5	0.7	ISO 28927-3	Under 2.5	0.7	ISO 8662-8	80	91
52102	1/4" & 6 mm Collets Buffer/Polisher	298	0.4	20	566	4500	Under 2.5	0.7	ISO 28927-12	Under 2.5	0.8	ISO 8662-13	82	93
52200	1/4" Collet Die Grinder	298	0.4	20	566	25000	Under 2.5	1.2	ISO 28927-12	5.4	2.2	ISO 8662-13	75	86
52202	1/4" Collet Die Grinder	298	0.4	20	566	30000	Under 2.5	0.7	ISO 28927-12	5	2.5	ISO 8662-13	84	95
52204	1/4" & 6 mm Collet Die Grinder	298	0.4	20	566	25000	2.7	1.1	ISO 28927-12	Under 2.5	1.2	ISO 8662-13	70	81
52206	1/4" & 6 mm Collet Die Grinder	298	0.4	20	566	30000	3.8	0.9	ISO 28927-12	Under 2.5	0.8	ISO 8662-13	75	86
52211	1/4" & 6 mm Collet Die Grinder	298	0.4	20	566	18000	Under 2.5	0.7	ISO 28927-12	Under 2.5	0.6	ISO 8662-13	75	86
52212	1/4" & 6 mm Collet Die Grinder	298	0.4	20	566	20000	2.6	0.8	ISO 28927-12	Under 2.5	1.1	ISO 8662-13	75	86
52213	1/4" & 6 mm Collet Die Grinder	298	0.4	20	566	25000	3.2	1.6	ISO 28927-12	Under 2.5	0.9	ISO 8662-13	79	90
52216	1/4" Collet Die Grinder	373	0.5	20	566	15000	3	1.2	ISO 28927-12	N/A	N/A	ISO 8662-13	73	84
52218	1/4" Collet Die Grinder	373	0.5	20	566	20000	3.3	1.1	ISO 28927-12	Under 2.5	1.1	ISO 8662-13	77	88
52221	1/4" Collet Die Grinder	373	0.5	23	651	18000	2.9	1.2	ISO 28927-12	Under 2.5	0.6	ISO 8662-13	74	85
52222	1/4" Collet Die Grinder	373	0.5	20	566	20000	2.6	0.8	ISO 28927-12	Under 2.5	1.1	ISO 8662-13	73	84
52223	1/4" Collet Die Grinder	373	0.5	20	566	24000	3.6	0.5	ISO 28927-12	Under 2.5	0.9	ISO 8662-13	77	88
52242	1/4" & 6 mm Collet Die Grinder	298	0.4	20	566	20000	3	1	ISO 28927-12	N/A	N/A	ISO 8662-13	83	94
52256	1/4" & 6 mm Collet Die Grinder	522	0.7	20	566	15000	2.6	1.3	ISO 28927-12	N/A	N/A	ISO 8662-13	79	90
52257	1/4" & 6 mm Collet Die Grinder	522	0.7	20	566	18000	Under 2.5	0.6	ISO 28927-12	2.5	1.3	ISO 8662-13	80	91
52258	1/4" & 6 mm Collet Die Grinder	522	0.7	20	566	20000	Under 2.5	3.5	ISO 28927-12	3.5	1.8	ISO 8662-13	80	91
52267	1/4" Collet Die Grinder	373	0.5	20	566	15000	4.7	1	ISO 28927-12	Under 2.5	0.4	ISO 8662-13	73	84
52276	1/4" & 6 mm Collet Die Grinder	522	0.7	20	566	15000	Under 2.5	1.5	ISO 28927-12	Under 2.5	1.3	ISO 8662-13	81	92
52277	1/4" & 6 mm Collet Die Grinder	522	0.7	20	566	18000	Under 2.5	0.7	ISO 28927-12	N/A	N/A	ISO 8662-13	79	90
52278	1/4" & 6 mm Collet Die Grinder	522	0.7	20	566	20000	Under 2.5	0.7	ISO 28927-12	3.5	1.8	ISO 8662-13	81	92
52280	1/4" Collet Die Grinder	410	0.55	20	566	15000	3.2	0.8	ISO 28927-12	Under 2.5	0.8	ISO 8662-13	79	90
52289	1/4" & 6 mm Collet Die Grinder	522	0.7	20	566	18000	Under 2.5	1	ISO 28927-12	Under 2.5	0.7	ISO 8662-13	83	94
52290	1/4" & 6 mm Collet Die Grinder	522	0.7	20	566	20000	Under 2.5	0.7	ISO 28927-12	N/A	N/A	ISO 8662-13	82	93
52293	1/4" & 6 mm Collet Die Grinder	298	0.4	20	566	18000	3.1	0.8	ISO 28927-12	Under 2.5	0.6	ISO 8662-13	77	88
52294	1/4" & 6 mm Collet Die Grinder	298	0.4	20	566	20000	5	1.3	ISO 28927-12	Under 2.5	0.6	ISO 8662-13	79	90
52297	1/4" Collet Die Grinder with Side Handle	298	0.4	20	566	20000	3.8	0.9	ISO 28927-12	3.2	1.6	ISO 8662-13	79	90
52373	4" (102 mm) Type 1 Wheel Grinder	746	1	35	991	12000	Under 2.5	0.4	ISO 28927-4	Under 2.5	0.1	S1049	74	85
52374	4" (102 mm) Type 1 Wheel Grinder	746	1	35	991	15000	Under 2.5	0.8	ISO 28927-4	N/A	N/A	ISO 8662-4	73	84
52376	3" (76 mm) Type 1 Extension Wheel Grinder	746	1	35	991	12000	3.1	1	ISO 28927-4	6.3	2.5	ISO 8662-4	74	85
52377	3" (76 mm) Type 1 Extension Wheel Grinder	746	1	35	991	15000	4.2	1.4	ISO 28927-4	8.4	3.4	ISO 8662-4	73	84
52378	3" (76 mm) Type 1 Extension Wheel Grinder	746	1	35	991	18000	Under 2.5	1.5	ISO 28927-4	11	4.4	ISO 8662-4	79	90
52379	4" (102 mm) Type 1 Extension Wheel Grinder	746	1	38	1085	12000	3.3	1.1	ISO 28927-4	Under 2.5	0.1	S1049	74	85
52380	4" (102 mm) Type 1 Extension Wheel Grinder	746	1	35	991	12000	3.4	1.1	ISO 28927-4	Under 2.5	0.1	S1049	73	84
52400	2" Disc Sander	522	0.7	32	906	15000	Under 2.5	0.6	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	73	84
52402	2" Disc Sander	522	0.7	32	906	15000	3.6	0.9	ISO 28927-3	Under 2.5	0.6	ISO 8662-8	76	87
52405	2" Disc Sander	522	0.7	32	906	15000	3.1	1.2	ISO 28927-3	Under 2.5	0.6	ISO 8662-8	73	84
52410	3" Disc Sander	522	0.7	32	906	15000	Under 2.5	1	ISO 28927-3	Under 2.5	1	ISO 8662-8	87	98
52412	3" Disc Sander	522	0.7	36	1020	20000	3.3	1.5	ISO 28927-12	Under 2.5	1.2	ISO 8662-8	86	97
52413	3" Disc Sander	522	0.7	29	821	15000	AOR	N/A	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	77	88
52415	3" Disc Sander	522	0.7	35	991	20000	Under 2.5	0.7	ISO 28927-3	2.5	1.3	ISO 8662-8	79	90
52420	3" Cut-Off Wheel Tool	373	0.5	27	765	20000	13.5	4.4	ISO 28727-3	3.9	2	S1056	79	90
52430	4" Cut-Off Wheel Tool	373	0.5	27	765	15000	6.2	2	ISO 28727-3	Under 2.5	0.1	S1049	89	100
52431	4" Cut-Off Wheel Tool	373	0.5	27	765	20000	10	3.3	ISO 28727-3	Under 2.5	0.4	S1056	89	100
52434	3" Cut-Off Wheel Tool	373	0.5	27	765	20000	11	3.7	ISO 28727-3	Under 2.5	0.5	S1049	89	100
52435	3" Cut-Off Wheel Tool	373	0.5	27	765	20000	8.5	2.8	ISO 28727-3	Under 2.5	0.6	S1049	78	89
52436	4" Diamond Cut-Off Wheel Tool	373	0.5	27	765	20000	3.7	1.2	ISO 28727-3	Under 2.5	1	S1049	78	89
52438	5" Diamond Vac Cut-Off Wheel Tool	746	1	40	1133	12000	Under 2.5	0.7	ISO 28727-3	2.5	1.2	S1049	81	92
52500	2" Disc Sander	298	0.4	20	566	25000	2.8	0.8	ISO 28927-3	3.3	1.7	ISO 8662-8	72	83
52503	2" Disc Sander	298	0.4	20	566	25000	3	1.7	ISO 28927-3	Under 2.5	0.9	ISO 8662-8	80	91
52515	4-1/2" Dia., Right Angle Disc Sander	410	0.55	30	850	15000	Under 2.5	1.2	ISO 28927-3	Under 2.5	0.6	ISO 8662-8	79	90
52516	4-1/2" Dia., Right Angle Disc Sander w/Guard	410	0.55	33	935	15000	Under 2.5	0.7	ISO 28927-3	Under 2.5	0.6	ISO 8662-8	79	90
52518	4-1/2" Dia., Right Angle Disc Sander w/Guard	410	0.55	33	935	15000	Under 2.5	0.7	ISO 28927-3	Under 2.5	0.6	ISO 8662-8	79	90
52537	3" Extension Cut-Off Wheel Tool (Central Vac-Ready)	746	1	41	1161	18000	Under 2.5	0	ISO 28727-3	Under 2.5	0.5	S1049	79	90
52538	3" Cut-Off Wheel Tool	298	0.4	21	595	12000	Under 2.5	0.1	ISO 28727-3	Under 2.5	0.3	S1049	84	95
52557	2" - 3" Right Angle Disc Sander	410	0.55	30	850	15000	Under 2.5	0.8	ISO 28727-3	Under 2.5	0.4	ISO 8662-8	79	90
52558	2" - 3" Right Angle Disc Sander	410	0.55	27	765	15000	Under 2.5	1.1	ISO 28727-3	Under 2.5	5.1	ISO 8662-8	76	87
52561	4-1/2" to 5" Right Angle Disc Sander	746	1	40	1138	11000	5.7	1.7	ISO 28727-3	Under 2.5	0.9	ISO 8662-8	78	89
52562	4-1/2" to 5" Right Angle Disc Sander	746	1	39	1116	9000	3.8	1.1	ISO 28927-3	Under 2.5	0.7	ISO 8662-8	72	83
52563	7" Right Angle Disc Sander	746	1	39	1116	6000	3.9	1.4	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	75	86
52564	4-1/2" - 5" Disc Sander	746	1	39	1116	9000	3.8	1.1	ISO 28927-3	Under 2.5	0.7	ISO 8662-8	72	83
52565	4-1/2" - 5" Disc Sander	746	1	41	1172	11000	5.7	1.7	ISO 28727-3	Under 2.5	0.9	ISO 8662-8	76	87
52573	4" (102 mm) Cut-Off Wheel Tool	746	1	41	1172	15000	7.2	2.4	ISO 28727-1	Under 2.5	0.2	S1049	73	84
52574	4" (102 mm) Cut-Off Wheel Tool	746	1	41	1172	18000	8	2.7	ISO 28727-1	Under 2.5	0.2	S1049	79	90
52576	3" (76 mm) Cut-Off Wheel Tool with 6" (152 mm) Extension	746	1	41	1172	15000	6.9	3.2	ISO 28727-1	Under 2.5	0.1	S1049	73	84
52577	3" (76 mm) Cut-Off Wheel Tool with 6" (152 mm) Extension	746	1	41	1172	18000	11.5	3.8	ISO 28727-1	Under 2.5	0.2	S1049	79	90
52578	3" (76 mm) Cut-Off Wheel Tool with 6" (152 mm) Extension	746	1	41	1172	20000	4.4	1.5	ISO 28727-1	Under 2.5	0.3	S1049	77	88
52579	4" (102 mm) Cut-Off Wheel Tool with 6" (152 mm) Extension	746	1	41	1172	15000	10.5	3.5	ISO 28727-1	Under 2.5	0.1	S1049	73	84
52580	4" (102 mm) Cut-Off Wheel Tool with 6" (152 mm) Extension	746	1	41	1172	18000	17.5	5.8	ISO 28727-1	Under 2.5	0.2	S1049	79	90
52590	2" - 3" Right Angle Disc Sander	246	0.33	30	850	18000	Under 2.5	0.6	ISO 28927-3	Under 2.5	0.7	ISO 28927-3	77	88
52596	5" Central Vacuum Ready Disc Sander	969	1.3	42	1189	12000	3.8	1.5	ISO 28927-3	Under 2.5	0.7	ISO 8662-8	81	92
52597	7" Vacuum Disc Sander	969	1.3	42	1189	6000	4.2	0.8	ISO 28927-3	Under 2.5	1.2	ISO 8662-8	76	87
52615	5" Vacuum Cut-Off Wheel Tool, 1.3 hp	969	1.3	40	1133	12000	Under 2.5	0.4	ISO 28727-3	N/A	N/A	N/A	84	95
52630	4" Grinder 1.3hp 13,500 RPM	969	1.3	41	1172	13500	6.7	1.3	ISO 28727-1	3	1.5	ISO 8662-4	83	94
52631	4" Sander 1.3 hp 12,000 RPM	969	1.3	42	1189	12000	4.1	1.1	ISO 28927-3	Under 2.5	0.5	ISO 8662-8	78	89
52632	4-1/2" Grinder 1.3 hp 12,000 RPM	969	1.3	41	1172	12000	8.5	2.5	ISO 28727-1	Under 2.5	1.5	ISO 8662-4	78	89
