Description
Product Description of Dynabrade 53300 6" (152mm) Dia. Horizontal Type 1 Wheel Grinder (Discontinued)
• For fast weld and stock removal, rust and scale removal, cleaning metal and more. Essential tools for metal fabrication, foundries, steel mills, shipyards and oil refineries!
• Governor-controlled air motor maintains speed under heavy load. Side exhaust. Gearless motor design for reduced downtime and increased efficiency.
• 5/8"-11 male spindle, with safety retaining collar and screw to retain flange. Wheel flanges and guards meet ANSI B7.1 and ISO 11148 safety standards.
• Safety-lock throttle lever prevents accidental start-up of tool. Model includes convenient Hanger Bracket, Hex Key and Open-End Wrench.
• Model includes Norton NorZon III Type 1 Reinforced Grinding Wheel (no. 66252837965). Wheel is 6" O.D. x 1" wide with 5/8" center hole.
The Dynabrade 53300 6" (152mm) Dia. Horizontal Type 1 Wheel Grinder (Discontinued) is a Dynabrade tool within the Grinder category of tooling range. Type 1 Wheels of 152mm can be used which can also be supplied by DynaShop. A Non-Vacuum tool with a maximum RPM of 6000, a power rating (hp/W) of 3.0 (2,237) with a weight of 6.99kg.
Parts Manuals for the Dynabrade 53300 6" (152mm) Dia. Horizontal Type 1 Wheel Grinder (Discontinued)
Find the five digit number for your part(s) in the parts manual below, and click the link to open a new tab where you can add it to your basket. Please note that depending on the age of your tool this may not be the correct parts manual - it should however state the range of serial numbers to which it applies at the top left/right of the first page.
Current Manual
Tune-Up Kit
Book a Dynabrade Repair
Vibration & Sound Readings for the Dynabrade 53300 6" (152mm) Dia. Horizontal Type 1 Wheel Grinder (Discontinued)
Please note – The vibration readings provided for the Dynabrade 53300 6" (152mm) Dia. Horizontal Type 1 Wheel Grinder (Discontinued) are based on laboratory results in very specific sets of conditions. Vibration levels are dependent on a number of factors that include, among many others; the abrasive being used, the job in hand and operator experience. DynaShop or Dynabrade cannot be held responsible for the consequences of using the listed values for risk assessment, rather than real-world values measured in your own specific application.
| Vibration Level EN1296 (m/sec²) | Uncertainty EN1296 (m/sec²) | Vibration Test Method |
| N/A | N/A | N/A |
| Sound Pressure (dBA) | Sound Power (dBA) |
| 88 | 99 |
Would you like this data in an email?
Simply fill out the form below and the vibration data for the Dynabrade 53300 6" (152mm) Dia. Horizontal Type 1 Wheel Grinder (Discontinued) will be sent to your email automatically.
On-Site Tool Demonstrations of the Dynabrade 53300 6" (152mm) Dia. Horizontal Type 1 Wheel Grinder (Discontinued)
Please complete the form below to arrange a tool demonstration for the Dynabrade 53300 6" (152mm) Dia. Horizontal Type 1 Wheel Grinder (Discontinued) or any of the Dynabrade range of tooling. Alternatively please call us on 01273 468736.
