Description
Product Description of Dynabrade 49135 Angle Head Drill , Central Vacuum
The Dynabrade 49135 Angle Head Drill , Central Vacuum is a Dynabrade tool within the Drill category of tooling range. Drillbits of can be used which can also be supplied by DynaShop. A Central tool with a maximum RPM of 3200, a power rating (hp/W) of with a weight of kg.
Accessories for the Dynabrade 49135 Angle Head Drill , Central Vacuum
Consumables for the Dynabrade 49135 Angle Head Drill , Central Vacuum
No products were found matching your selection.
[ps2id id='drill-speed-recommendation-chart' target=''/]Dynabrade 49135 Angle Head Drill , Central Vacuum Recommended Drill Speed Chart for Various Materials Using High-Speed Steel (HSS) Drills*
On-Site Tool Demonstrations of the Dynabrade 49135 Angle Head Drill , Central Vacuum
Please complete the form below to arrange a tool demonstration for the Dynabrade 49135 Angle Head Drill , Central Vacuum or any of the Dynabrade range of tooling. Alternatively please call us on 01273 468736.
Book a Tool Demonstration
Video of the Dynabrade 49135 Angle Head Drill , Central Vacuum
Similar Tools to the Dynabrade 49135 Angle Head Drill , Central Vacuum
-
Dynabrade 53435 Drill, Non-Vacuum
MRP: £846.00£713.35 +VAT Add to basketCompare -
Dynabrade 53143 1/2″ Drill, Hole Saw, Non-Vacuum
MRP: £1,050.00£885.36 +VAT Add to basketCompare -
Dynabrade 53105 3/8″ Drill For Sytem, Central Vacuum
MRP: £1,077.00£908.13 +VAT Add to basketCompare -
Dynabrade 53106 1/2″ Drill For Sytem, Central Vacuum
MRP: £1,142.00£962.94 +VAT Add to basketCompare -
Dynabrade 53103 3/8″ Drill, Central Vacuum
MRP: £902.00£760.57 +VAT Add to basketCompare -
Dynabrade 53104 3/8″ Drill, Central Vacuum
MRP: £902.00£760.57 +VAT Add to basketCompare -
Dynabrade 53096 3/8″ Drill, Non-Vacuum
MRP: £568.00£478.94 +VAT Add to basketCompare -
Dynabrade 53094 3/8″ Drill, Non-Vacuum
MRP: £855.00£720.94 +VAT Add to basketCompare
Parts Manuals for the Dynabrade 49135 Angle Head Drill , Central Vacuum
Find the five digit number for your part(s) in the parts manual below, and enter it in the search box at the top of the page to add it to your basket. Please note that depending on the age of your tool this may not be the correct parts manual - it should however state the range of serial numbers to which it applies at the top left/right of the first page.
Current Manual
Tune-Up Kit
Book a Dynabrade Repair
If you would like to book a repair for the Dynabrade 49135 Angle Head Drill , Central Vacuum please use the form below. You will then receive an email - simply place a copy of this email in the box with your tool and send it to the address stated in the email.