52633	5" Grinder 1.3 hp 12,000 RPM	969	1.3	41	1172	11000	7.1	2.3	ISO 28727-1	Under 2.5	1.2	ISO 8662-4	78	89
52634	4-1/2" Sander 1.3 hp 12,000 RPM	969	1.3	42	1189	12000	5.5	1	ISO 28927-3	Under 2.5	0.7	ISO 8662-8	78	89
52635	5" Sander 1.3 hp 12,000 RPM	969	1.3	42	1189	12000	3.8	1.4	ISO 28927-3	Under 2.5	0.7	ISO 8662-8	78	89
52638	Grinder, 115 mm Right Angle, 12,000 RPM	746	1	41	1172	11000	8.5	2.8	ISO 28727-1	Under 2.5	1.6	ISO 8662-4	78	89
52639	127 mm Depressed Center Wheel Grinder	746	1	41	1172	11000	7.1	2.3	ISO 28727-1	Under 2.5	0.7	ISO 8662-4	80	91
52657	1.3 hp Right Angle 7" Disc Sander	969	1.3	42	1189	6000	4.2	0.8	ISO 28927-3	Under 2.5	0.7	ISO 8662-8	76	87
52660	1/4" Collet Slow-Speed Double Planetary-Geared Die Grinder	746	1	42	1189	950	2.8	1.3	ISO 28727-3	Under 2.5	0.2	S1049	79	90
52662	1/4" Collet Slow-Speed Single Planetary-Geared Die Grinder	746	1	30	850	3400	Under 2.5	0.7	ISO 28927-12	Under 2.5	0.2	S1049	76	87
52663	1/4" Collet Slow-Speed Single Planetary-Geared Die Grinder	746	1	30	850	4500	3.3	1	ISO 28927-12	0.29	0.1	S1049	78	89
52665	1/4" & 6 mm Collet Die Grinder	746	1	30	850	9000	Under 2.5	0.6	ISO 28927-12	2.8	1.4	ISO 8662-13	73	84
52666	1/4" & 6 mm Collet Die Grinder	746	1	30	850	12000	Under 2.5	0.6	ISO 28927-12	Under 2.5	1.2	ISO 8662-13	74	85
52667	1/4" & 6 mm Collet Die Grinder	746	1	30	850	15000	Under 2.5	0.9	ISO 28927-12	2.6	1.3	ISO 8662-13	73	84
52668	1/4" & 6 mm Collet Die Grinder	746	1	30	850	18000	3	0.8	ISO 28927-12	Under 2.5	0.9	ISO 8662-13	79	90
52669	1/4" & 6 mm Collet Die Grinder	746	1	30	850	20000	Under 2.5	1.1	ISO 28927-12	Under 2.5	1	ISO 8662-13	77	88
52673	1/4" Collet 6" Extension Die Grinder	746	1	30	850	4500	Under 2.5	0.7	ISO 28927-12	Under 2.5	0.1	S1049	78	89
52675	1/4" & 6 mm Collet 6" Extension Die Grinder	746	1	30	850	9000	4.7	1	ISO 28927-12	3.9	2	ISO 8662-13	73	84
52678	1/4" & 6 mm Collet 6" Extension Die Grinder	746	1	30	850	18000	Under 2.5	0.9	ISO 28927-12	4	2	ISO 8662-13	79	90
52679	1/4" & 6 mm Collet 6" Extension Die Grinder	746	1	30	850	20000	Under 2.5	0.8	ISO 28927-12	4.2	2.1	ISO 8662-13	77	88
52700	3" Depressed Center Wheel Grinder	522	0.7	18	510	18000	20.3	0.7	ISO 28727-3	Under 2.5	0.3	S1049	83	94
52710	2" Depressed Center Wheel Grinder	298	0.4	18	510	12000	2.6	0.9	ISO 28727-3	Under 2.5	0.2	ISO 8662-4	83	94
52711	2" Depressed Center Wheel Grinder	298	0.4	19	538	15000	4.8	1.6	ISO 28727-3	Under 2.5	0.3	ISO 8662-4	85	96
52712	2" Depressed Center Wheel Grinder	298	0.4	18	510	20000	AOR	N/A	ISO 28727-3	Under 2.5	0.2	S1049	83	94
52715	Cone or Plug Wheel Grinder	746	1	19	538	12000	Under 2.5	0.1	ISO 28927-4	Under 2.5	0.1	S1049	74	85
52716	Cone or Plug Wheel Grinder	746	1	19	538	15000	Under 2.5	0.2	ISO 28927-4	Under 2.5	0.1	S1049	73	84
52717	Cone or Plug Wheel Grinder	746	1	19	538	18000	Under 2.5	0.2	ISO 28927-4	Under 2.5	0.1	S1049	79	90
52718	Cone or Plug Wheel Grinder	746	1	19	538	20000	Under 2.5	0.3	ISO 28927-4	Under 2.5	0.1	S1049	77	88
52719	Cone or Plug Extension Wheel Grinder	746	1	19	538	12000	Under 2.5	0.4	ISO 28927-4	Under 2.5	0.1	S1049	74	85
52720	Cone or Plug Extension Wheel Grinder	746	1	19	538	15000	Under 2.5	0.3	ISO 28927-4	Under 2.5	0.2	S1049	73	84
52721	Cone or Plug Extension Wheel Grinder	746	1	19	538	18000	Under 2.5	0.5	ISO 28927-4	Under 2.5	0.2	S1049	79	90
52722	Cone or Plug Extension Wheel Grinder	746	1	19	538	20000	2.6	0.9	ISO 28927-4	Under 2.5	0.2	S1049	77	88
52760	1.3 hp Right Angle Tool With DynaLocke® Head 12,000 RPM (Random)	969	1.3	43	1218	12000	8.1	1.1	ISO 28927-3	3.4	1.7	ISO 8662-8	78	89
52760	1.3 hp Right Angle Tool With DynaLocke® Head 12,000 RPM (Rotary)	969	1.3	43	1218	12000	2.8	1.7	ISO 28927-3	3.4	1.7	ISO 8662-8	78	89
52802	1.3 hp Right Angle Sander 7,200 RPM 5/8 - 11 Spindle	969	1.3	42	1189	7200	2.6	0.8	ISO 28927-3	Under 2.5	1.2	ISO 8662-8	77	88
52831	.4 hp Pistol Grip Drill with 53030 Dynachuck 500 RPM (Pistol Grip Handle)	298	0.4	23	651	500	Under 2.5	1.5	ISO 28927-5	N/A	N/A	ISO 8662-5	76	87
52831	.4 hp Pistol Grip Drill with 53030 Dynachuck 500 RPM (Side Handle)	298	0.4	23	651	500	Under 2.5	1.5	ISO 28927-5	N/A	N/A	ISO 8662-5	76	87
52832	.4 hp Pistol Grip Drill with 53030 Dynachuck 1,000 RPM	298	0.4	25	708	1000	Under 2.5	1.5	ISO 28927-5	N/A	N/A	ISO 8662-5	77	88
52833	.4 hp Pistol Grip Drill with 53030 Dynachuck 2,400 RPM	298	0.4	22	623	2400	3.6	1.1	ISO 28927-5	N/A	N/A	ISO 8662-5	72	83
52834	.4 hp Pistol Grip Drill with 53030 Dynachuck 3,600 RPM	298	0.4	23	651	3600	Under 2.5	1.5	ISO 28927-5	N/A	N/A	ISO 8662-5	73	84
52835	.4 hp Pistol Grip Drill with 53030 Dynachuck 5,500 RPM	298	0.4	25	708	5500	4.6	1.5	ISO 28927-5	N/A	N/A	ISO 8662-5	78	89
52836	.4 hp Pistol Grip Drill with 53030 Dynachuck 20,000 RPM	298	0.4	22	623	20000	2.6	0.8	ISO 28927-5	N/A	N/A	ISO 8662-5	78	89
52850	Variable Speed Pencil Grinder, 1/8" Collet, 60,000 RPM	75	0.1	3.5	99	60000	Under 2.5	0.6	ISO 28927-12	N/A	N/A	N/A	67	78
52855	Variable Speed Pencil Grinder, 3 mm Collet, 60,000 RPM	75	0.1	3.5	99	60000	Under 2.5	0.6	ISO 28927-12	N/A	N/A	N/A	67	78
52861	Slow-Speed Pencil Die Grinder (1/8" Collet)	224	0.3	20	566	25000	2.6	2	ISO 28927-12	Under 2.5	1.1	ISO 8662-13	76	87
52862	Slow-Speed Pencil Die Grinder (3 mm Collet)	224	0.3	20	566	25000	2.6	2	ISO 28927-12	Under 2.5	1.1	ISO 8662-13	76	87
52863	Slow-Speed Pencil Die Grinder (1/4" Collet)	224	0.3	20	566	25000	Under 2.5	0.7	ISO 28927-12	Under 2.5	1.3	ISO 8662-13	76	87
52864	Slow-Speed Pencil Die Grinder (6 mm Collet)	224	0.3	20	566	25000	Under 2.5	0.7	ISO 28927-12	Under 2.5	1.1	ISO 8662-13	76	87
52900	3" x 24" Belt Sander, Central Vac	768	1.03	62	1756	3440	Under 2.5	0.6	ISO 20643	Under 2.5	0.2	S1049	85	96
52903	.4 hp Pistol Grip, Central Vacuum Drill 500 RPM (Housing)	298	0.4	23	651	500	Under 2.5	1.5	ISO 28927-5	N/A	N/A	ISO 8662-5	76	87
52904	.4 hp Pistol Grip, Central Vacuum Drill 1,000 RPM	298	0.4	25	708	1000	2.9	1.5	ISO 28927-5	N/A	N/A	ISO 8662-5	80	91
52905	.4 hp Pistol Grip, Central Vacuum Drill 2,400 RPM	298	0.4	22	623	2400	3.8	0.9	ISO 28927-5	N/A	N/A	ISO 8662-5	77	88
52906	.4 hp Pistol Grip, Central Vacuum Drill 3,600 RPM	298	0.4	23	651	3600	Under 2.5	1.5	ISO 28927-5	N/A	N/A	ISO 8662-5	80	91
52907	.4 hp Pistol Grip, Central Vacuum Drill 5,500 RPM	298	0.4	25	708	5500	2.9	1.5	ISO 28927-5	N/A	N/A	ISO 8662-5	81	92
52931	.4 hp Pistol Grip Drill with 53032 Jacobs Chuck 500 RPM	298	0.4	23	651	500	Under 2.5	1.5	ISO 28927-5	N/A	N/A	ISO 8662-5	72	83
52932	.4 hp Pistol Grip Drill with 53032 Jacobs Chuck 1,000 RPM	298	0.4	25	708	1000	3.4	1.5	ISO 28927-5	N/A	N/A	ISO 8662-5	75	86
52933	.4 hp Pistol Grip Drill with 53032 Jacobs Chuck 2,400 RPM	298	0.4	22	623	2400	4.3	1.5	ISO 28927-5	N/A	N/A	ISO 8662-5	72	83
52934	.4 hp Pistol Grip Drill with 53032 Jacobs Chuck 3,600 RPM	298	0.4	23	651	3600	Under 2.5	1.5	ISO 28927-5	N/A	N/A	ISO 8662-5	73	84
52935	.4 hp Pistol Grip Drill with 53032 Jacobs Chuck 5,500 RPM	298	0.4	25	708	5500	3.4	1.5	ISO 28927-5	N/A	N/A	ISO 8662-5	73	84
52936	.4 hp Pistol Grip Drill with 53032 Jacobs Chuck 20,000 RPM	298	0.4	22	623	20000	4.5	1.5	ISO 28927-5	N/A	N/A	ISO 8662-5	78	89
52986	.4 hp Pistol Grip Drill with 53087 Jacobs Chuck 500 RPM	298	0.4	23	651	500	Under 2.5	1.5	ISO 28927-5	N/A	N/A	ISO 8662-5	83	94
52987	.4 hp Pistol Grip Drill with 53087 Jacobs Chuck 1,000 RPM	298	0.4	25	708	1000	2.9	1.5	ISO 28927-5	N/A	N/A	ISO 8662-5	81	92
53037	1/4" Drill .5 hp 20K Front Exhaust	373	0.5	25	708	20000	Under 2.5	0.6	ISO 28927-5	Under 2.5	0.3	S1049	84	95
53046	1/4" Drill .4 hp 12K Rt. Angle Rear Exhaust	298	0.4	18	510	12000	Under 2.5	0.7	ISO 28927-5	Under 2.5	0.6	S1049	83	94
53047	1/4" Drill .4 hp 15K Rt. Angle Rear Exhaust	298	0.4	19	538	15000	3.6	1.6	ISO 28927-5	Under 2.5	1.2	S1049	81	92
53048	1/4" Drill .4 hp 20K Rt. Angle Rear Exhaust	298	0.4	18	510	20000	Under 2.5	0.7	ISO 28927-5	3.3	1.7	S1049	81	92
53060	3/8" Drill 3400 RPM Pistol grip drill.	522	0.7	25	708	3400	Under 2.5	0.6	ISO 28927-5	Under 2.5	0.2	S1049	81	92
53072	1/4" Drill .4 hp, 950 RPM, 7 Degree Offset,	298	0.4	25	708	950	Under 2.5	1.7	ISO 28927-5	Under 2.5	0	S1049	73	84
53073	1/4" Drill .4 hp, 3,200 RPM, 7 Degree Offset	298	0.4	21	592	3200	Under 2.5	0.9	ISO 28927-5	Under 2.5	0	S1049	77	88
53074	1/4" Drill .4 hp, 5,000 RPM, 7 Degree Offset	298	0.4	19	538	5000	3	1.2	ISO 28927-5	Under 2.5	0.1	S1049	76	87
53077	1/4" Drill .4 hp, 950 RPM, Straight-Line	298	0.4	29	821	950	3.4	2.1	ISO 28927-5	Under 2.5	0	S1049	75	86
