Product Description of Dynabrade 52223 .5 HP 7 Degree Offset Die Grinder
• Includes 1/4" Collet Insert (50013), fits optional 1/8" (50065), 3/8" (50014), 6 mm (50016), 8 mm (50039)
• Gearless for reduced maintenance and downtime.
• Extended rear exhaust muffler design.
The Dynabrade 52223 .5 HP 7 Degree Offset Die Grinder is a Dynabrade tool within the Die Grinder category of tooling range. Spindles of can be used which can also be supplied by DynaShop. A Non-Vacuum tool with a maximum RPM of 24000, a power rating (hp/W) of 0.5 (373) with a weight of 0.95kg.
Parts Manuals for the Dynabrade 52223 .5 HP 7 Degree Offset Die Grinder
Find the five digit number for your part(s) in the parts manual below, and click the link to open a new tab where you can add it to your basket. Please note that depending on the age of your tool this may not be the correct parts manual - it should however state the range of serial numbers to which it applies at the top left/right of the first page.
Current Manual
Tune-Up Kit
Book a Dynabrade Repair
Vibration & Sound Readings for the Dynabrade 52223 .5 HP 7 Degree Offset Die Grinder
Important Notice:
The vibration and sound readings provided for the Dynabrade 52223 .5 HP 7 Degree Offset Die Grinder are based on laboratory testing carried out under controlled conditions.
Actual levels in use can vary significantly depending on factors such as the abrasive material, application, tool maintenance, and operator technique.
These figures should therefore be used as a guideline only. DynaShop and Dynabrade accept no liability for any decisions or assessments made using the listed data instead of measurements taken under your specific operating conditions.
| Vibration Level EN1296 (m/s²) | Uncertainty EN1296 (m/s²) | Vibration Test Method |
|---|---|---|
| Under 2.5 | 0.9 | ISO 8662-13 |
| Sound Pressure (dBA) | Sound Power (dBA) |
|---|---|
| 77 | 88 |
Would you like this data emailed to you?
Fill out the form below and we’ll send the vibration and sound data for the Dynabrade 52223 .5 HP 7 Degree Offset Die Grinder directly to your inbox.
On-Site Tool Demonstrations of the Dynabrade 52223 .5 HP 7 Degree Offset Die Grinder
Please complete the form below to arrange a tool demonstration for the Dynabrade 52223 .5 HP 7 Degree Offset Die Grinder or any of the Dynabrade range of tooling. Alternatively please call us on 01273 468736.