Product Description of Dynabrade 52052 Lightweight Dyninger Finishing Tool
• Lightweight Dyninger Air-Powered Abrasive Finishing Tool, for use with Spindle-Mount, Arbor-Mount and Eyelet Sanding Stars.
• 0-3,200 RPM, .4 hp. For running arbor-mount abrasive stars or Dynacushion wheel. Includes 12980 Arbor (1/2" diameter) for mounting up to five 4" diameter arbor-mount sanding stars (1/2" center hole). Arbor includes spacers to be used between the stars for added flexibility. (Stars sold separately.)
• For whitewood/sealer sanding, light deburring of metal, or fabrication and finishing of composite surfaces.
• Excellent for use on wooden parts, moldings, raised panels and intricate profiles. Eliminates raised grain and removes loose fibers when whitewood sanding as well as scuffing sealer coats.
• Tool includes 94407 Air-Flow Control Dynaswivel fitting for maximum tool maneuverability and control.
Parts Manuals for the Dynabrade 52052 Lightweight Dyninger Finishing Tool
Find the five digit number for your part(s) in the parts manual below, and click the link to open a new tab where you can add it to your basket. Please note that depending on the age of your tool this may not be the correct parts manual - it should however state the range of serial numbers to which it applies at the top left/right of the first page.
Current Manual
Tune-Up Kit
Book a Dynabrade Repair
Vibration & Sound Readings for the Dynabrade 52052 Lightweight Dyninger Finishing Tool
Important Notice:
The vibration and sound readings provided for the Dynabrade 52052 Lightweight Dyninger Finishing Tool are based on laboratory testing carried out under controlled conditions.
Actual levels in use can vary significantly depending on factors such as the abrasive material, application, tool maintenance, and operator technique.
These figures should therefore be used as a guideline only. DynaShop and Dynabrade accept no liability for any decisions or assessments made using the listed data instead of measurements taken under your specific operating conditions.
| Vibration Level EN1296 (m/s²) | Uncertainty EN1296 (m/s²) | Vibration Test Method |
|---|---|---|
| Under 2.5 | S1049 |
| Sound Pressure (dBA) | Sound Power (dBA) |
|---|---|
| 79 | 90 |
Would you like this data emailed to you?
Fill out the form below and we’ll send the vibration and sound data for the Dynabrade 52052 Lightweight Dyninger Finishing Tool directly to your inbox.
On-Site Tool Demonstrations of the Dynabrade 52052 Lightweight Dyninger Finishing Tool
Please complete the form below to arrange a tool demonstration for the Dynabrade 52052 Lightweight Dyninger Finishing Tool or any of the Dynabrade range of tooling. Alternatively please call us on 01273 468736.