53078	1/4" Drill .4 hp, 3,200 RPM, Straight-Line	298	0.4	27	765	3200	Under 2.5	0.4	ISO 28927-5	Under 2.5	0.1	S1049	77	88
53079	1/4" Drill .4 hp 5000 RPM Straight-Line	298	0.4	26	736	5000	Under 2.5	1.1	ISO 28927-5	Under 2.5	0.1	S1049	79	90
53080	1/2" Drill .7 hp, 3,400 RPM, 7 Degree Offset	522	0.7	25	708	3400	Under 2.5	0.6	ISO 28927-5	Under 2.5	0.3	S1049	81	92
53081	1/2" Drill .7 hp, 4,500 RPM, 7 Degree Offset	522	0.7	40	1133	4500	Under 2.5	1	ISO 28927-5	Under 2.5	0.2	S1049	81	92
53090	1/2" Dril l.7 hp, 950 RPM, Pistol Grip, Geared	522	0.7	25	708	950	Under 2.5	1	ISO 28927-5	Under 2.5	0.2	S1049	79	90
53091	3/8" Drill .7 hp, 950 RPM, Pistol Grip, Geared	522	0.7	25	708	950	Under 2.5	1	ISO 28927-5	Under 2.5	0.2	S1049	81	92
53092	.7 hp Pistol Grip Drill with 1/2" Keyed Chuck 500 RPM	522	0.7	25	708	500	Under 2.5	0.6	ISO 28927-5	Under 2.5	1.5	ISO 28927-5	76	87
53093	.7 hp Pistol Grip Drill with 3/8" Keyless Chuck 1,800 RPM	522	0.7	25	708	1800	5.1	1.5	ISO 28927-5	Under 2.5	1.5	ISO 28927-5	73	84
53094	.7 hp Pistol Grip Drill with 3/8" Keyless Chuck 2,400 RPM	522	0.7	30	850	2400	AOR	N/A	ISO 28927-5	Under 2.5	1.5	ISO 28927-5	81	92
53095	3/8" Drill .7 hp, 4,500 RPM, Pistol-Grip, Geared	522	0.7	25	708	4500	Under 2.5	0.7	ISO 28927-5	Under 2.5	0.2	S1049	81	92
53096	3/8" Drill .7 hp, 20,000 RPM, Pistol Grip	522	0.7	25	708	20000	Under 2.5	0.6	ISO 28927-5	2.5	1.3	S1049	86	97
53103	.7 hp 3/8" Central Vacuum Keyless Chuck 3,400 RPM Drill	522	0.7	25	708	3400	Under 2.5	0.6	ISO 28927-5	5.3	2.1	ISO 28927-5	84	95
53104	.7 hp 3/8" Central Vacuum Keyless Chuck 4,500 RPM Drill	522	0.7	25	708	4500	Under 2.5	0.7	ISO 28927-5	3.9	2	ISO 28927-5	84	95
53105	.7 hp 3/8" Central Vacuum Keyless Chuck 950 RPM Drill	522	0.7	25	708	950	Under 2.5	1	ISO 28927-5	3.7	1.9	ISO 28927-5	85	96
53106	.7 hp 1/2" Central Vacuum Keyed Chuck 950 RPM Pistol Grip Drill	522	0.7	25	708	950	Under 2.5	0.6	ISO 28927-5	4.7	2.4	ISO 28927-5	85	96
53135	3,200 RPM Vacuum Angle head Drill .4 hp	298	0.4	21	595	3200	AOR	N/A	ISO 28927-5	Under 2.5	0.3	ISO 28927-5	77	88
53232	2 hp Vertical Depressed Center Wheel Grinder 7"Ø 6,000 RPM	1491	2	80	2266	6000	4.4	1.4	ISO 28727-3	N/A	N/A	ISO 8862-4	84	95
53233	2 hp Cup Wheel Grinder	1491	2	80	2266	6000	Under 2.5	0.6	ISO 28727-3	N/A	N/A	ISO 8862-4	83	94
53234	2 hp Vertical Depressed Center Wheel Grinder 7"Ø 7,200 RPM	1491	2	81	2294	7200	5.3	1.5	ISO 28727-3	N/A	N/A	ISO 8862-4	81	92
53235	2 hp Vertical Depressed Center Wheel Grinder 7"Ø 8,500 RPM	1491	2	81	2294	8500	7	2.3	ISO 28727-3	N/A	N/A	ISO 8862-4	81	92
53242	3 hp Vertical Depressed Center Wheel Grinder 7"Ø 6,000 RPM	2237	3	89	2520	6000	4.7	1.5	ISO 28727-3	N/A	N/A	ISO 8862-4	83	94
53243	3 hp Cup Wheel Grinder	2237	3	80	2266	6000	Under 2.5	0.4	ISO 28727-3	N/A	N/A	ISO 8862-4	82	93
53244	3 hp Vertical Depressed Center Wheel Grinder 7"Ø 7,200 RPM	2237	3	98	2775	7200	5.7	1.9	ISO 28727-3	N/A	N/A	ISO 8862-4	86	97
53245	3 hp Vertical Depressed Center Wheel Grinder 7"Ø 8,500 RPM	2237	3	97	2747	8500	6.5	2.2	ISO 28727-3	N/A	N/A	ISO 8862-4	85	96
53249	3 hp 9" Vertical Grinder	2237	3	87	2464	6000	3.9	1.3	ISO 28727-3	N/A	N/A	N/A	85	96
53251	2 hp Vertical 7"Ø Sander 6,000 RPM	1491	2	80	2266	6000	5.8	1.1	ISO 28927-3	N/A	N/A	ISO 8662-3	81	92
53252	2 hp Vertical 7"Ø Sander 7,200 RPM	1491	2	80	2266	7200	Under 2.5	0.6	ISO 28927-3	N/A	N/A	ISO 8662-8	81	92
53253	2 hp Vertical 7"Ø Sander 8,500 RPM	1491	2	80	2266	8500	2.7	0.7	ISO 28927-3	N/A	N/A	ISO 8662-8	80	91
53261	3hp Vertical Disc Sander 6,000 RPM	2237	3	89	2520	6000	3.7	1.3	ISO 28927-3	N/A	N/A	ISO 8662-8	79	90
53262	3hp Vertical Disc Sander 7,200 RPM	2237	3	98	2775	7200	5.5	1.9	ISO 28927-3	N/A	N/A	ISO 8662-8	82	93
53263	3hp Vertical Disc Sander 8,500 RPM	1491	2	80	2266	8500	Under 2.5	0.7	ISO 28927-3	N/A	N/A	ISO 8662-8	82	93
53300	3 hp Horizontal Grinder 6" 6,000 RPM	2237	3	68	1926	6000	Under 2.5	0.4	ISO 28927-4	N/A	N/A	N/A	88	99
53308	4 hp Horizontal grinder 6" 6,000 RPM	2983	4	83	2351	6000	Under 2.5	0.6	ISO 28927-4	N/A	N/A	N/A	90	101
53312	4 hp Horizontal grinder 6" 4,500 RPM	2983	4	75	2124	4500	Under 2.5	0.4	ISO 28927-4	N/A	N/A	N/A	87	98
53415	Mini-Dynorbital® Sander	298	0.4	20	564	3200	4.5	2.3	ISO 28927-3	3.6	1.8	ISO 8662-8	82	93
53417	Mini-Dynorbital® Sander	298	0.4	20	564	3200	Under 2.5	1.4	ISO 28927-3	2.6	1.3	ISO 8662-8	81	92
53435	Drill, .4 hp, 3,200 RPM, Right Angle, Rear Exhaust, 1/4"-28 Female Thread.	298	0.4	20	564	3200	AOR	N/A	ISO 28927-5	Under 2.5	0.1	S1049	80	91
53460	3" Buffer .4 hp 3,200 RPM	298	0.4	20	564	3200	Under 2.5	0.7	ISO 28927-3	4.1	2	ISO 8662-8	80	91
53501	1/4" Extension Die Grinder 8" long	298	0.4	20	564	18000	Under 2.5	0.6	ISO 28927-12	Under 2.5	0.2	ISO 8662-13	79	90
53502	1/4" Extension Die Grinder 8" long	298	0.4	20	564	20000	Under 2.5	0.7	ISO 28927-12	N/A	N/A	ISO 20643	77	88
53510	1/4" Extension Die Grinder 3" long	298	0.4	20	564	18000	Under 2.5	0.6	ISO 28927-12	Under 2.5	0.2	ISO 8662-13	79	90
53511	1/4" Extension Die Grinder 3" long	298	0.4	20	564	20000	Under 2.5	0.6	ISO 28927-12	Under 2.5	0.1	ISO 8662-13	77	88
53521	1 hp Multi-Extension Grinder, 1 Extension	746	1	20	564	3400	5.4	1.1	ISO 28927-12	Under 2.5	0.1	S1049	76	87
53522	1 hp Multi-Extension Grinder, 2 Extension	746	1	41	1161	3400	Under 2.5	0.7	ISO 20643	Under 2.5	0.1	S1049	76	87
53523	1 hp Multi-Extension Grinder, 3 Extension	746	1	41	1161	3400	AOR	N/A	ISO 28927-4	Under 2.5	0.1	S1049	76	87
53531	1 hp Multi-Extension Grinder, 1 Extension	746	1	20	564	18000	3.2	0.8	ISO 28927-12	Under 2.5	1.3	S1049	79	90
53532	1 hp Multi-Extension Grinder, 2 Extension	746	1	20	564	18000	6.3	2.1	ISO 28927-12	Under 2.5	0.3	S1049	79	90
53533	1 hp Multi-Extension Grinder, 3 Extension	746	1	41	1161	18000	Under 2.5	0.4	ISO 28927-4	Under 2.5	0.3	S1049	79	90
53781	0.7 hp Extention Steel Die Grinder, Rear Exhaust 1/4" Collet. 20,000 RPM	522	0.7	20	564	20000	2.6	1.4	ISO 28927-12	Under 2.5	1.2	ISO 8662-13	80	91
53783	0.7 hp Extention, cone/plug grinder, 3/8" - 24 Thread 20,000 RPM	746	1	41	1161	18000	Under 2.5	0.1	ISO 28927-4	Under 2.5	1.3	S1049	77	88
53807	0.5 hp Steel Die Grinder Front Exhaust 1/4" Collet 24,000 RPM	373	0.5	20	564	24000	Under 2.5	0.6	ISO 28927-12	Under 2.5	1.1	ISO 8662-13	76	87
53808	0.5 hp Steel Die Grinder Rear Exhaust 1/4" Collet 24,000 RPM	373	0.5	20	564	24000	Under 2.5	0.6	ISO 28927-12	Under 2.5	1.1	ISO 8662-13	76	87
53811	0.7 hp Steel Die Grinder. Front Exhaust. 1/4" Collet. 20,000 RPM	522	0.7	20	564	20000	Under 2.5	0.6	ISO 28927-12	Under 2.5	1.2	ISO 8662-13	83	94
53812	0.7 hp Steel Die Grinder. Rear Exhaust. 1/4" Collet. 20,000 RPM	522	0.7	20	564	20000	2.9	0.8	ISO 28927-12	2.5	1.2	ISO 8662-13	76	87
54343	Composite Die Grinder 12,000 RPM .7 hp	522	0.7	20	564	12000	8.1	2.4	ISO 28927-12	Under 2.5	0.5	ISO 8662-13	80	91
54347	Composite Die Grinder 12,000 RPM .7 hp Extended	522	0.7	20	564	12000	Under 2.5	0.9	ISO 28927-12	Under 2.5	0.3	ISO 8662-13	80	91
54359	Composite Die Grinder 18,000 RPM .7 hp	522	0.7	20	564	18000	5.5	2.6	ISO 28927-12	Under 2.5	0.3	ISO 8662-13	80	91
54363	Composite Die Grinder 18,000 RPM .7 hp Extended	522	0.7	20	564	18000	5	1.9	ISO 28927-12	Under 2.5	0.4	ISO 8662-13	80	91
54369	1/4" Die Grinder 12,000 RPM .7 hp Steel Housing	522	0.7	20	564	12000	Under 2.5	0.7	ISO 28927-12	Under 2.5	0.1	ISO 8662-13	77	88
54374	1/4" Extension Die Grinder 12,000 RPM .7 hp Steel Housing	522	0.7	41	1161	12000	2.7	0.8	ISO 28927-12	Under 2.5	0.1	ISO 8662-13	79	90
54387	1/4" Die Grinder 18,000 RPM .7 hp Steel Housing	522	0.7	41	1161	18000	5.8	1.5	ISO 28927-12	Under 2.5	0.3	ISO 8662-13	80	91
54391	1/4" Extension Die Grinder 18,000 RPM .7 hp Steel Housing	522	0.7	41	1161	18000	5.8	1.8	ISO 28927-12	Under 2.5	0.4	ISO 8662-13	77	88
54400	Composite 3" Disc Sander 18,000 RPM .7 hp	522	0.7	41	1161	18000	3	0.9	ISO 28927-3	N/A	N/A	ISO 8662-8	83	94
54403	Composite 3" Disc Sander 18,000 RPM Extended .7 hp	522	0.7	41	1161	18000	Under 2.5	0.7	ISO 28927-3	N/A	N/A	ISO 8662-8	81	92
54406	Composite 4" Disc Sander 12,000 RPM .7 hp	522	0.7	39	1104	12000	Under 2.5	0.7	ISO 28927-3	N/A	N/A	ISO 8662-8	79	90
54409	Composite 4" Disc Sander 12,000 RPM Extended .7 hp	522	0.7	40	1133	12000	Under 2.5	0.6	ISO 28927-3	N/A	N/A	ISO 8662-8	81	92
54421	Steel Housing 4" Disc Sander 18,000 RPM .7 hp	522	0.7	41	1161	18000	Under 2.5	0.7	ISO 28927-3	N/A	N/A	ISO 8662-8	81	92
54424	Steel Housing 4" Disc Sander 18,000 RPM Extended .7 hp	522	0.7	41	1161	18000	Under 2.5	0.7	ISO 28927-3	N/A	N/A	ISO 8662-8	80	91
