Product Description of Dynabrade 14200 Dynangle Abrasive Belt Tool
• Powerful direct-drive air motor with adjustable speed. Compact tool is ideal for work in tight spots; handle is multi-positional. Perfect for blending radiuses and adding grain to stainless steel sinks.
• Quick and easy abrasive belt change. Accepts coated abrasive belts and non-woven nylon belts.
• Interchangeable Contact Arms match specific applications on stainless steel (see below). Also ideal for refinishing drilling screws and pump screws.
• Includes 14266 Contact Arm and 11605 Hard/Cork Dynapad Platen Pad.
Parts Manuals for the Dynabrade 14200 Dynangle Abrasive Belt Tool
Find the five digit number for your part(s) in the parts manual below, and enter it in the search box at the top of the page to add it to your basket. Please note that depending on the age of your tool this may not be the correct parts manual - it should however state the range of serial numbers to which it applies at the top left/right of the first page.
Book a Dynabrade Repair
Vibration & Sound Readings for the Dynabrade 14200 Dynangle Abrasive Belt Tool
Vibration readings for the Dynabrade 14200 Dynangle Abrasive Belt Tool are dependent on a number of factors that include the abrasive being used, the job in hand and operator experience. DynaShop or Dynabrade cannot be held responsible for the consequences of using the listed values for risk assessment, rather than actual values unique to each situation.
|Vibration Level EN1296 (m/sec²)||Uncertainty EN1296 (m/sec²)||Vibration Test Method|
|Sound Pressure (dBA)||Sound Power (dBA)|
Would you like this data in an email?
Simply fill out the form below and the vibration data for the Dynabrade 14200 Dynangle Abrasive Belt Tool will be sent to your email automatically.
Contact Arms for the Dynabrade 14200 Dynangle Abrasive Belt Tool
Contact arms are able to extend the capabilities of your Dynabrade 14200 Dynangle Abrasive Belt Tool as each arm is capable of carrying out a variety of different tasks. Contact arms can make difficult to reach areas easier to access and can also be used for specific purposes such as corner weld removal, strap polishing on tubes, seam removal on pipes or deburring edges. A number of contact arms also have platen pads for flat filing, which can be purchased and replaced when worn.
On-Site Tool Demonstrations of the Dynabrade 14200 Dynangle Abrasive Belt Tool
Please complete the form below to arrange a tool demonstration for the Dynabrade 14200 Dynangle Abrasive Belt Tool or any of the Dynabrade range of tooling. Alternatively please call us on 01273 468736.
Book a Tool Demonstration
Video of the Dynabrade 14200 Dynangle Abrasive Belt Tool
|Air Inlet Thread|
|Power HP (W)|
|Item Weight (kgs)|
|Packaged Weight (kgs)|
Height Inches (mm): 5" (127), Hose Internal Diameter Inches (mm): 3/8" (10), Item Weight: 2.3 kg, Length Inches (mm): 11" (279), Max. Air Flow/Range @ 90 PSIG (6.2 Bar) SCFM (L/Min.): 36 (1,020), Max. SFPM (SM/Min.): 6,540 (1,987), Packaged Weight: 2.7 kg
|Vibration Level (m/sec²)|
|Sound Pressure (dBA)|
|Sound Power (dBA)|