Description
Product Description of Dynabrade 53984 2-3/4" (70mm) W x 11" (278mm) L Interface Pad, Double-Sided Hook-Face
• Attaches between sanding pad and hook-face abrasive.
• Soft foam increases conformability allowing operator to easily follow contours. Converts standard pad into a fine finishing and finessing pad!
• Interface pad easily contours to most surfaces.
• For Dynaline and Dynabug Sanders.
The Dynabrade 53984 2-3/4" (70mm) W x 11" (278mm) L Interface Pad, Double-Sided Hook-Face is a Interface Pad which can be purchased directly from us. If you have any queries with regards to the Dynabrade 53984 2-3/4" (70mm) W x 11" (278mm) L Interface Pad, Double-Sided Hook-Face please do not hesitate in contacting us on the number above, email or start a web chat.
Dynabrade•Tool Manuals
If the Dynabrade 53984 2-3/4" (70mm) W x 11" (278mm) L Interface Pad, Double-Sided Hook-Face is not what you require or you need more parts we have available all Dynabrade tool manuals (both past and present.) Please search for your parts manual below using the 5 digit model number of your tool, which will then give you a breakdown and diagram of all the parts for that specific model. With these part numbers you can search for the correct parts for your tool and simply place an order for these online.
Dynabrade Parts
When looking for parts online please keep a note of your tool's serial number, as in some cases the model may have been re-designed and therefore have a new manual. You can check whether a manual is suitable for your Dynabrade 53984 2-3/4" (70mm) W x 11" (278mm) L Interface Pad, Double-Sided Hook-Face by looking at the top left hand corner of the first page, which will generally reference the range of serial numbers to which it applies. If you already know your part number, please enter it in the box below.
• Service & Repair
If you are unsure of how to replace the necessary parts and wish to maximize the value, reliability and safety of your Dynabrade tools, have them repaired by Dynabrade factory experts. Dynabrade operate a service and repair centre in the UK and all work is carried out by qualified Dynabrade engineers, with 98% of all repairs and services completed within 48 hours.