54427	4" Disc Sander 12,000 RPM Steel Housing	522	0.7	39	1104	12000	Under 2.5	0.7	ISO 28927-3	N/A	N/A	ISO 8662-8	78	89
54430	Steel Housing 4" Disc Sander 12,000 RPM Extended .7 hp	522	0.7	40	1133	12000	Under 2.5	0.6	ISO 28927-3	N/A	N/A	ISO 8662-8	78	89
54730	Type 41 3" 18K Composite Cut-Off Wheel Tool	522	0.7	40	1133	18000	8.7	3	ISO 28727-3	N/A	N/A	N/A	83	94
54732	3" Type 41 Cut-Off Wheel Tool Composite housing Extended 18,000 RPM .7 hp	522	0.7	41	1161	18000	6.4	2.1	ISO 28727-3	N/A	N/A	N/A	82	93
54734	Type 41 4" 13.5K Composite Cut-Off Wheel Tool	522	0.7	39	1104	13500	14.3	4.7	ISO 28727-3	N/A	N/A	N/A	83	94
54736	4" Type 41 Cut-Off Wheel Tool Composite housing Extended 13,500 RPM .7 hp	522	0.7	41	1161	13500	9	3	ISO 28727-3	N/A	N/A	N/A	83	94
54740	Type 41 3" 18K Steel Cut-Off Wheel Tool	522	0.7	40	1133	18000	13.6	4.3	ISO 28727-3	N/A	N/A	N/A	82	93
54742	3" Type 41 Cut-Off Wheel Tool Steel housing Extended 18,000 RPM .7 hp	522	0.7	41	1161	18000	4.8	1.6	ISO 28727-3	N/A	N/A	N/A	79	90
54744	Type 41 4" 13.5K Steel Cut-Off Wheel Tool	522	0.7	39	1104	13500	3.7	1.2	ISO 28727-3	N/A	N/A	N/A	81	92
54746	4" Type 41 Cut-Off Wheel Tool Steel housing Extended 13,500 RPM .7 hp	522	0.7	41	1161	13500	3.7	1.2	ISO 28727-3	N/A	N/A	N/A	81	92
54767	Type 27 Composite 3" 18K Right Angle grinder	522	0.7	40	1133	18000	14.8	3.7	ISO 28727-3	N/A	N/A	N/A	81	92
54769	3" Type 27 Grinder Composite Housing Extended 18,000 RPM .7 hp	522	0.7	41	1161	18000	5.8	1.9	ISO 28727-3	N/A	N/A	N/A	82	93
54771	Type 27 Composite 4" 12 K Right Angle grinder	522	0.7	39	1104	12000	12	4	ISO 28727-3	N/A	N/A	N/A	83	94
54773	4" Type 27 Grinder Composite Housing Extended 12,000 RPM .7 hp	522	0.7	41	1161	12000	4.2	1.4	ISO 28727-3	N/A	N/A	N/A	81	92
54775	Type 27 Composite 4" 12 K Right Angle grinder	522	0.7	39	1104	13500	14.3	4.7	ISO 28727-3	N/A	N/A	N/A	83	94
54777	4" Type 27 Grinder Composite Housing Extended 13,500 RPM .7 hp	522	0.7	41	1161	13500	4.8	1.6	ISO 28727-3	N/A	N/A	N/A	80	91
54783	Type 27 Steel 3" 18 K Right Angle grinder	522	0.7	40	1133	18000	6.4	2.1	ISO 28727-3	N/A	N/A	N/A	80	91
54785	3" Type 27 Grinder Steel Housing Extended 18,000 RPM .7 hp	522	0.7	41	1161	18000	4.8	1.6	ISO 28727-3	N/A	N/A	N/A	80	91
54787	Type 27 Steel 4" 12 K Right Angle grinder	522	0.7	39	1104	12000	11.7	3.9	ISO 28727-3	N/A	N/A	N/A	83	94
54789	4" Type 27 Grinder Steel Housing Extended 12,000 RPM .7 hp	522	0.7	41	1161	12000	3.8	1.3	ISO 28727-3	N/A	N/A	N/A	79	90
54791	Type 27 Steel 4" 13.5 K Right Angle grinder	522	0.7	39	1104	13500	12.5	4.1	ISO 28727-3	N/A	N/A	N/A	84	95
54793	4" Type 27 Grinder Steel Housing Extended 13,500 RPM .7 hp	522	0.7	41	1161	13500	3.7	1.2	ISO 28727-3	N/A	N/A	N/A	80	91
55126	Dynabuffer Front Exhaust 12,000 RPM	373	0.5	37	1048	12000	Under 2.5	0.7	ISO 28927-3	Under 2.5	0.7	ISO 8662-8	79	90
56715	.4 hp Right Angle Vacuum Die Grinder 12,000 RPM	298	0.4	21	595	12000	AOR	N/A	ISO 28927-12	Under 2.5	0.8	ISO 8662-13	79	90
56719	.4 hp Right Angle Vacuum Die Grinder 20,000 RPM	298	0.4	21	595	20000	AOR	N/A	ISO 28927-12	Under 2.5	0.8	ISO 8662-13	79	90
56723	.4 hp 7° Offset Vacuum Die Grinder 25,000 RPM	298	0.4	24	680	25000	AOR	N/A	ISO 28927-12	Under 2.5	0.4	ISO 8662-13	78	89
56727	.4 hp 7° Offset Vacuum Die Grinder 5,000 RPM	298	0.4	25	708	5000	AOR	N/A	ISO 28927-12	Under 2.5	0.2	S1049	79	90
56739	.7 hp 7° Offset Vacuum Die Grinder 18,000 RPM	522	0.7	37	1048	18000	2.9	2	ISO 28927-12	Under 2.5	0.5	ISO 8662-13	81	92
56743	1 hp Straight Vacuum Die Grinder 12,000 RPM	746	1	37	1048	12000	Under 2.5	0.7	ISO 28927-12	Under 2.5	1.2	ISO 8662-13	77	88
56747	1 hp Straight Vacuum Die Grinder 20,000 RPM	746	1	37	1048	12000	Under 2.5	1.1	ISO 28927-12	Under 2.5	0.9	ISO 8662-13	83	94
56751	.4 hp Straight Vacuum Die Grinder 5,000 RPM	298	0.4	25	708	5000	AOR	N/A	ISO 28927-12	Under 2.5	0.3	S1049	81	92
56755	.4 hp Straight Vacuum Die Grinder 25,000 RPM	298	0.4	21	595	25000	AOR	N/A	ISO 28927-12	Under 2.5	0.8	ISO 8662-13	80	91
56759	.7 hp Straight Vacuum Die Grinder 15,000 RPM	522	0.7	35	991	15000	AOR	N/A	ISO 28927-12	Under 2.5	1.2	ISO 8662-13	82	93
56800	3-1/2" Non-Vacuum Dynorbital® Supreme Random Orbital Sander, 3/16" Orbit	209	0.28	18	510	12000	4.3	1.4	ISO 28927-3	Under 2.5	0.8	ISO 8662-8	79	90
56803	3-1/2" Vac-Ready Dynorbital® Supreme Random Orbital Sander, 3/16" Orbit	209	0.28	18	510	12000	5.1	4.6	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	84	95
56804	3-1/2" Central Vac-Ready Dynorbital® Supreme Random Orbital Sander, 3/16" Orbit	209	0.28	18	510	12000	4.8	1.1	ISO 28927-3	Under 2.5	0.9	ISO 8662-8	78	89
56815	5" Non-Vacuum Dynorbital® Supreme Random Orbital Sander, 3/16" Orbit	209	0.28	18	510	12000	3.6	0.9	ISO 28927-3	Under 2.5	0.9	ISO 8662-8	76	87
56818	5" Vac-Ready Dynorbital® Supreme Random Orbital Sander, 3/16" Orbit	209	0.28	18	510	12000	5.2	1	ISO 28927-3	Under 2.5	1.2	ISO 8662-8	82	93
56819	5" Central Vac-Ready Dynorbital® Supreme Random Orbital Sander, 3/16" Orbit	209	0.28	18	510	12000	5.7	1.3	ISO 28927-3	2.5	1.2	ISO 8662-8	80	91
56826	6" Non-Vacuum Dynorbital® Supreme Random Orbital Sander, 3/16" Orbit	209	0.28	18	510	12000	7.5	1.2	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	78	89
56829	6" Vac-Ready Dynorbital® Supreme Random Orbital Sander, 3/16" Orbit	209	0.28	18	510	12000	5.9	1.1	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	85	96
56830	6" Central Vac-Ready Dynorbital® Supreme Random Orbital Sander, 3/16" Orbit	209	0.28	18	510	12000	6.4	1.4	ISO 28927-3	Under 2.5	1.2	ISO 8662-8	81	92
56840	3-1/2" Non-Vacuum Dynorbital® Supreme Random Orbital Sander, 3/32" Orbit	209	0.28	18	510	12000	4.3	1	ISO 28927-3	Under 2.5	0.8	ISO 8662-8	76	87
56843	3-1/2" Vac-Ready Dynorbital® Supreme Random Orbital Sander, 3/32" Orbit	209	0.28	18	510	12000	4.2	0.9	ISO 28927-3	Under 2.5	0.9	ISO 8662-8	81	92
56844	3-1/2" Central Vac-Ready Dynorbital® Supreme Random Orbital Sander, 3/32" Orbit	209	0.28	18	510	12000	3.3	1.2	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	79	90
56850	5" Non-Vacuum Dynorbital® Supreme Random Orbital Sander, 3/32" Orbit	209	0.28	18	510	12000	4	1.4	ISO 28927-3	2.5	1.2	ISO 8662-8	78	89
56853	5" Vac-Ready Dynorbital® Supreme Random Orbital Sander, 3/32" Orbit	209	0.28	18	510	12000	3.3	0.9	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	83	94
56854	5" Central Vacuum Ready Dynorbital® Supreme Random Orbital Sander, 3/32" Orbit	209	0.28	18	510	12000	3.9	0.9	ISO 28927-3	2.5	1.3	ISO 8662-8	80	91
56859	6" Non-Vacuum Dynorbital® Supreme Random Orbital Sander, 3/32" Orbit	209	0.28	18	510	12000	3.6	0.9	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	76	87
56862	6" Vac-Ready Dynorbital® Supreme Random Orbital Sander, 3/32" Orbit	209	0.28	18	510	12000	3.2	1.2	ISO 28927-3	Under 2.5	0.9	ISO 8662-8	84	95
56863	6" Central Vac-Ready Dynorbital® Supreme Random Orbital Sander, 3/32" Orbit	209	0.28	18	510	12000	3.2	1	ISO 28927-3	Under 2.5	1.2	ISO 8662-8	79	90
56870	3-1/2" Non-Vacuum Dynorbital® Supreme Random Orbital Sander, 3/8" Orbit	209	0.28	18	510	12000	5.7	1.5	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	80	91
56873	3-1/2" Vac-Ready Dynorbital® Supreme Random Orbital Sander, 3/8" Orbit	209	0.28	18	510	12000	5.7	1.7	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	84	95
56874	3-1/2" Central Vac-Ready Dynorbital® Supreme Random Orbital Sander, 3/8" Orbit	209	0.28	18	510	12000	5.6	1.7	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	80	91
56880	5" Non-Vacuum Dynorbital® Supreme Random Orbital Sander, 3/8" Orbit	209	0.28	18	510	12000	5.3	1.4	ISO 28927-3	Under 2.5	1	ISO 8662-8	78	89
56883	5" Vac-Ready Dynorbital® Supreme Random Orbital Sander, 3/8" Orbit	209	0.28	18	510	12000	8.4	1.3	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	85	96
56884	5" Central Vacuum Ready Dynorbital® Supreme Random Orbital Sander, 3/8" Orbit	209	0.28	18	510	12000	10	3.5	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	81	92
56890	3-1/2" Non-Vacuum Dynorbital® Supreme Random Orbital Sander, 3/8" Orbit	209	0.28	18	510	12000	10	2.1	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	80	91
56893	3-1/2" Vac-Ready Dynorbital® Supreme Random Orbital Sander, 3/8" Orbit	209	0.28	18	510	12000	11.5	1.6	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	85	96
56894	6" Central Vac-Ready Dynorbital® Supreme Random Orbital Sander, 3/8" Orbit	209	0.28	18	510	12000	11	1.6	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	84	95
