01273 468736

DynaShop Owned and Operated by SAIC

Dynabrade 49455 Drill

MRP: £1,119.00

£986.80 +VAT

Dynabrade 49455 Drill, Non-Vacuum


Product Description of Dynabrade 49455 Drill

• Accepts 1/4"-28 Male threaded drill bits, sold separately.
• Angle height of only 1.2" (30).
• Governor-controlled motor maintains speed under load.
• Extended rear muffler design; safety-lock lever included. USA Government National Stock Number 5130015498848.

Parts Manuals for the Dynabrade 49455 Drill

Find the five digit number for your part(s) in the parts manual below, and enter it in the search box at the top of the page to add it to your basket. Please note that depending on the age of your tool this may not be the correct parts manual - it should however state the range of serial numbers to which it applies at the top left/right of the first page.

Current Manual

Tune-Up Kit

Book a Dynabrade Repair

If you would like to book a repair for the Dynabrade 49455 Drill please use the form below. You will then receive an email - simply place a copy of this email in the box with your tool and send it to the address stated in the email.

Vibration & Sound Readings for the Dynabrade 49455 Drill

Vibration readings for the Dynabrade 49455 Drill are dependent on a number of factors that include the abrasive being used, the job in hand and operator experience. DynaShop or Dynabrade cannot be held responsible for the consequences of using the listed values for risk assessment, rather than actual values unique to each situation.

Vibration Level EN1296 (m/sec²)Uncertainty EN1296 (m/sec²)Vibration Test Method
N/AN/AISO 8662-5

Sound Pressure (dBA)Sound Power (dBA)

Would you like this data in an email?

Simply fill out the form below and the vibration data for the Dynabrade 49455 Drill will be sent to your email automatically.

[ps2id id='drill-speed-recommendation-chart' target=''/]Dynabrade 49455 Drill Recommended Drill Speed Chart for Various Materials Using High-Speed Steel (HSS) Drills*


On-Site Tool Demonstrations of the Dynabrade 49455 Drill

Please complete the form below to arrange a tool demonstration for the Dynabrade 49455 Drill or any of the Dynabrade range of tooling. Alternatively please call us on 01273 468736.

Book a Tool Demonstration

    For our privacy policy please click here.

Video of the Dynabrade 49455 Drill

Additional information

Tool Type

Model Number


Air Inlet Thread

1/4" NPT

Vacuum Type

Max. RPM

Exhaust Type


Power HP (W)

Consumable Shape

Item Weight (kgs)

Packaged Weight (kgs)

Other Specifications

, , , , ,

Vibration Level (m/sec²)


Vibration Method

Sound Pressure (dBA)

Sound Power (dBA)