Product Description of the 38x610mm Zirconia Sanding Belts, 21/Pack
38x610mm Zirconia Sanding Belts have a zirconia grain, which lasts considerably longer and cuts more quickly than aluminium oxide. This is due to its self-sharpening grain which does not dull as quickly.
Due to the very aggressive and fast-cutting nature of the grain, zirconia is generally only available in the coarse to medium grit range (often no finer than P120), any finer than this and the belt is entirely aluminium oxide.
Zirconia is in some cases supplied with a "topsize" (also known as "top coat", or "supersize layer".) This is a coating which is sprayed on to the grit to act as a coolant when working on heat-sensitive metals such as stainless steel and exotic alloys, and therefore reduce discoloration or burning. It can however also act as a lubricant to help reduce loading (where stock removed from the workpiece builds up on the abrasive and makes it less effective) on softer metals such as aluminium. The presence of a topsize does reduce the aggressiveness of the grain however, and so it is best not to have one if discoloration will not be an issue, for example when working on mild/carbon or structural steel.
38x610mm Zirconia Sanding Belts have a strong X-weight cotton backing, which is easier to cut and slightly more flexible than a heavy/rigid polyester material, and so is most suited to file belts in particular. As it is cotton-backed it does however mean that these belts are only suitable for dry use.
The 38x610mm Zirconia Sanding Belts, 21/Pack is a Belt with a size of 38x610mm and a vacuum type of Non-Vacuum. The 38x610mm Zirconia Sanding Belts, 21/Pack can be fitted to the category/categories and can be purchased directly from us. If you have any queries with regards to the 38x610mm Zirconia Sanding Belts, 21/Pack please do not hesitate in contacting us on the number above, email or start a web chat.
Dynabrade Tool Manuals
If you need parts we have available all Dynabrade tool manuals (both past and present.) Please search for your parts manual below using the 5 digit model number of your tool, which will then give you a breakdown and diagram of all the parts for that specific model. With these part numbers you can search for the correct parts for your tool and simply place an order for these online.
When looking for parts online please keep a note of your tool's serial number, as in some cases the model may have been re-designed and therefore have a new manual. You can check whether a manual is suitable for your model by looking at the top left hand corner of the first page, which will generally reference the range of serial numbers to which it applies. If you already know your part number, please enter it in the box below. Add rows to add more parts. [wcbulkorder]