57126	3" Dynabuffer 3" Diameter .16 hp 10,000 RPM	119	0.16	20	566	10000	Under 2.5	0.5	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	71	82
57127	3" Depressed Center Wheel Grinder	410	0.55	18	510	15000	14.5	4.8	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	76	87
57400	Dynaline Sander (Non-Vac)	224	0.3	18	510	2400	4.6	1	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	79	90
57401	Dynaline Sander (Vac Ready)	224	0.3	18	510	2400	5.4	1.3	ISO 28927-3	3.1	1.6	ISO 8662-8	79	90
57404	Dynaline Sander (Central Vac Ready)	224	0.3	18	510	2400	5.3	1	ISO 28927-3	3.1	1.6	ISO 8662-8	80	91
57407	Dynaline Sander (Non-Vac w/clips)	224	0.3	18	510	2400	5	1	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	79	90
57500	Mini-Dynorbital® Random Orbital Sander	37	0.05	6	170	6000	4.5	1	ISO 28927-3	4.4	2.2	ISO 8662-8	69	80
57502	Mini-Dynorbital® Random Orbital Sander (Locking-Type Pad)	37	0.05	7	198	7500	5.8	1.1	ISO 28927-3	2.7	1.4	ISO 8662-8	75	86
57503	Mini-Dynorbital® Random Orbital Sander (Locking-Type Pad)	37	0.05	6	170	6000	5.2	1.3	ISO 28927-3	4.4	2.2	ISO 8662-8	69	80
57504	Mini-Dynorbital® Random Orbital Sander	37	0.05	6	198	6000	4.2	0.9	ISO 28927-3	N/A	N/A	ISO 8662-8	74	85
57550	3" Buffer .25 hp 2,400 RPM	186	0.25	18	510	2400	Under 2.5	0.8	ISO 28927-3	Under 2.5	0.9	ISO 8662-8	76	87
57571	3-1/2" Deluxe Wet Dynorbital® Supreme Random Orbital Sander	186	0.25	18	510	2400	3.8	1	ISO 28927-3	Under 2.5	0.6	ISO 8662-8	74	85
57572	5" Basic Wet Dynorbital® Supreme Random Orbital Sander	186	0.25	18	510	2400	4.4	0.9	ISO 28927-3	Under 2.5	1	ISO 8662-8	78	89
57573	5" Deluxe Wet Dynorbital® Supreme Random Orbital Sander	186	0.25	18	510	2400	4.4	0.9	ISO 28927-3	Under 2.5	1	ISO 8662-8	78	89
57574	6" Basic Wet Dynorbital® Supreme Random Orbital Sander	186	0.25	18	510	2400	10.5	1.6	ISO 28927-3	2.5	1.3	ISO 8662-8	76	87
57575	6" Deluxe Wet Dynorbital® Supreme Random Orbital Sander	186	0.25	18	510	2400	10.5	1.6	ISO 28927-3	2.5	1.3	ISO 8662-8	76	87
57582	5" Basic Wet Dynorbital®	186	0.25	18	510	2400	3.5	0.8	ISO 28927-3	2.9	1.5	ISO 8662-8	76	87
57583	5" Deluxe Wet Dynorbital®	186	0.25	18	510	2400	3.5	0.8	ISO 28927-3	2.9	1.5	ISO 8662-8	76	87
57584	6" Basic Wet Dynorbital®	186	0.25	18	510	2400	3.6	0.9	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	78	89
57585	6" Deluxe Wet Dynorbital®	186	0.25	18	510	2400	3.6	0.9	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	78	89
57800	Dynabug® 3/16" Orbit 8,000 RPM Non-Vac	179	0.24	16	453	8000	7.2	1.3	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	79	90
57801	Dynabug® 3/16" Orbit 8,000 RPM Self Generated Vac	179	0.24	16	453	8000	9.8	4.3	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	76	87
57804	Dynabug® 3/16" Orbit 8,000 RPM Central Vac	179	0.24	16	453	8000	9.1	3.7	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	80	91
57810	Dynabug® Orbital Sander (Non-Vac)	179	0.24	16	453	10000	5	1	ISO 28927-3	3.9	2	ISO 8662-8	77	88
57811	Dynabug® Orbital Sander (Vac-Ready)	179	0.24	16	453	10000	4.5	1.4	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	74	85
57814	Dynabug® Orbital Sander (Central Vac-Ready)	179	0.24	16	453	10000	5.2	1	ISO 28927-3	2.5	1.3	ISO 8662-8	81	92
57900	Dynafine® Sander	89	0.12	16	453	13000	Under 2.5	0.7	ISO 28927-3	N/A	0.7	ISO 8662-8	75	86
57906	Dynafine® w/Raised Panel Pad, 13K RPM	179	0.24	16	453	8000	11	4.7	ISO 28927-3	N/A	4.7	ISO 8662-8	75	86
57908	Wet “Model T” (5" Round)	179	0.24	16	453	8000	3.2	0.8	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	76	87
57909	Wet “Model T” (6" Round)	179	0.24	16	453	8000	3.2	0.8	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	76	87
57920	Dynabug® “Model T” 1/4-Sheet Finishing Sander Non-Vacuum	179	0.24	16	453	8000	3.1	0.8	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	70	81
57922	Dynabug® “Model T” Finishing Sander Non-Vacuum	179	0.24	16	453	8000	3	0.8	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	70	81
57923	Dynabug® “Model T” 1/4-Sheet Finishing Sander	179	0.24	16	453	8000	3.1	0.8	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	70	81
57924	Dynabug® “Model T” Finishing Sander	N/A	N/A	5	127	20000	3.2	0.8	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	70	81
57925	Dynabug® “Model T” 1/4-Sheet Finishing Sander Non-Vacuum	N/A	N/A	5	127	20000	3.1	0.8	ISO 28927-3	Under 2.5	1.3	ISO 28927-3	70	81
57926	Dynabug® “Model T” Finishing Sander Non-Vacuum	N/A	N/A	5	127	20000	2.7	0.8	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	70	81
57927	Dynabug® “Model T” Finishing Sander Non-Vacuum	N/A	N/A	5	127	20000	3.2	1.4	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	70	81
57928	Dynabug® “Model T” 1/4-Sheet Finishing Sander Central Vac-Ready	N/A	N/A	5	127	20000	4	0.9	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	73	84
57929	Dynabug® “Model T” 1/4-Sheet Finishing Sander Central Vac-Ready	N/A	N/A	5	127	20000	4.4	0.9	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	73	84
57930	Dynafine® Finger Finishing Sander	298	0.4	23	651	15000	7.9	1.5	ISO 28927-3	7.9	3.2	ISO 8662-8	77	88
58000	Dynafine® Backsplash Sander /W 58021 Pad	298	0.4	23	651	15000	8.8	1.4	ISO 28927-3	N/A	N/A	ISO 8662-8	78	89
58015	Self-Generated Vacuum Dynafine® Detail Sander	89	0.12	19	538	15000	Under 2.5	0.5	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	80	91
58017	Central Vacuum Dynafine® Detail Sander	89	0.12	19	538	15000	Under 2.5	1	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	83	94
58034	1-1/4" Mini-Orbital Roloc Sander, 12K RPM	298	0.4	21	595	12000	11	1.9	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	85	96
58035	1-1/4" Mini-Orbital Sander, 15,000 RPM	298	0.4	21	595	15000	6.1	1.1	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	79	90
58037	1-1/4" Mini-Orbital Sander, 12K RPM	298	0.4	21	595	12000	7.4	1.2	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	84	95
58038	1-1/4" Mini-Orbital Roloc Sander, 12K RPM	298	0.4	21	595	12000	11	2.9	ISO 28927-3	3.1	1.6	ISO 8662-8	84	95
58039	1-1/4" Mini-Orbital Sander, 12K RPM, Rear Exhaust	298	0.4	21	595	12000	8.4	1.4	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	75	86
58040	11" Non-Vacuum Two-Hand Gear-Driven Sander	336	0.45	28	793	10000	34	4.6	ISO 28927-3	12.5	5	ISO 8662-8	82	93
58041	11" Central Vacuum-Ready Two-Hand Gear-Driven Sander	336	0.45	28	793	10000	34	4.6	ISO 28927-3	12.5	5	ISO 8662-8	83	94
58050	Dynastraight® Rolling Pin Sander	298	0.4	27	765	3200	AOR	N/A	ISO 20643	3.5	1.8	S1049	77	88
58070	Dynabug® “Model T” 1/4-Sheet Finishing Sander (Self-Generated Vac)	N/A	N/A	5	127	20000	3.6	1.4	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	82	93
58075	Dynabug® “Model T” 1/4-Sheet Finishing Sander (Self-Generated Vac)	N/A	N/A	5	127	20000	3.4	1.6	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	82	93
58400	5" Non-Vacuum Two-Hand Dynorbital® Random Orbital Sander	336	0.45	20	566	12000	4.1	0.8	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	81	92
58401	5" Self-Generated Vac-Ready Two-Hand Dynorbital® Random Orbital Sander	336	0.45	20	566	12000	4.3	0.9	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	84	95
58405	6" Non-Vacuum Two-Hand Dynorbital® Random Orbital Sander	336	0.45	20	566	12000	5.5	1.8	ISO 28927-3	3.7	1.9	ISO 8662-8	82	93
58406	6" Self-Generated Vac-Ready Two-Hand Dynorbital® Random Orbital Sander	336	0.45	20	566	12000	8.9	1.8	ISO 28927-3	3.7	1.9	ISO 8662-8	84	95
58409	6" Central Vac-Ready Two-Hand Dynorbital® Random Orbital Sander	336	0.45	20	566	12000	6.1	1.3	ISO 28927-3	3.7	1.9	ISO 8662-8	84	95
58410	8" Non-Vacuum Two-Hand Dynorbital® Random Orbital Sander	336	0.45	14	396	10000	16	2.9	ISO 28927-3	5.8	2.3	ISO 8662-8	78	89
58411	8" Self-Generated Vac-Ready Two-Hand Dynorbital® Random Orbital Sander	336	0.45	14	396	10000	16	2.3	ISO 28927-3	5.8	2.3	ISO 8662-8	85	96
58414	8" Central Vac-Ready Two-Hand Dynorbital® Random Orbital Sander	336	0.45	14	396	10000	9.6	1.5	ISO 28927-3	5.8	2.3	ISO 8662-8	79	90
58415	5" Non-Vacuum Two-Hand Dynorbital® Random Orbital Sander	336	0.45	20	566	12000	8.1	1.3	ISO 28927-3	3	1.5	ISO 8662-8	84	95
58416	5" Self-Generated Vac-Ready Two-Hand Dynorbital® Random Orbital Sander	336	0.45	20	566	12000	9.9	1.5	ISO 28927-3	3	1.5	ISO 8662-8	84	95
58418	6" Non-Vacuum Two-Hand Dynorbital® Random Orbital Sander	336	0.45	23	651	12000	10.5	3.7	ISO 28927-3	3.6	1.8	ISO 8662-8	83	94
58419	6" Self-Generated Vac-Ready Two-Hand Dynorbital® Random Orbital Sander	336	0.45	23	651	12000	10.5	4.3	ISO 28927-3	3.6	1.8	ISO 8662-8	84	95
