Product Description of the Norton R976 Red-X Ceramic Belts 38x610mm, Grits 36 - 120, 14/Pack
Norton R976 Red-X Ceramic Belts 38x610mm, Grits 36 - 120, 14/Pack
Suitable for Dynabrade (and other manufacturer equivalents) Model/Contact Arm 66402
- Strong polyester cloth
- New friable ceramic SG grain
- High performance phenolic resin
- Third layer: a new high performance formulation of supersize
- Excellent belt performance on medium to hard contact wheels
- Good consistent cut rate even at low and medium pressure
- Low heat generation reduces risk of burn
- Excellent on various material types; from Stainless Steel to Inconel to Titanium
- Reduce your cost per part
The Norton R976 Red-X Ceramic Belts 38x610mm, Grits 36 - 120, 14/Pack is a Belt with a size of 38x610mm and a vacuum type of Non-Vacuum. The Norton R976 Red-X Ceramic Belts 38x610mm, Grits 36 - 120, 14/Pack can be fitted to the category/categories and can be purchased directly from us. If you have any queries with regards to the Norton R976 Red-X Ceramic Belts 38x610mm, Grits 36 - 120, 14/Pack please do not hesitate in contacting us on the number above, email or start a web chat.
Dynabrade Tool Manuals
If you need parts we have available all Dynabrade tool manuals (both past and present.) Please search for your parts manual below using the 5 digit model number of your tool, which will then give you a breakdown and diagram of all the parts for that specific model. With these part numbers you can search for the correct parts for your tool and simply place an order for these online.
When looking for parts online please keep a note of your tool's serial number, as in some cases the model may have been re-designed and therefore have a new manual. You can check whether a manual is suitable for your model by looking at the top left hand corner of the first page, which will generally reference the range of serial numbers to which it applies. If you already know your part number, please enter it in the box below. Add rows to add more parts.
Service & Repair
If you are unsure of how to replace the necessary parts and wish to maximize the value, reliability and safety of your Dynabrade tools, have them repaired by Dynabrade factory experts. Dynabrade operate a service and repair centre in the UK and all work is carried out by qualified Dynabrade engineers, with 98% of all repairs and services completed within 48 hours.
BOOK A REPAIR
Recommended Tools for the Norton R976 Red-X Ceramic Belts 38x610mm, Grits 36 - 120, 14/Pack