01273 468736

DynaShop Owned and Operated by SAIC

ON-SITE TOOL DEMONSTRATIONS
Specialist advice to reduce your process times and improve efficiency, with the aim of saving you time & money.
BOOK SITE VISIT ›
FREE DELIVERY
For Orders £100+
TOOL SERVICING & REPAIRS
Send us your air tools for servicing to get them back up and running as good as new, with free advice on preventative maintenance.
BOOK TOOL REPAIR ›

Dynabrade 57926 6″ (152mm) Dia. Dynabug “Model T” Orbital Sander, Non-Vacuum (Discontinued)

MRP: £261.44

Go to Parts Manual

Dynabrade 57926 6″ (152mm) Dia. Dynabug “Model T” Orbital Sander, Non-Vacuum

Description

Product Description of Dynabrade 57926 6" (152mm) Dia. Dynabug "Model T" Orbital Sander, Non-Vacuum (Discontinued)

• 3/32" diameter orbital action is ideal for fine finishes. Lightweight only 1 lb! Palm-style, ergonomic design features low profile grip for greater operator comfort and control. Operates 8-9 SCFM at 90 PSIG. Can be run by as little as 3 horsepower compressor.
• Low maintenance; easy to repair. Turbine-style vaneless air motor needs no oil!
• Easy interchangeable sanding pads. Uses reattachable and PSA (adhesive-backed) abrasive sheets and discs; coated and non-woven nylon.
• Includes 6" Diameter 56269 Vinyl-Face Pad.

The Dynabrade 57926 6" (152mm) Dia. Dynabug "Model T" Orbital Sander, Non-Vacuum (Discontinued) has a Refined Ergonomic Tool Grip that allows for a more comfortable grip and feel, reducing operator fatigue and increasing efficiency. Perfectly-balanced, weight-mated sanding pad with exclusive single-piece hub design. Dynabrade premium urethane pads offer smoother operating performance and minimal vibration. To read our guide on choosing the correct Dynorbital please click here.



Parts Manuals for the Dynabrade 57926 6" (152mm) Dia. Dynabug "Model T" Orbital Sander, Non-Vacuum (Discontinued)

Find the five digit number for your part(s) in the parts manual below, and click the link to open a new tab where you can add it to your basket. Please note that depending on the age of your tool this may not be the correct parts manual - it should however state the range of serial numbers to which it applies at the top left/right of the first page.

Current Manual

Tune-Up Kit

Book a Dynabrade Repair

If you would like to book a repair for the Dynabrade 57926 6" (152mm) Dia. Dynabug "Model T" Orbital Sander, Non-Vacuum (Discontinued) please use the form below. You will then receive an email - simply place a copy of this email in the box with your tool and send it to the address stated in the email.

Vibration & Sound Readings for the Dynabrade 57926 6" (152mm) Dia. Dynabug "Model T" Orbital Sander, Non-Vacuum (Discontinued)

Please note – The vibration readings provided for the Dynabrade 57926 6" (152mm) Dia. Dynabug "Model T" Orbital Sander, Non-Vacuum (Discontinued) are based on laboratory results in very specific sets of conditions. Vibration levels are dependent on a number of factors that include, among many others; the abrasive being used, the job in hand and operator experience. DynaShop or Dynabrade cannot be held responsible for the consequences of using the listed values for risk assessment, rather than real-world values measured in your own specific application.

Vibration Level EN1296 (m/sec²)Uncertainty EN1296 (m/sec²)Vibration Test Method
Under 2.51.3ISO 8662-8

Sound Pressure (dBA)Sound Power (dBA)
7081

Would you like this data in an email?

Simply fill out the form below and the vibration data for the Dynabrade 57926 6" (152mm) Dia. Dynabug "Model T" Orbital Sander, Non-Vacuum (Discontinued) will be sent to your email automatically.

On-Site Tool Demonstrations of the Dynabrade 57926 6" (152mm) Dia. Dynabug "Model T" Orbital Sander, Non-Vacuum (Discontinued)

Please complete the form below to arrange a tool demonstration for the Dynabrade 57926 6" (152mm) Dia. Dynabug "Model T" Orbital Sander, Non-Vacuum (Discontinued) or any of the Dynabrade range of tooling. Alternatively please call us on 01273 468736.

Book a Tool Demonstration

    For our privacy policy please click here.

Video of the Dynabrade 57926 6" (152mm) Dia. Dynabug "Model T" Orbital Sander, Non-Vacuum (Discontinued)

Additional information

Model Number

57926

Tool Type

Air Inlet Thread

1/4" NPT

Vacuum Type

Max. RPM

Exhaust Type

Consumable Shape

Consumable Size

Orbit Diameter

Pad Fixing Type

Item Weight (kgs)

Packaged Weight (kgs)

Other Specifications

, , , , , ,

Vibration Level (m/sec²)

Uncertainty

Vibration Method

Sound Pressure (dBA)

Sound Power (dBA)