58420	6" Central Vac-Ready Two-Hand Dynorbital® Random Orbital Sander	336	0.45	23	651	12000	10.5	3.7	ISO 28927-3	3.6	1.8	ISO 8662-8	84	95
58430	5" Non-Vac DynaLocke® Random Dual Action Sander	336	0.45	23	651	12000	3	0.7	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	82	93
58430	5" Non-Vac DynaLocke® Rotary Dual Action Sander	336	0.45	23	651	12000	Under 2.5	0.7	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	86	97
58431	5" Self-Generated Vac-Ready DynaLocke® Random Dual Action Sander	336	0.45	23	651	12000	3.3	0.8	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	85	96
58431	5" Self-Generated Vac-Ready DynaLocke® Rotary Dual Action Sander	336	0.45	23	651	12000	Under 2.5	1.1	ISO 28927-3	2.7	1.4	ISO 8662-8	85	96
58435	6" Non-Vac DynaLocke® Random Dual Action Sander	336	0.45	23	651	12000	3.7	0.9	ISO 28927-3	3.7	1.8	ISO 8662-8	85	96
58435	6" Non-Vac DynaLocke® Rotary Dual Action Sander	336	0.45	23	651	12000	Under 2.5	0.7	ISO 28927-3	2.7	1.3	ISO 8662-8	85	96
58436	6" Self-Generated Vac-Ready DynaLocke® Random Dual Action Sander	336	0.45	23	651	12000	5.8	1.1	ISO 28927-3	3.7	1.8	ISO 8662-8	85	96
58436	6" Self-Generated Vac-Ready DynaLocke® Rotary Dual Action Sander	336	0.45	23	651	12000	Under 2.5	0.7	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	85	96
58441	5" Non-Vac Two-Hand Gear-Driven Orbital Sander	336	0.45	23	651	900	14.5	2	ISO 28927-3	4.7	2.3	ISO 8662-8	85	96
58442	6" Non-Vac Two-Hand Gear-Driven Orbital Sander	336	0.45	23	651	900	19	5.5	ISO 28927-3	4.6	2.3	ISO 8662-8	85	96
58443	6" Central Vac-Ready Two-Hand Gear-Driven Orbital Sander (6 Holes)	336	0.45	23	651	900	7.1	2.4	ISO 28927-3	4.6	2.3	ISO 8662-8	83	94
58444	6" Central Vac-Ready Two-Hand Gear-Driven Orbital Sander (8 Holes)	336	0.45	23	651	900	7.6	1.3	ISO 28927-3	4.6	2.3	ISO 8662-8	83	94
58445	8" Non-Vac Two-Hand Gear-Driven Orbital Sander	336	0.45	23	651	900	15	3.9	ISO 28927-3	5.8	2.3	ISO 8662-8	76	87
58446	8" Central Vac-Ready Two-Hand Gear-Driven Orbital Sander	336	0.45	23	651	900	12	2.9	ISO 28927-3	5.8	2.3	ISO 8662-8	76	87
58455	5" Dynabuffer w/Hanger Bracket	224	0.3	23	651	10000	7.1	3.2	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	78	89
58460	3" Non-Vac DynaLocke® Dual Action Sander (Rotary)	336	0.45	23	651	12000	3	1.6	ISO 28927-3	Under 2.5	0.3	ISO 8662-8	81	92
58460	3" Non-Vac DynaLocke® Dual Action Sander (Random)	336	0.45	23	651	12000	Under 2.5	0.6	ISO 28927-3	Under 2.5	0.6	ISO 8662-8	81	92
58461	3" Vac-Ready DynaLocke® Dual Action Sander (Rotary)	336	0.45	23	651	12000	3	1.6	ISO 28927-3	Under 2.5	0.3	ISO 8662-8	89	100
58461	3" Vac-Ready DynaLocke® Dual Action Sander (Random)	336	0.45	23	651	12000	Under 2.5	0.6	ISO 28927-3	Under 2.5	0.6	ISO 8662-8	86	97
58465	3-1/2"Non-Vac DynaLocke® Dual Action Sander (Rotary)	336	0.45	23	651	12000	7.7	5.4	ISO 28927-3	Under 2.5	0.8	ISO 8662-8	80	91
58465	3-1/2"Non-Vac DynaLocke® Dual Action Sander (Random)	336	0.45	23	651	12000	8.2	1.5	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	80	91
58466	3-1/2" Vac-Ready DynaLocke® Dual Action Sander (Rotary)	336	0.45	23	651	12000	7.7	1.8	ISO 28927-3	Under 2.5	0.8	ISO 8662-8	88	99
58466	3-1/2" Vac-Ready DynaLocke® Dual Action Sander (Random)	336	0.45	23	651	12000	8.2	1.5	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	88	99
58480	11" Non-Vacuum Two-Hand Dynorbital® Random Orbital Sander	336	0.45	23	651	12000	10.5	7.6	ISO 28927-3	Under 2.5	0.8	ISO 8662-8	83	94
58485	11" Central Vacuum-Ready Two-Hand Dynorbital® Random Orbital Sander	336	0.45	23	651	12000	10.5	5.6	ISO 28927-3	Under 2.5	0.8	ISO 8662-8	88	99
58500	Dynabug® II, Non-Vacuum	112	0.15	13	368	10000	4.6	1	ISO 28927-3	2.5	0.9	ISO 8662-8	77	88
58501	Dynabug® II Self Generated Vacuum Ready	112	0.15	13	368	10000	5	1	ISO 28927-3	Under 2.5	0.9	ISO 8662-8	79	90
58502	Dynabug® II, Vacuum Ready 74 mm x 109 mm	112	0.15	13	368	10000	3.8	0.9	ISO 28927-3	Under 2.5	0.9	ISO 8662-8	77	88
58503	Dynabug® II, Non-Vacuum	112	0.15	13	368	10000	5.4	1	ISO 28927-3	Under 2.5	0.8	ISO 8662-8	77	88
58504	Dynabug® II, Self Generated Vacuum Ready	112	0.15	13	368	10000	3.3	0.8	ISO 28927-3	Under 2.5	0.8	ISO 8662-8	79	90
58505	Dynabug® II, Vacuum Ready	112	0.15	13	368	10000	3.3	0.8	ISO 28927-3	Under 2.5	0.8	ISO 8662-8	77	88
58506	Dynabug® II Vacuum Ready	112	0.15	13	368	10000	3.1	1.5	ISO 28927-3	Under 2.5	0.6	ISO 8662-8	77	88
58507	Dynabug® II, Clips, Non-Vac, Industrial	112	0.15	13	368	10000	3.5	0.8	ISO 28927-3	<25	0.8	ISO 8662-8	76	87
58509	Dynabug® II, Non-Vacuum	112	0.15	13	368	10000	5.3	1.4	ISO 28927-3	N/A	N/A	ISO 8662-8	78	89
59000	3-1/2" Non-Vacuum Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	15.5	2	ISO 28927-3	Under 2.5	1	ISO 8662-8	71	82
59003	3-1/2" Self-Generated Vac-Ready Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	10.5	1.6	ISO 28927-3	Under 2.5	1	ISO 8662-8	77	88
59004	3-1/2" Central Vac-Ready Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	12	1.7	ISO 28927-3	Under 2.5	1	ISO 8662-8	77	88
59005	5" Non-Vacuum Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	12.5	1.7	ISO 28927-3	Under 2.5	1.2	ISO 8662-8	73	84
59008	5" Self-Generated Vac-Ready Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	13.5	1.8	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	76	87
59009	5" Central Vac-Ready Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	13.5	3.1	ISO 28927-3	Under 2.5	1	ISO 8662-8	77	88
59010	6" Non-Vacuum Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	14	5.1	ISO 28927-3	Under 2.5	0.1	ISO 8662-8	74	85
59013	6" Self-Generated Vac-Ready Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	13.5	1.9	ISO 28927-3	2.5	1.2	ISO 8662-8	79	90
59014	6" Central Vac-Ready Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	11.5	3.4	ISO 28927-3	Under 2.5	1	ISO 8662-8	79	90
59015	3-1/2" Non-Vacuum Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	5.1	1	ISO 28927-3	Under 2.5	0.7	ISO 8662-8	72	83
59018	3-1/2" Self-Generated Vac-Ready Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	4	1.9	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	78	89
59019	3-1/2" Central Vac-Ready Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	3.9	0.9	ISO 28927-3	Under 2.5	0.7	ISO 8662-8	76	87
59020	5" Non-Vacuum Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	3.9	0.9	ISO 28927-3	Under 2.5	1.2	ISO 8662-8	72	83
59023	5" Self-Generated Vac-Ready Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	4.6	1.4	ISO 28927-3	Under 2.5	0.5	ISO 8662-8	76	87
59024	5" Central Vac-Ready Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	4.7	1	ISO 28927-3	Under 2.5	0.7	ISO 8662-8	75	86
59025	6" Non-Vacuum Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	4.5	1.7	ISO 28927-3	Under 2.5	1	ISO 8662-8	73	84
59028	6" Self-Generated Vac-Ready Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	4.4	1	ISO 28927-3	<25	0.8	ISO 8662-8	77	88
59029	6" Central Vac-Ready Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	5.1	1.7	ISO 28927-3	Under 2.5	1	ISO 8662-8	77	88
59030	3-1/2" Non-Vacuum Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	2.9	1.5	ISO 28927-3	Under 2.5	0.8	ISO 8662-8	70	81
59033	3-1/2" Self-Generated Vac-Ready Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	Under 2.5	1.1	ISO 28927-3	Under 2.5	0.7	ISO 8662-8	76	87
59034	3-1/2" Central Vac-Ready Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	2.9	0.8	ISO 28927-3	Under 2.5	0.8	ISO 8662-8	76	87
59035	5" Non-Vacuum Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	4	0.9	ISO 28927-3	Under 2.5	0.8	ISO 8662-8	74	85
59038	5" Self-Generated Vac-Ready Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	4.8	1	ISO 28927-3	Under 2.5	1	ISO 8662-8	75	86
59039	5" Central Vac-Ready Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	5	1	ISO 28927-3	Under 2.5	0.9	ISO 8662-8	76	87
59040	6" Non-Vacuum Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	6.5	1.1	ISO 28927-3	Under 2.5	0.7	ISO 8662-8	70	81
59043	6" Self-Generated Vac-Ready Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	5.8	2.4	ISO 28927-3	Under 2.5	0.5	ISO 8662-8	77	88
59044	6" Central Vac-Ready Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	6.3	2.6	ISO 28927-3	Under 2.5	0.7	ISO 8662-8	74	85
59100	3" Non-Vacuum Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	5.4	1	ISO 28927-3	Under 2.5	0.8	ISO 8662-8	70	81
59103	3" Self-Generated Vac-Ready Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	6.1	2.8	ISO 28927-3	Under 2.5	0.8	ISO 8662-8	76	87
