01273 468736

DynaShop Owned and Operated by SAIC

ON-SITE TOOL DEMONSTRATIONS
Specialist advice to reduce your process times and improve efficiency, with the aim of saving you time & money.
BOOK SITE VISIT ›
FREE DELIVERY
For Orders £100+
TOOL SERVICING & REPAIRS
Send us your air tools for servicing to get them back up and running as good as new, with free advice on preventative maintenance.
BOOK TOOL REPAIR ›

Discontinued – Dynabrade 10288 5″ (127mm) Dia. Wet Dynabug “Model T” Orbital Sander

Go to Parts Manual

Discontinued – Dynabrade 10288 5″ (127mm) Dia. Wet Dynabug “Model T” Orbital Sander

SKU: Dynabrade 10288 Categories: , Tags: , ,

Description

Product Description of Discontinued - Dynabrade 10288 5" (127mm) Dia. Wet Dynabug "Model T" Orbital Sander

Self-siphoning. Includes 20 ft. (6 m) of water hose, siphon weight with replaceable water filter and foam interface pad. Ultra-lightweight, just over 1 lb (.5 kg)! Stainless steel components never rust.
20,000 RPM tool never needs oil! Easy-adjust water valve with on/off and fast/slow selection. Fast, smooth and uniform surface preparation; reduced labor time.
Our unique water feed through-the-pad design allows use of standard round wet paper with holes. No special sand paper or hole punch needed! Up to 3/16" (5) diameter orbital action with adjustable speed control.
Includes standard 5" Dia. Hook-Face Pad (58086) and soft 5" Dia. Interface Pad (53978).
Interface pads available for contours. Soft foam increases conformability, allowing operator to easily follow contours. Converts standard pad into a fine finishing and finessing pad! Attaches between sanding pad and hook n loop abrasive.

The Discontinued - Dynabrade 10288 5" (127mm) Dia. Wet Dynabug "Model T" Orbital Sander has a Refined Ergonomic Tool Grip that allows for a more comfortable grip and feel, reducing operator fatigue and increasing efficiency. Perfectly-balanced, weight-mated sanding pad with exclusive single-piece hub design. Dynabrade premium urethane pads offer smoother operating performance and minimal vibration. To read our guide on choosing the correct Dynorbital please click here.



Parts Manuals for the Discontinued - Dynabrade 10288 5" (127mm) Dia. Wet Dynabug "Model T" Orbital Sander

Find the five digit number for your part(s) in the parts manual below, and click the link to open a new tab where you can add it to your basket. Please note that depending on the age of your tool this may not be the correct parts manual - it should however state the range of serial numbers to which it applies at the top left/right of the first page.

Current Manual

Tune-Up Kit

Book a Dynabrade Repair

If you would like to book a repair for the Discontinued - Dynabrade 10288 5" (127mm) Dia. Wet Dynabug "Model T" Orbital Sander please use the form below. You will then receive an email - simply place a copy of this email in the box with your tool and send it to the address stated in the email.

Vibration & Sound Readings for the Discontinued - Dynabrade 10288 5" (127mm) Dia. Wet Dynabug "Model T" Orbital Sander

Please note – The vibration readings provided for the Discontinued - Dynabrade 10288 5" (127mm) Dia. Wet Dynabug "Model T" Orbital Sander are based on laboratory results in very specific sets of conditions. Vibration levels are dependent on a number of factors that include, among many others; the abrasive being used, the job in hand and operator experience. DynaShop or Dynabrade cannot be held responsible for the consequences of using the listed values for risk assessment, rather than real-world values measured in your own specific application.

Vibration Level EN1296 (m/sec²)Uncertainty EN1296 (m/sec²)Vibration Test Method
2.91.5ISO 8662-8

Sound Pressure (dBA)Sound Power (dBA)
7687

Would you like this data in an email?

Simply fill out the form below and the vibration data for the Discontinued - Dynabrade 10288 5" (127mm) Dia. Wet Dynabug "Model T" Orbital Sander will be sent to your email automatically.

Additional information

Tool Type

Item Weight (kgs)

Model Number

10288

Packaged Weight (kgs)

Consumable Shape

Consumable Size

Thread Size

4 Screws

Max. RPM

Exhaust Type

Orbit Diameter

Other Specifications

, , ,

Vibration Level (m/sec²)

Uncertainty

Vibration Method

Sound Pressure (dBA)

Sound Power (dBA)

GTIN

0616026102880

Air Inlet Thread

1/4" NPT