01273 468736

DynaShop Owned and Operated by SAIC

ON-SITE TOOL DEMONSTRATIONS
Specialist advice to reduce your process times and improve efficiency, with the aim of saving you time & money.
BOOK SITE VISIT ›
FREE DELIVERY
For Orders £100+
TOOL SERVICING & REPAIRS
Send us your air tools for servicing to get them back up and running as good as new, with free advice on preventative maintenance.
BOOK TOOL REPAIR ›

Dynabrade 58040 11″ (279mm) Dia. Two-Hand Gear-Driven Sander, Non-Vacuum

MRP: £845.64

£674.57 +VAT

Go to Parts Manual

Dynabrade 58040 11″ (279mm) Dia. Two-Hand Gear-Driven Sander, Non-Vacuum


FINANCE OPTIONS AVAILABLE

PAY FROM £18.63 PER MONTH

Description

Product Description of Dynabrade 58040 11" (279mm) Dia. Two-Hand Gear-Driven Sander, Non-Vacuum

• Powerful .45 hp air motor runs at 900 RPM, for aggressive material removal.
• Extra-large 11" diameter sanding area allows operator to cover more area in less time, leveling substrates and removing filler material with ease and efficiency. Useful for manufacturers of large transportation, emergency vehicles, solid surface fabricators, swimming pool manufacturers, marine original equipment manufacturers, marine repair facilities and more.
• Unique epicycloidal pad motion generates torque-enhanced power, for consistent material removal. Tool features long handle design for easy two-handed control. Operator comfort is enhanced, especially when working in vertical positions. Includes weight-mated sanding pad for reduced vibration levels
• Speed control lever is conveniently located for easy thumb adjustment. Insulated tool housing reduces cold air transmission to the hand. Safety-lock throttle lever prevents accidental start-up of tool.
• For use with non-vacuum abrasive discs. Includes 56231 Hook-Face Sanding Pad, for abrasive discs 11-1/4" (286 mm) in diameter.

The Dynabrade 58040 11" (279mm) Dia. Two-Hand Gear-Driven Sander, Non-Vacuum has a Refined Ergonomic Tool Grip that allows for a more comfortable grip and feel, reducing operator fatigue and increasing efficiency. Perfectly-balanced, weight-mated sanding pad with exclusive single-piece hub design. Dynabrade premium urethane pads offer smoother operating performance and minimal vibration. To read our guide on choosing the correct Dynorbital please click here.



Parts Manuals for the Dynabrade 58040 11" (279mm) Dia. Two-Hand Gear-Driven Sander, Non-Vacuum

Find the five digit number for your part(s) in the parts manual below, and click the link to open a new tab where you can add it to your basket. Please note that depending on the age of your tool this may not be the correct parts manual - it should however state the range of serial numbers to which it applies at the top left/right of the first page.

Current Manual

Tune-Up Kit

Book a Dynabrade Repair

If you would like to book a repair for the Dynabrade 58040 11" (279mm) Dia. Two-Hand Gear-Driven Sander, Non-Vacuum please use the form below. You will then receive an email - simply place a copy of this email in the box with your tool and send it to the address stated in the email.

Vibration & Sound Readings for the Dynabrade 58040 11" (279mm) Dia. Two-Hand Gear-Driven Sander, Non-Vacuum

Please note – The vibration readings provided for the Dynabrade 58040 11" (279mm) Dia. Two-Hand Gear-Driven Sander, Non-Vacuum are based on laboratory results in very specific sets of conditions. Vibration levels are dependent on a number of factors that include, among many others; the abrasive being used, the job in hand and operator experience. DynaShop or Dynabrade cannot be held responsible for the consequences of using the listed values for risk assessment, rather than real-world values measured in your own specific application.

Vibration Level EN1296 (m/sec²)Uncertainty EN1296 (m/sec²)Vibration Test Method
12.55ISO 8662-8

Sound Pressure (dBA)Sound Power (dBA)
8293

Would you like this data in an email?

Simply fill out the form below and the vibration data for the Dynabrade 58040 11" (279mm) Dia. Two-Hand Gear-Driven Sander, Non-Vacuum will be sent to your email automatically.

On-Site Tool Demonstrations of the Dynabrade 58040 11" (279mm) Dia. Two-Hand Gear-Driven Sander, Non-Vacuum

Please complete the form below to arrange a tool demonstration for the Dynabrade 58040 11" (279mm) Dia. Two-Hand Gear-Driven Sander, Non-Vacuum or any of the Dynabrade range of tooling. Alternatively please call us on 01273 468736.

Book a Tool Demonstration

    For our privacy policy please click here.

Video of the Dynabrade 58040 11" (279mm) Dia. Two-Hand Gear-Driven Sander, Non-Vacuum

Additional information

Model Number

58040

Tool Type

Air Inlet Thread

1/4" NPT

Vacuum Type

Max. RPM

Exhaust Type

Power HP (W)

Consumable Shape

Consumable Size

Pad Hole Pattern

Pad Fixing Type

Item Weight (kgs)

Packaged Weight (kgs)

Other Specifications

, , , , , ,

Vibration Level (m/sec²)

Uncertainty

Vibration Method

Sound Pressure (dBA)

Sound Power (dBA)