59104	3" Central Vac-Ready Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	6.8	1.2	ISO 28927-3	Under 2.5	0.8	ISO 8662-8	75	86
59105	3" Non-Vacuum Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	2.5	0.8	ISO 28927-3	Under 2.5	0.8	ISO 8662-8	72	83
59108	3" Self-Generated Vac-Ready Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	3	1	ISO 28927-3	Under 2.5	1	ISO 8662-8	76	87
59109	3" Central Vac-Ready Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	2.5	0.7	ISO 28927-3	Under 2.5	0.8	ISO 8662-8	77	88
59110	3" Non-Vacuum Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	2.9	0.8	ISO 28927-3	Under 2.5	0.5	ISO 8662-8	70	81
59113	3" Self-Generated Vac-Ready Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	3.9	1.2	ISO 28927-3	Under 2.5	0.6	ISO 8662-8	77	88
59114	3" Central Vac-Ready Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	3.1	0.8	ISO 28927-3	Under 2.5	0.5	ISO 8662-8	76	87
59115	3" HiVac Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	3.9	0.9	ISO 28927-3	Under 2.5	1	ISO 8662-8	81	92
59116	3" HiVac Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	3.9	0.5	ISO 28927-3	Under 2.5	0.5	ISO 8662-8	81	92
59117	3" HiVac Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	3.9	0.9	ISO 28927-3	Under 2.5	0.9	ISO 8662-8	84	95
59118	3" HiVac Dynorbital-Spirit® Random Orbital Sander	186	0.25	14	396	12000	3.9	0.8	ISO 28927-3	Under 2.5	0.5	ISO 8662-8	84	95
60051	60,000 RPM Turbine Quick-Change Pencil Grinder	75	0.1	8	227	60000	Under 2.5	0.9	ISO 28927-12	Under 2.5	0.7	ISO 8662-13	78	89
60052	35,000 RPM Turbine Quick-Change Pencil Grinder	75	0.1	8	227	35000	Under 2.5	0.5	ISO 28927-12	Under 2.5	1.1	ISO 8662-13	65	76
69000	3-1/2" Non-Vacuum Dynorbital® Silver Supreme Random Orbital Sander	194	0.26	16	453	12000	11.6	1.7	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	78	89
69003	3-1/2"Self-Generated Vac-Ready Dynorbital® Silver Supreme Random Orbital Sander	194	0.26	16	453	12000	11.5	2.1	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	80	91
69004	3-1/2" Central Vac-Ready Dynorbital® Silver Supreme Random Orbital Sander	194	0.26	16	453	12000	8.7	1.6	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	79	90
69005	5" Non-Vacuum Dynorbital® Silver Supreme Random Orbital Sander	194	0.26	16	453	12000	10	1.5	ISO 28927-3	Under 2.5	1	ISO 8662-8	80	91
69008	5" Self-Generated Vac-Ready Dynorbital® Silver Supreme Random Orbital Sander	194	0.26	16	453	12000	10.3	1.5	ISO 28927-3	Under 2.5	0.9	ISO 8662-8	80	91
69009	5" Central Vac-Ready Dynorbital® Silver Supreme Random Orbital Sander	194	0.26	16	453	12000	3.6	0.9	ISO 28927-3	Under 2.5	1	ISO 8662-8	80	91
69010	6" Non-Vacuum Dynorbital® Silver Supreme Random Orbital Sander	194	0.26	16	453	12000	14.7	4.2	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	83	94
69013	6" Self-Generated Vac-Ready Dynorbital® Silver Supreme Random Orbital Sander	194	0.26	16	453	12000	5.2	1.2	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	80	91
69014	6" Central Vac-Ready Dynorbital® Silver Supreme Random Orbital Sander	194	0.26	16	453	12000	7.8	1.3	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	84	95
69015	3-1/2" Non-Vacuum Dynorbital® Silver Supreme Random Orbital Sander	194	0.26	16	453	12000	4.1	1	ISO 28927-3	Under 2.5	1	ISO 8662-8	76	87
69018	3-1/2" Self-Generated Vac-Ready Dynorbital® Silver Supreme Random Orbital Sander	194	0.26	16	453	12000	4.2	0.9	ISO 28927-3	Under 2.5	1	ISO 8662-8	79	90
69019	3-1/2" Central Vac-Ready Dynorbital® Silver Supreme Random Orbital Sander	194	0.26	16	453	12000	3.8	0.9	ISO 28927-3	Under 2.5	1	ISO 8662-8	83	94
69020	5" Non-Vacuum Dynorbital® Silver Supreme Random Orbital Sander	194	0.26	16	453	12000	3.6	1	ISO 28927-3	Under 2.5	0.8	ISO 8662-8	77	88
69023	5" Self-Generated Vac-Ready Dynorbital® Silver Supreme Random Orbital Sander	194	0.26	16	453	12000	3.6	0.9	ISO 28927-3	Under 2.5	0.6	ISO 8662-8	81	92
69024	5" Central Vac-Ready Dynorbital® Silver Supreme Random Orbital Sander	194	0.26	16	453	12000	4.8	1.5	ISO 28927-3	Under 2.5	1.3	ISO 8662-8	79	90
69025	6" Non-Vacuum Dynorbital® Silver Supreme Random Orbital Sander	194	0.26	16	453	12000	4.9	1.5	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	77	88
69028	6" Self-Generated Vac-Ready Dynorbital® Silver Supreme Random Orbital Sander	194	0.26	16	453	12000	4.1	0.9	ISO 28927-3	Under 2.5	1	ISO 8662-8	84	95
69029	6" Central Vac-Ready Dynorbital® Silver Supreme Random Orbital Sander	194	0.26	16	453	12000	4.8	1.3	ISO 28927-3	Under 2.5	1.1	ISO 8662-8	83	94
69030	3-1/2" Non-Vacuum Dynorbita®l-Silver SupremeRandom Orbital Sander	194	0.26	16	453	12000	3.2	1.4	ISO 28927-3	Under 2.5	0.6	ISO 8662-8	75	86
69033	3-1/2" Self-Generated Vac-Ready Dynorbital® Silver Supreme Random Orbital Sander	194	0.26	16	453	12000	2.9	0.9	ISO 28927-3	Under 2.5	0.7	ISO 8662-8	84	95
69034	3-1/2" Central Vac-Ready Dynorbital® Silver Supreme Random Orbital Sander	194	0.26	16	453	12000	3.5	0.8	ISO 28927-3	Under 2.5	0.6	ISO 8662-8	82	93
69035	5" Non-Vacuum Dynorbital® Silver Supreme Random Orbital Sander	194	0.26	16	453	12000	3.9	1.1	ISO 28927-3	Under 2.5	0.8	ISO 8662-8	78	89
69038	5" Self-Generated Vac-Ready Dynorbital® Silver Supreme Random Orbital Sander	194	0.26	16	453	12000	3.9	0.9	ISO 28927-3	Under 2.5	0.8	ISO 8662-8	84	95
69039	5" Central Vac-Ready Dynorbital® Silver Supreme Random Orbital Sander	194	0.26	16	453	12000	3.7	0.9	ISO 28927-3	Under 2.5	0.8	ISO 8662-8	81	92
69040	6" Non-Vacuum Dynorbital® Silver Supreme Random Orbital Sander	194	0.26	16	453	12000	5.1	1.3	ISO 28927-3	Under 2.5	0.6	ISO 8662-8	78	89
69043	6" Self-Generated Vac-Ready Dynorbital® Silver Supreme Random Orbital Sander	194	0.26	16	453	12000	4.1	0.9	ISO 28927-3	Under 2.5	0.7	ISO 8662-8	81	92
69044	6" Central Vac-Ready Dynorbital® Silver Supreme Random Orbital Sander	194	0.26	16	453	12000	5.2	1	ISO 28927-3	Under 2.5	0.6	ISO 8662-8	82	93
69060	6" Non-Vacuum Dynorbital® Silver Supreme Random Orbital Sander 54327 Pad	194	0.26	16	453	12000	7.8	1.3	ISO 28927-3	N/A	N/A	ISO 8662-8	83	94
69061	6" Non-Vacuum Dynorbital® Silver Supreme Random Orbital Sander 54327 Pad	194	0.26	16	453	12000	3.7	0.9	ISO 28927-3	N/A	N/A	ISO 8662-8	77	88
69062	6" Non-Vacuum Dynorbital® Silver Supreme Random Orbital Sander 54327 Pad	194	0.26	16	453	12000	4.1	0.9	ISO 28927-3	N/A	N/A	ISO 8662-8	78	89
69100	3" Non-Vacuum Dynorbital® Silver Supreme Random Orbital Sander	194	0.26	16	453	12000	8.8	1.4	ISO 28927-3	Under 2.5	1	ISO 8662-8	80	91
69103	3" Self-Generated Vac-Ready Dynorbital® Silver Supreme Random Orbital Sander	194	0.26	16	453	12000	10	1.5	ISO 28927-3	Under 2.5	0.5	ISO 8662-8	81	92
69104	3" Central Vac-Ready Dynorbital® Silver Supreme Random Orbital Sander	194	0.26	16	453	12000	10	1.5	ISO 28927-3	Under 2.5	1	ISO 8662-8	82	93
69105	3" Non-Vacuum Dynorbital® Silver Supreme Random Orbital Sander	194	0.26	16	453	12000	3.2	0.8	ISO 28927-3	Under 2.5	1	ISO 8662-8	80	91
69108	3" Self-Generated Vac-Ready Dynorbital® Silver Supreme Random Orbital Sander	194	0.26	16	453	12000	3.5	1.3	ISO 28927-3	Under 2.5	1	ISO 8662-8	79	90
69109	3" Central Vac-Ready Dynorbital® Silver Supreme Random Orbital Sander	194	0.26	16	453	12000	3.4	2.1	ISO 28927-3	Under 2.5	1	ISO 8662-8	80	91
69110	3" Non-Vacuum Dynorbital® Silver Supreme Random Orbital Sander	194	0.26	16	453	12000	2.9	0.8	ISO 28927-3	Under 2.5	0.8	ISO 8662-8	80	91
69113	3" Self-Generated Vac-Ready Dynorbital® Silver Supreme Random Orbital Sander	194	0.26	16	453	12000	2.6	0.8	ISO 28927-3	Under 2.5	0.8	ISO 8662-8	83	94
69114	3" Central Vac-Ready Dynorbital® Silver Supreme Random Orbital Sander	194	0.26	16	453	12000	2.6	0.8	ISO 28927-3	Under 2.5	0.8	ISO 8662-8	82	93
69500	Palm-Style Mini-Dynorbital® Silver Supreme Random Orbital Sander, 5,000 RPM	22	0.03	5	142	5000	5.8	1.1	ISO 28927-3	N/A	N/A	ISO 8662-8	70	81
69502	Palm-Style Mini-Dynorbital® Silver Supreme Random Orbital Sander, 7,500 RPM	60	0.08	5	142	7500	Under 2.5	1	ISO 28927-3	N/A	N/A	ISO 8662-8	75	86
69503	Palm-Style Mini-Dynorbital® Silver Supreme Random Orbital Sander, 5,000 RPM	22	0.03	5	142	5000	3.8	0.9	ISO 28927-3	N/A	N/A	ISO 8662-8	70	81
69504	Palm-Style Mini-Dynorbital® Silver Supreme Random Orbital Sander, 7,500 RPM	60	0.08	23	651	7500	8.4	1.3	ISO 28927-3	N/A	N/A	ISO 8662-8	75	86
69540	3" Sander/Buffer .2 hp 12,000 RPM	149	0.2	12	340	12000	Under 2.5	0.7	ISO 28927-3	N/A	N/A	N/A	74	85

