01273 468736

DynaShop Owned and Operated by SAIC

Dynabrade 10288 5″ (127mm) Dia. Wet Dynabug “Model T” Orbital Sander

MRP: £373.00

£391.65 +VAT

Dynabrade 10288 5″ (127mm) Dia. Wet Dynabug “Model T” Orbital Sander, 20,000 RPM, 3/16″ (5 mm) Dia. Orbit, Rear Exhaust

Description

[ps2id id='description' target=''/]Product Description of Dynabrade 10288 5" (127mm) Dia. Wet Dynabug "Model T" Orbital Sander

Self-siphoning. Includes 20 ft. (6 m) of water hose, siphon weight with replaceable water filter and foam interface pad. Ultra-lightweight, just over 1 lb (.5 kg)! Stainless steel components never rust.
20,000 RPM tool never needs oil! Easy-adjust water valve with on/off and fast/slow selection. Fast, smooth and uniform surface preparation; reduced labor time.
Our unique water feed through-the-pad design allows use of standard round wet paper with holes. No special sand paper or hole punch needed! Up to 3/16" (5) diameter orbital action with adjustable speed control.
Includes standard 5" Dia. Hook-Face Pad (58086) and soft 5" Dia. Interface Pad (53978).
Interface pads available for contours. Soft foam increases conformability, allowing operator to easily follow contours. Converts standard pad into a fine finishing and finessing pad! Attaches between sanding pad and hook n loop abrasive.

The Dynabrade 10288 5" (127mm) Dia. Wet Dynabug "Model T" Orbital Sander is a Dynabrade tool within the Dynabug category of tooling range. Coated abrasives and surface conditioning material Velcro Discs of 127mm can be used which can also be supplied by DynaShop. A tool with a maximum RPM of 20000, a power rating of with a weight of 0.54kgs.

cut-400250The Dynabrade 10288 5" (127mm) Dia. Wet Dynabug "Model T" Orbital Sander has a Refined Ergonomic Tool Grip that allows for a more comfortable grip and feel, reducing operator fatigue and increasing efficiency. Perfectly-balanced, weight-mated sanding pad with exclusive single-piece hub design. Dynabrade premium urethane pads offer smoother operating performance and minimal vibration. To read our guide on choosing the correct Dynorbital please read here.

Accessories for the Dynabrade 10288 5" (127mm) Dia. Wet Dynabug "Model T" Orbital Sander

Dynabrade 94300

Consumables for the Dynabrade 10288 5" (127mm) Dia. Wet Dynabug "Model T" Orbital Sander

Vibration Readings for the Dynabrade 10288 5" (127mm) Dia. Wet Dynabug "Model T" Orbital Sander

Vibration readings for the Dynabrade 10288 5" (127mm) Dia. Wet Dynabug "Model T" Orbital Sander are dependent on a number of factors that include the abrasive being used, the job in hand and operator experience. DynaShop or Dynabrade cannot be held responsible for the consequences of using the listed values for risk assessment, rather than actual values unique to each situation.

 Vibration Level EN1296 (m/sec²)Uncertainty EN1296 (m/sec²)Vibration Test Method
Current (3 Axis)3.20.8ISO 28927-3
Previous (Dominant Axis)2.91.5ISO 8662-8

Would you like this data in an email?

Simply fill out the form below and the vibration data for the Dynabrade 10288 5" (127mm) Dia. Wet Dynabug "Model T" Orbital Sander will be sent to your email automatically.

    For our privacy policy please click here.

You can down load the HSE leaflet that explores the jobs which are affected; how to assess and control the risk; what employees need to know; and health surveillance measures. It will help you understand what you need to do to comply with the Control of Vibration at Work Regulations 2005 (The Vibration Regulations 2005).


Health and Safety Executive: Hand-Arm Vibration Guide


Please Note:

Published vibration levels are in accordance with standards EN 12096, ISO 20643 and ISO 28927 series; published sound levels are in accordance with standard ISO 15744. Vibration and sound levels shown are the result of laboratory testing in conformity with these codes and standards, but are not sufficient for risk evaluation. Values measured in a specific workplace may differ from declared values. Actual exposure values and associated risk will be unique to each workplace and workstation. Potential risk to each individual depends on a variety of factors such as workstation design, surrounding environment, operator proficiency, material being worked and amount of exposure time. The employer is responsible for adhering to any applicable legal requirements regarding workplace health and safety and for evaluation of actual vibration and sound levels based on factors affecting the workplace environment. DynaShop or Dynabrade cannot be held responsible for the consequences of using the listed values for risk assessment, rather than actual values unique to each situation.

Sound and Decibel Readings of the Dynabrade 10288 5" (127mm) Dia. Wet Dynabug "Model T" Orbital Sander

Sound Pressure (dBA)Sound Power (dBA)
7687

The Control of Noise at Work Regulations 2005 (Noise Regulations 2005) require employers to prevent or reduce risks to health and safety from exposure to noise at work.

Would you like this data in an email?

Simply fill out the form below and the vibration data for the Dynabrade 10288 5" (127mm) Dia. Wet Dynabug "Model T" Orbital Sander will be sent to your email automatically.

    For our privacy policy please click here.

Similar Tools to the Dynabrade 10288 5" (127mm) Dia. Wet Dynabug "Model T" Orbital Sander

Parts Manuals for the Dynabrade 10288 5" (127mm) Dia. Wet Dynabug "Model T" Orbital Sander

Find the five digit number for your part(s) in the parts manual below, and enter it in the search box at the top of the page to add it to your basket. Please note that depending on the age of your tool this may not be the correct parts manual - it should however state the range of serial numbers to which it applies at the top left/right of the first page.

Current Manual

Tune-Up Kit

Book a Dynabrade Repair

If you would like to book a repair for the Dynabrade 10288 5" (127mm) Dia. Wet Dynabug "Model T" Orbital Sander please use the form below. You will then receive an email - simply place a copy of this email in the box with your tool and send it to the address stated in the email.

  • Tool NameModel NumberComments 
    Add a row
    Testing costs £20+VAT per tool and includes a certificate showing the results.
    For our terms & conditions please click here
    For our privacy policy please click here.

Additional information

Tool Type

Item Weight (kgs)

Packaged Weight (kgs)

Consumable Shape

Consumable Size

Thread Size

4 Screws

Max. RPM

Exhaust Type

Orbit Diameter

Other Specifications

, , ,

Vibration Level (m/sec²)

Uncertainty

Vibration Method

Sound Pressure (dBA)

Sound Power (dBA)

GTIN

0616026102880

Model Number

10288

Reviews

There are no reviews yet.

Be the first to review “Dynabrade 10288 5″ (127mm) Dia. Wet Dynabug “Model T” Orbital Sander”

Your e-mail address will not be published. Required fields are marked *