01273 468736

DynaShop Owned and Operated by SAIC

ON-SITE TOOL DEMONSTRATIONS
Specialist advice to reduce your process times and improve efficiency, with the aim of saving you time & money.
BOOK SITE VISIT ›
FREE DELIVERY
For Orders £100+
TOOL SERVICING & REPAIRS
Send us your air tools for servicing to get them back up and running as good as new, with free advice on preventative maintenance.
BOOK TOOL REPAIR ›

Discontinued – Dynabrade 18001 .2 HP (149 W) Autobrade Red Straight-Line Die Grinder

Go to Parts Manual

Discontinued – Dynabrade 18001 .2 HP (149 W) Autobrade Red Straight-Line Die Grinder

SKU: Dynabrade 18001 Categories: , Tags: , , ,

Description

Product Description of Discontinued - Dynabrade 18001 .2 HP (149 W) Autobrade Red Straight-Line Die Grinder

Compact, lightweight design.
Includes safety-lock lever; rear exhaust.
Smooth, efficient air motor with built-in speed regulator.
Composite tool grip absorbs vibration and reduces cold air transmission.
Optional 6 mm collet insert: 18431.

The Discontinued - Dynabrade 18001 .2 HP (149 W) Autobrade Red Straight-Line Die Grinder is a Dynabrade tool within the Die Grinder category of tooling range. Burr, Mounted Points of can be used which can also be supplied by DynaShop. A tool with a maximum RPM of 25000, a power rating (hp/W) of 0.2 (149) with a weight of 0.59kg.

Parts Manuals for the Discontinued - Dynabrade 18001 .2 HP (149 W) Autobrade Red Straight-Line Die Grinder

Find the five digit number for your part(s) in the parts manual below, and click the link to open a new tab where you can add it to your basket. Please note that depending on the age of your tool this may not be the correct parts manual - it should however state the range of serial numbers to which it applies at the top left/right of the first page.

Current Manual

Tune-Up Kit

Book a Dynabrade Repair

If you would like to book a repair for the Discontinued - Dynabrade 18001 .2 HP (149 W) Autobrade Red Straight-Line Die Grinder please use the form below. You will then receive an email - simply place a copy of this email in the box with your tool and send it to the address stated in the email.

Vibration & Sound Readings for the Discontinued - Dynabrade 18001 .2 HP (149 W) Autobrade Red Straight-Line Die Grinder

Please note – The vibration readings provided for the Discontinued - Dynabrade 18001 .2 HP (149 W) Autobrade Red Straight-Line Die Grinder are based on laboratory results in very specific sets of conditions. Vibration levels are dependent on a number of factors that include, among many others; the abrasive being used, the job in hand and operator experience. DynaShop or Dynabrade cannot be held responsible for the consequences of using the listed values for risk assessment, rather than real-world values measured in your own specific application.

Vibration Level EN1296 (m/sec²)Uncertainty EN1296 (m/sec²)Vibration Test Method

Sound Pressure (dBA)Sound Power (dBA)
7990

Would you like this data in an email?

Simply fill out the form below and the vibration data for the Discontinued - Dynabrade 18001 .2 HP (149 W) Autobrade Red Straight-Line Die Grinder will be sent to your email automatically.

Additional information

Tool Type

Item Weight (kgs)

Packaged Weight (kgs)

Consumable Shape

,

Max. RPM

Power HP (W)

Exhaust Type

Other Specifications

, , , ,

Vibration Level (m/sec²)

Uncertainty

Vibration Method

Sound Pressure (dBA)

Sound Power (dBA)

GTIN

0616026180017

Model Number

18001

Air Inlet Thread

1/4" NPT