Aerospace

Wind Energy

Automotive

Woodworking

Marine

Metalworking

Dynafile I

Electric Dynafile II

Dynangles

Dynafile II

Mini-Dynafile II

Take-About Sander

Low-Profile Dynafile II

Dynafile III

Pipe Belt Finisher

Vacuum Dynafile II

Dynabelters

Contact Arms

0.7hp Dynastraights

Dynastraight Flappers

DynaCushion Wheels

1hp Dynastraights

Dynishers

6″ Extension Dynastraights

Dyningers

Lightweight Dynastraights

Rolling Pin Sander

.4hp Straight-Line Die Grinders

.5hp Straight-Line Die Grinders

.7hp Right Angle Die Grinders

.4hp Right Angle Die Grinders

.5hp 7 Degree Offset Die Grinders

.7hp 7 Degree Offset Die Grinders

.4hp 7 Degree Offset Die Grinders

.55hp Right Angle Die Grinder

1hp Straight-Line Die Grinders

.4hp Angle-Head Die Grinders

.7hp Straight-Line Die Grinders

Central Vacuum Die Grinders

Rotary Vane Pencil Grinders

Turbine-Driven Pencil Grinders

Central Vacuum Pencil Grinders

2″ Dia. Right Angle Disc Sanders

4″ Dia. Right Angle Disc Sanders

7″ Dia. Right Angle Disc Sanders

2″ Dia. 7 Degree Offset Disc Sanders

4-1/2″ – 5″ Dia. Right Angle Disc Sanders

7″ Dia. Vertical Disc Sanders

3″ Dia. Right Angle Disc Sanders

4″ – 5″ Pistol Grip Disc Sanders

Self-Generated Vacuum Disc Sanders

3″ Dia. 7 Degree Offset Disc Sanders

5″ Dia. Vertical Disc Sanders

Central Vacuum Disc Sanders

2″ Dia. Angle Grinders

7″-9″ Dia. Angle Grinders

3″ Dia. Angle Grinders

Straight-Line Wheel Grinders

4″ Dia. Angle Grinders

Cup Wheel Grinders

4-1/2″ – 5″ Dia. Angle Grinders

Cone/Plug Wheel Grinders

3″ Cut-Off Wheel Tools

4″ Dia. Cut-Off Wheel Tools

3″ Dia. Vacuum Cut-Off Wheel Tools

4-1/2″ – 5″ Dia. Vacuum Cut Off Wheel Tools

“Two-Step” System Tools

Straight-Line Buffers

Dynabuffers

5″ – 8″ Dia. Buffers

.4hp 3″ Dia. Buffers

6″ – 8″ Dia. Buffers

.2hp / .25hp 3″ Dia. Buffers

.4hp / .5hp Drills

Reciprocating Filers, Sanders & Saws

.7hp / 1hp Drills

Routers

Central Vacuum Drills

Dynascalers

Dynapen Reciprocating Tools