01273 468736

DynaShop Owned and Operated by SAIC

Get the Right Tool First Time

Skip the guesswork and use the FindMyTool assistant to match tools to your job in seconds.

Start Searching

Dynabrade 4″ Dia. Cut-Off Wheel Tools

Air-Powered Cutting Tools, 4″ Diameter For Efficient Cutting of Sheet Metal, Frame Rails, Clamps, Bolts, etc.

• Models accepts optional 4″ diameter Type 41 reinforced Cut-Off Wheels, with 3/8″ center hole.
• “Dual-wick” lubrication system saturates gears with oil for increased performance, extended life and reduced downtime.
• Adjustable wheel guard provides maximum operator protection.
• Safety-lock lever is included.

Right Angle, .7 hp, Rear Exhaust

4 Inch Cut-Off Wheel Tools Image{2}

Composite Housing Models

• Models include aluminum right angle housing.
Model 54734 – 13,500 RPM
• Includes side handle for left or right-hand use.
Model 54736 – Extended, 13,500 RPM
• Extension design allows longer reach on work piece, and two-hand control for added comfort.

Steel Housing Models

• Steel housings offer increased durability!
• Models include steel right angle housing.
Model 54744 – 13,500 RPM
• Includes side handle for left or right-hand use.
Model 54746 – Extended, 13,500 RPM
• Extension design allows longer reach on work piece, and two-hand control for added comfort.

4 Inch Cut-Off Wheel Tools Image{3}

7º Offset, .7 hp, Front Exhaust

• Both models accept optional 4″ diameter reinforced Type 41 Cut-Off Wheels with 3/8″ center hole. (Wheel width of 1/32″ – 1/8″.)
• Gearless motor design for reduced maintenance and downtime.
• Tool handle is offset 7º for greater operator comfort.
• Safety-lock lever is included; rear exhaust.
Model 52430 – 15,000 RPM
Model 52431 – 20,000 RPM

Straight Line, 1 hp, Rear Exhaust

• Each model accepts optional 4″ diameter reinforced Type 41 Cut-Off Wheels with 3/8″ center hole. (Wheel width of 1/32″ – 1/8″.)
• Governor controlled motor to maintain RPM under heavy load.
• Safety-lock lever is included.
Model 52573 – 15,000 RPM
Model 52574 – 18,000 RPM

Straight Line, 1 hp, 6″ Extension

• Each model accepts optional 4″ diameter reinforced Type 41 Cut-Off Wheels with 3/8″ center hole. (Wheel width of 1/32″ – 1/8″.)
• Governor controlled motor to maintain RPM under heavy load.
• Safety-lock lever is included; rear exhaust.
Model 52579 – 15,000 RPM
Model 52580 – 18,000 RPM

4 Inch Cut-Off Wheel Tools Image{4-1}
4 Inch Cut-Off Wheel Tools Image{5}
4 Inch Cut-Off Wheel Tools Image{6}
4 Inch Cut-Off Wheel Tools Specs Table{2}

Showing all 9 results